Do-it-yourself double bed chair made of wood. Do-it-yourself double bedroom, armchair and diagrams. Photos of double-tiered beds

There are a lot of recipes on the Internet that you can easily make yourself. We will not repeat them. We know how to work with your own hands easily, like the old ones, you can move on to children and onuks, seeing everything that is new. But it’s so easy and it’s unlikely to be more expensive for the cheapest purchase, and the cost of materials on it is next to nothing. True, it will take about 10 days, through necessary technological breaks.

All of them are made of wood, made entirely from environmentally friendly materials. When folded once, a small quantity of nitrogen adhesive is formed, and mostly absolutely inexpensive PVA. Look at the finished product approximately as shown on the baby. The shape and design of the corners with legs is up to you; The parameters and viscosity of the entire structure are not subject to any interference.
Our double bedroom has one more feature: the total number of visible connections - fastening heads, brackets, and their minimal strength. The created bed from Vikoristan has a lot of design and technological methods of wooden aircraft, as at the dawn of its history, it also has a lot of benefits for furniture makers.

Materials

The parts of the bed, which are truly amazing, are made of MDF with the texture of valuable wood or laminate; those other – 20-30 mm thick. Like hot pillows, then. The wobbly bottoms of the Vlasniks are not in the factory, you can generally get by with 16 mm blanks. It is important to MDF - not to laminate, but to do without nitro-glue and use PVA for everything; Do not glue laminated surfaces. Internal parts are made of wood or plywood 10-20 mm thick.

Let’s just say that it’s easier and cheaper to get either MDF or laminate from the nearest furniture shop. Buying the leaves yourself at a fraction of the price will cost you much more. The furniture is cut exactly to size and clamped - covered with PVC ends to match the texture or contrast, as you like. Edge thickness – 0.2-2 mm.

For lumber, you will need to buy timber 50x50 mm, approximately 8-8.5 m (can be in pieces), a couple of boards (30-40) x 100 mm, solid wood, 2 m long. boards 20x100 mm, dozens and dozens of pieces, 1.6 m each, wooden or original plywood, dozens to twenty, 2000x1600 mm. The boards are nicer, they smell cheaper, and the dimensions of a standard sheet of plywood with the dimensions of a spoon are poorly usable.

All lumber is cut, planed. The type of wood is whatever. There is no need for independent additional processing, except sawing according to size and selecting quarters and grooves.

Note: for a bed with drawers (div. further) you will need chipboard. You can find the cheapest one; the details of it are of lesser importance than detail. But for the flooring of the lounger, chipboard is not suitable, it is not springy.

Kriplennya

Expensive special fittings: minifixes, confirms, eccentric regulators are not included in the description of the design. At the same time, the value and durability of the product are greater for serial expressions, and the waste is less. It has become possible to achieve this thanks to the technology of production without having to endure painful interruptions. Professional furniture makers need to quickly select products for sale up to the standards of brightness, otherwise they will burn out. And it’s easy to scratch yourself, and you won’t be able to bring it to perfect condition. Vikorist furniture, and it was possible to obtain a simpler, cheaper and more beautiful design from the factory.

Strengthening you will need to attack:

Samonaris 5-6 mm, original phosphated (black, cheapest). Dovzhina is the sum of the parts that come together minus 10 mm. How many of them are protected according to the design described below.
Flowers 60-70 mm.
Steel rolls with a stiff edge.

Note: because All joints vibrate due to gluing, then the finest screws themselves are phosphated, their surface is lightly rusty. On a smooth surface, the PVA fastening will be thicker.

Special respect is given to the heaps of traces. First of all, a rib of tenderness. It is broad and rounded, as shown in a baby. Otherwise, the surface of the stamped and stamped material will be absolutely smooth. Teasing, brizh - a sign of gray, and then scorched and overtightened metal. Such bundles are fragile and can crack for no apparent reason.

Z'ednannya

All connections, as they say, are tied to the glued ones. Apply glue on a flat surface in a cowboy zigzag (on the offended surface), spread it with a small toothed spatula. Then it is exposed to a rare finish (3-10 minutes), the parts are collected from the fabric and fastened with metal fasteners, also with glue, div. lower.

Samonarizi

Under the screws behind, on dry parts, drill blind openings. Glibina - 2/3 of the screw. Diameter – 3/4 of the thickness of the screw body without reaming. For 5 mm screws it will be 2.5 mm; for 6 mm – 3 mm. To accurately obtain the openings at the assembled assemblies, the parts to be joined are immediately clamped together with clamps, at the ends and between the edges, one at a time 0.5 m apart.

Butt rozrahunku: It is permissible to join a frame beam with a drawer frame with 20 mm MDF, div. Zagalna tovshchina – 70 mm. Samonariza required 10 mm shorter, div. vische; take 6x60 mm. Open under them carefully with a depth of 40 mm. A five-tenth beam with which you won’t be pierced through. This means that you need to glue and tighten the screws using clamps.

Note: At the factory, the timber would have been drilled through, and a solid plank would have been drilled into the bottom. This is only for the sake of smoothness and ease of folding. When you do this, you will feel very relaxed. For yourself, it’s better to work diligently, but it’s more valuable. Also, before speaking, it’s best to hesitate and make exclusive arrangements.

Farther away, droplets of water-polymer emulsion are allowed to burn in the blind openings. Once you get there (a bunch of quills), use a thin stick to coat the middle with PVA. Then glue is applied to the surface as described above, the parts are squeezed with clamps and dry screws are driven in. Applying glue to the grooves does not make sense - when sunburned, it will appear along the grooves. The glue in the opening and the screw is embedded in the wood; This mass is based on a mixture of glue pears, which carefully removes the details, like an anchor. The clamps can be removed through the extractor after assembly.

Notes:

Were there screws in the withered old furniture that fell out of the wood, that stuck to the grooves, or fiberboard? They drove them into the glue, machuchi, and didn’t open them in the middle with any grease.

Water-polymer emulsion is not sold in separate packages; a repeat bottle is required. Therefore, instead of it, it is diluted with water 3-5 times, until it reaches the water level, a little PVA. Prepared in smaller portions if necessary: the spontaneous emulsion is not preserved in a closed container.

Tsvyakhi

For flowers, there is no need to drill anything in advance: we glue the parts together under bends and clamps, then fasten them with flowers. But there are still two nuances:

Flowers need to be taken with a ring moth (div. Mal. Right-handed). Itself with a ring, and not a spiral or a dotted one.
It needs to be slaughtered after 12-16 years. after gluing; bazhano – without knowing the squeeze or privacy. If the place under the flowers is covered, then, having taken the pressure and hammered, we squeeze the parts again until gluing is completed.

The point here is that the flower nozzle drives the undried excess glue into the wood. Even when the flowers of the tree wither, everything is still important.

Shkanti and nageli

Shkanti bachili, maybe, mustache, don’t know what it is. A dowel is a round piece of wood in two blind holes that secretly connects the wooden parts. Dowel joints are extremely widely used in furniture and carpentry, but, unfortunately, they dry out over time and stop trimming. For durability, the dowels must be replaced with dowels. In serial production, the fermentation pins are not used - the production process intensifies and the consistency of the product becomes unpleasant.

How the dowel comes out from the dowel is shown in the left position of the right-handed baby:

The hole in the middle is soaked with emulsion and coated with glue;
At the end of the bean, lightly, without falling out, we drive (embrace) the blade of the bead about 1 mm from hard wood or fiberglass;
The dowel (also called dowel) is driven into the hole with a mallet;
We attach the same blade to the surface of the dowel that protrudes;
It leaks and coats the hole at the tip;
The part is received firmly and beaten with a mallet until it fits tightly.

The most important mental reliability of the connection is that the wedge is oriented across the grain of the wood, left pos. to the baby. Where the parts are connected under the cut - along the bisector of the cut. When connected under a straight edge - with a turn of 45 degrees at any angle. In this case, the wedges from the opposite sides of the pin will be perpendicular to each other.

The maximum permissible diameter of the boss is half the thickness of the board or the smallest size of the parts to be joined. Minimum – 5% of the width of the board, but not less than 5 mm. Thus, for a board 30x200 the required beans are 10-12 mm, and for beams 50x50 - 15-20 mm. The number of beans is 2-3 of their diameter. The depth of the hole in a thin piece is half a meter.

The nails have been trimmed and without gluing for decades in the best possible use. And from the pecks and in the house - for generations, and the wood may not have a stained, low bone, then. cheap.

Before we go home : dowels were used to sew the drakkars and knorries of the Vikings, the kogs of the Hanseatic merchants and the Pomeranians. The ships of the flooded seas still bore the same bronze and red flowers. Contained honey, which oozes freely from the water, is used to collect sandworms and oblasts, which swarm and grow fierce in warm waters.

Rosemary

For ergonomic reasons, the size of the double bed is recommended to be 2 m deep and 1.6 m wide. The stinks can be increased up to 2.4 x 2 m; It is important to develop even more important materials such as vicor and primary technological methods and construction materials.

A standard single bed is 1.9-2 m long and 0.9 m wide. This can accommodate people of extreme size. In case of shortage of space, the width can be changed to the following carriage length – 550 mm. Ale under this ob'vyazkovo there is a bichna fence and a bed for adults.

The height of the surface of the bed (on the top of the mattress) is between 350-500 mm, depending on the height and stature of the head. The upper border will suit those who have a horn that has reached the back of the stitch, and by the way. Fashionable Japanese beds with a height of 220-260 mm are just fashionable. The thickness of the ball of the highest sawed surface in the room is 200-300 mm as a base. Therefore, the child’s and toddler’s bed also swell at an adult height, and those who need to be able to handle it need to have a fit.

The height of the bed is divided as follows: 180-300 mm – mattress, 150-200 mm – drawers, bed – underfloor area. It can go close to 0. In this case, you need to work carefully with the drawers: without ventilation at the bottom, you can easily suffocate, start to develop miasma, and then you will become sticky on the tablet. The minimum height of the space underneath is 80 mm.

Mattress

The left part of the vitrat sits lightly on the mattress. This can cause problems when designing the bed yourself. If you decide that it’s easy to work on your own, then the ease is absolute, and you need to buy a purchased mattress on the road. So we’ll figure out how to place the finished mattress on a sunbed without folding frames, and how to inexpensively make one for yourself that doesn’t compromise on the best orthopedic ones.

In advance: a self-sustaining mattress is absolutely individual, and only for adults over 25 years of age, whose bones have become completely ossified and have stopped growing, and there are differences in their own perceptions and their correct interpretation. A child's bed will be provided with a special factory-made mattress, otherwise they can be taken to an orthopedist with regular expenses. The high price of orthopedic mattresses is explained by the fact that they need to be suitable for people of different heights, sizes and complexions.

Ukladannya

Just place the mattress at the bed - the bed, covered with the flooring of the bed and the sides of the sidewalls of the bed - the drawer, the left hand in Fig. If you choose this method of installation, then, first of all, you need to buy a mattress. The dimensions of branded ducts in one batch can be increased from the standard 2000x1600 mm by plus or minus 10 mm. If you fail, the mattress will either not fit into the bed, or you will lose the wide gap around the perimeter.

Note: A gap around the perimeter of the mattress is still necessary for ease of filling the mattress. Ale is no more than 3-4 mm. This must be folded when expanding the dimensions of the self-made bed.

When turning on the bed with the mattress at the bed, sometimes you end up bumping into the wood of the sides. This is unacceptable, and it may be painful if you fall on the brush or ankle. Therefore, the flooring of the bed is often raised to the level of the top of the drawers (for which it is necessary to move the timber frame upward, div. distance) and the entire bed is made into the width of the mattress, right-handed in Fig. Once the mattress is restored, it is covered with fixing beads made from wood, plywood, plasterboard, and EPS. Glue the fixators until the mattress is soft; to a mattress with a stiff base - attach with screws or nail with nails. Under the fixators in the flooring of the lounger, drill the opening or press the opening.

Samorobny

Preparing a self-made mattress is simple: foam rubber of different brands with mosaic balls, PVA glue – that’s all. You will need three grades of foam rubber: 45 – the thickest and springiest, 35 – medium springiness, 25 – soft. The number of balls is 6. The standard height of the mattress is increased from the standard 180-200 mm, which requires compensating for the curls of the side and bottom. The design of the mattress is clear from the very beginning, and it is also shown on which parts of the body and which internal unit is liable to fall.

Note: The balls and their blocks are not glued together over the entire surface for ventilation. You need to glue it with an envelope; At least 60% of the horizontal areas will be lost. І no more than 80% – for value.

When purchasing, the foam rubber is checked “on the line”: squeeze with your fingers to the edge and release sharply. The straightening of the material is due to the mittevo, behind the fingers. If there is a noticeable depression that gradually disappears, foam rubber is good for nothing but a mattress.

The removal of internal supports from thick foam rubber is determined individually. Experimental use - 4 pillows, covered with a cotton carpet or 2-3 jacquard ones. For a paired mattress, the transverse support is determined by the strength of the better half (it is assumed that the pair is normal and the partner is lower). If there is a significant difference in the size of the head support, it is necessary to widen it. The thick sidewalls of the 4th ball are similar to those of the sleepers.

Double bedroom is simple

Design elements

It's easy to see - a rectangular frame with two backs, corners with legs, and sides - a drawer. In the middle, along with the backs and drawers, there is a single beam frame. The wide leg also has additional elements of stiffness – side members, one-piece ribs. The timber frame is covered with a flooring of planks or plywood (div. Fig.), which creates an even surface - a deck chair - or a sunken tray. There are cracks in the flooring or openings for ventilation. These facts are enough to wake you up easily. Let's get started.

Notes:

Some recommendations for bending a sunbed uphill are archaic. They worked so hard for hours when the sunbeds were covered with mattresses and feather beds, as if they had no spring at all. Whatever the current mattress, it’s either a flat bed or a curved one. Otherwise, the curved fold will be more expensive.

The diameter of the openings on the plywood bed is 30-40 mm. The gaps in the plank are from the width of the board to the width of the board. First - less, but more boards are needed. I marvel at the total weight: up to 140 kg of maximum width; 180 and more are minimal.

About hooks and pins

The most reliable and most important place to lie down is to eat. Therefore, the parts of the bed in the corners are connected in two ways: with dowels in the boards and the quarters of the timber frame. The holes under the pins must be aligned precisely, so they are distinguished during the forward collection process, div.

Back

The design of the backrests is shown in detail. The top can be whatever it is, to suit your taste. The cross beam 50x50 is secured with glue and self-tapping screws. Glue – PVA for backs made of MDF or “Moment” or something else. for laminate. Virizi in the center - under the spar, div. distance, 25 mm deep and 40 mm wide. The distance between the inner edges of the rails is 50 or 40 mm, allowing any scraps to go to the connection of the transverse stiffness of the spar, as well as dividingly.

The back is hard. M'yaka back (so, madly, kudi yak manually) - special, dosit folding design, that . Back thickness – 24-40 mm. The least important thing is to apply it to the laminate/MDF base; more - to self-made typesetting from planed boards. For this type, it is necessary to glue together two panels of 20 mm each, each with boards in an orientation perpendicular to each other. Glue PVA over the entire surface using a notched spatula. Dry the fabric by spreading it over the entire surface using a dryer with a weight of at least 80 kg. Stain the splint several times to the required tone or etching; You can also see the texture of the wood.

The length of the timber depends on the dimensions and the method of laying the mattress. If it fits into the cradle, then A is its width plus 6-10 mm. For a standard double, double bed, 1606-1610 mm. If the mattress is placed on a sunbed, then its width minus the thickness of the side boards and minus another 10 mm. For a standard mattress, the size of the drawer is 1600-(2x40)-10 = 1510 mm.

The width of the backrest B for the corner is no less than the width of the mattress plus the bed side (mattress on the bed) or the width of the mattress plus 10 mm (mattress on the lounger). The width of the backrest is exactly the width of the mattress plus the double thickness of the drawer (mattress in the tray) or the width of the mattress plus 10 mm (mattress on a lounger). The lower one, the width is not large, the grip of the bed is really weakening. Work well either high or on the same level with the sides - on the right hand side.

The design shown will not require any legs. The visor at the bottom is also not binding - on the flat bottom, the bottom ends will become the same. Just forgive the robot and change the laugh under your skin. If you really want them, you need to place them under a lumber frame, on glue or with a couple of flowers without much effort. All attention is paid to the beast’s tender parts. There is a bed that can stand on the beds and books for ten years. This is insanely barbaric, but don’t fall.

Tsargi

The design of the drawer is as simple as a small one: it is a T-like beam made of tens of timber and planks of 20-40 mm. Folding - on glue and self-tapping screws, as already described. Dovzhina timber and boards however; It is easy to describe and does not break the folding openings of the grooves and vises. The pin bosses are indicated intelligently; they should be placed after the first assembly.

For boards, it is not easy to cut out sawing from furniture. The cut is a planed board, thirty or forty, 150-200 mm wide. Prepare it first with stain or mordant, as described. You don’t have to bother in the middle, it will only be easier to lie down and die.

The kings of antique beds are great works of decorative art, while modern furniture is designed according to the principles of minimalism. Low kings do not stand out in any interior, so they do not need lacquering, polishing and waxing, as long as they match the tone.

Note: For ease of operation and economy of footings, the structure is often the same as the drawers. This time it may seem like it’s finished: varnished, laminated; This detail is immediately visible. The same legs are needed from behind, for a stylish design and easier tidying up, div. rice. right-handed How to gain legs is described earlier.

Rotating the timber according to height is possible. For a mattress in a lodgment - an indentation at the top of the timber from the top of the board is 30-50 mm (meaning the mattress is buried in the lodgment) plus 20 mm, for example, plank flooring, or plywood (12-20 mm), for example, plywood. For a mattress on a lounger, the entrance from the top of the board is simply thinner than the flooring, or the cover is 2-3 mm smaller, so that the edges of the mat do not rub against the boards of the drawer.

Spar

The plan view of the base for the bed is shown as a baby. It is possible to remove the mattress fasteners mentally. The slots for the fasteners are already selected in the flooring of the lounger. For reliable fixation you need 4 along the edges or 2 between the sides of the spar. For a mattress on a bed, fasteners are not required.

The spar is a small section of late ligaments in the middle. Ask your double bed to have three side members, skins on one board 40x100 mm. The design is similar to the spar of a wooden flight wing. It’s nice, it’s tough, and it allows you to get by with two of the same kind of dogs.

Inserts of transverse reinforcement between the frames are made from trimmings of boards and beams under the frames. They may be 4-7 after the spar is evenly distributed. At the ends of the rails, quarters up to 25x50 mm are selected under the visors in the cross bars of the frame. The top of the spar and beams of the frame should be made one flat.

The spar is assembled using glue and flowers. The skin insert requires 4 pieces; 2 diagonally from the skin side. Diagonals from different sides are opposite.

Folding bed

Front

According to the prepared elements of the frame of the back (the lower part – also with the legs, as intended) should be placed vertically, propped up with stools or drawers. Then they put the frames on and adjust the straightness of the frame along the diagonals. Wrap the folded one with a winder, check the diagonals and evenness of the frame once again.

Now you need to place a place under the dowel so that you can connect the royal boards with the backs. For this purpose, in the middle, cross the lines from the boards onto the backs, raising the height in front; you need 2 pins per end. The opening from the top and bottom is half the distance between the bosses, then. the width of the board is divided by 4, 1/4 at the top and bottom; between beans – 2/4.

We take out the kings and drill holes into the ends of the boards. We smear the ends of the boards with tarpaulin, which is easily wrinkled around the holes (you can touch it with a felt-tip pen), lightly pink the backs (here you need a pad), put the drawers in place, and firmly squeeze the backs; The straightforwardness here is difficult to verify. Where the holes are needed is now immediately visible. If it was badly done, you can remember and repeat, or for all openings.

Frame

Now we select the holes in the backs and select the base while still on the dowels of the boards/backs, as described above, and from the gluing of the quarters of the beam. Then, we drive the dowels into the end of the boards onto the glue, coat the holes in the backs and quarters of the bars with glue, dry them until they are wet and place the backs on the sides with a mallet until they fit tightly. After this, the frame needs to be covered, not with fabric.

To cover the frame on the sides and in the middle of the sides, we place strips of packing cardboard and tightly wrap the three parts with turns of the winder. Vuzol is obliged to fall in the middle of the width of the corner. Here again, you can’t do without a helper.

Then the turns are evenly distributed across the width of the boards of the frame and in the middle of all four sides, cuttings of pipe or wood of equal diameter are added. They can be in the range of 20-80 mm, depending on how tightly the coil is pulled, but for everyone the same. Carefully, until the glue begins to gelatinize, check the straightness along the diagonals, level it until the frame goes sideways, and dry it, not hot, 2-4 add.

Porada: If you haven’t tightened anything like this before, practice on a dry frame, select round ones, and then use glue.

These sensory operations are illustrated by a diagram in Fig. from a school physics course. A small tension in the transverse straight line according to the parallelogram rule gives a great tightening of the tension on the side of the motor, and the frame sits to the edge, which is necessary for strength and rigidity after residual folding.

Information before you see it: This method of creating a great advantage is well known in military practice for the extraction of equipment that has settled. Place the winch cable of the machine around the tree and catch it with a hook. Then the winch is turned on for winding, and the fighter steadily pulls the cable sideways in the middle. One little skid for 10-15 minutes sails from the swamp or from a small ZIL-131 with a 12-tonne wagon. And without a pull-up on the side, the winch will stop, and the cable will be tight.

After drying the block frame, firmly open it under the pins there and place them on the glue. Then we place the spar behind the seat; We adjust as needed. We coat it with adhesive and mortises along the beams, place it in place and fasten it with steel coils, as shown on the little one. On the skin there was a patch that needed 3 screws.

All these operations are carried out without any difficulty. It is removed 2-3 times after installing the spar. Then we reinforce the spar with steel coils according to the diagram in Fig. Now the base is ready, and not much is left.

Sun lounger

Why be shy about decking a sunbed, it’s already been said. The flooring is fastened to the frame using glue and anchors. Glue it together: the flooring does not only trim the mattress, but plays an important role in the underlying mechanics of the design.

For a plank substructure, add 20 x (80-100) planks. You can be brother and friend, you won’t be weak, only more important. However, it is necessary to pay attention to the construction of the flooring in order to properly lay out the frame beams.

The skin panel requires 8 flowers: 2 at the edges and 2 at the skin intersection with the spar. If the flooring is plywood, then the flowers are driven into the corners (falling on the dowel - no big deal) and into the side of the spar. Then we “bloom” along the perimeter and along the axes of the spar with a edge of 80-120 mm.

Let's wait for a couple more, lay out the mattress, bed sheets - you're ready! You can love him in any obvious way.

With drawers

The diagram of the bed frame with drawers is shown on the baby. There are no fragments of the frame and boards that provide rigidity, strength and durability are ensured by additional beams with a height from the underlay to the flatness of the mattress, then. to the top of the frame beams. Beams are made only by pressing, so the cheapest material is suitable for them: 20 mm chipboard, etc.

At the places of crossings with police and beams, there are visible cross-sections. The police and bars will be left intact, otherwise the structure will be weakened. Insert the beams onto the site, throwing the frame over. Go through the drawers, drip a couple of drops of PVA onto the stick and dry for a year and repeat. Then turn it over (glue is only needed so that the beams do not fall out), turn it over again on the box and seal the bundles behind the diagram.

After this, box fittings are installed: sleds, rollers. Install the flooring - you’re ready.

Notes:

The dimensions of the described beds can be increased to 2.4x2 m without changing the design. Lovers of “midnight” call these kind of spoons Swedish. Possibly, associate with the “Swedish trio”.

The spar of a single bed of this type can be made from a single plank 40 x 100 mm.

They seemed to have sunk, they seemed to be lying - either without under-bed space, with or without drawers. Ale fashion is fashion; It is customary to note that the podium is entirely with stiff decorative frames around the tray, with or without drawers, as in Fig. The great sense is not visible here, only the living space is visible. All fashion is fashion. By rinsing, and framed, you can save and clean the drawers.

The podium chair has been adjusted to the baby. The dimensions of the design indicated by the author are in centimeters. The value and operational capabilities are satisfactory. Wooden planks will no longer fit on it; you need laminate, MDF or plywood. І the accuracy of sawing workpieces is required to be high, plus or minus 0.5 mm. Specifications before selection are in the list below the little one.

A – beam panel 1910x330 mm.
B, C - corner panels, 2 pcs. 1650x330 mm.
D – strip 1932x150 mm.
E – the same, 1710x150 mm.
F – top panels of screens, 2 pcs. 953x320 mm.
G – cross section 1910x100 mm.
H – backrest sides, 2 pcs. 330x100 mm.
I – far walls of drawers, 2 pcs. 778x240 mm.
J – drawer sides, 4 pcs. 760x240 mm.
K – internal panels, 2 pcs. 1910x330 mm.
L – back, 1606x330 mm.
M – central panels, 2 pcs. 1479x272 mm.
N – crossbars to the central block, 2 pcs. 272x42 mm.
O – podium partitions, 8 pcs. 330x81 mm.
P – drawer bottoms, 788x748 mm.

Parts A – H are made from a 22 mm board; I – J from the board 16 mm; K – O is made of 19 mm chipboard, and P – is made of 10 mm plywood. In addition, you will need a beam of 27x27 mm for the transverse and 27x47 mm for the later supports of the mattress; the decking of the sun lounger is not rebuilt. Zagalom - it’s still easy.

Double-tiered

Different types of double-top beds are on sale without any problems, and it’s not surprising: there are more demands, insurance shortages of living space and the need for rich people to have a friend’s baby, which is supported by companions. A two-tiered easy one, shown for a small right-handed child, is distinguished from others by the fact that it can be developed independently with a minimum of costs and effort.

Note: guess about self-propelled mattresses! More precisely, forget it. Experimenting with a hand that has not yet formed will threaten the child’s musculoskeletal apparatus with defects!

The strength of this bed is in the design of the heel stands, the weakest point of all double-tier beds. In this case, the skin is made from two boards without cutting or external fastening. Rigidity and support of the timber frames are ensured by cutting the baseboard with glue and self-tapping screws; The stick of the boards is also glued. The bottom of the upper frames, so as not to calluse the eyes and the heads of the self-tapping screws, are sewn with thin fiberboard with decorative coatings on glue and small nails.

The width of the bed for the baby is shown as the minimum allowable; It can be increased to 710 mm. It is not possible to work any more; the principle of collection does not allow one to eliminate the need. Dovzhina is the maximum permissible; Friends, when they are adults, do not catch anthrochs because they have to sleep on a rookery that is too great for them.

Gorishche

Another requirement is the light-sleeping virib - the light-sleeping virib. Call on her to influence us, diva. rice. The purchase should be completed with a folding (and expensive) structure with metal elements of value. Alternatively, a pallet for a mattress, which does not compromise its value, can be made from the same timber and 20 mm plywood, div. rice. right-handed Please pay attention to the order of the cutting of the beams at the ends, which will need to be adjusted.

The plywood sheathing on the bottom is solid. Scraps of the size of a standard plywood sheet are not sufficient for a panel, the skin board is collected in two parts using glue and glue using additional braids from the same plywood with a width of 60-80 mm and a length of the internal size. Frame arms. Place the braids in the middle; The shields are attached to the frame with glued screws, as described above, with a edge of 60-80 mm.

When installed in a niche, the pallet is mounted on a straight-cut frame made from a steel cut of 80-100 mm. Go to the edge to create steel and vikoristovovat as an additional support: welded to the frame and with “heels” on the underside. The suspension for two parts needs to be supported: a bracket, as in the figure, dipping from a triangular corner along the corners, through bolts 12-16 mm with washers 60-80 mm in diameter under the heads.

Fastening posts to the frame - made of steel pipe no less than 30 mm with welded flanges. Fastening the skin stand to the frame - at least at 3 points, evenly distributed along the stake or the perimeter of the flange, with 10-12 mm bolts on steel anchor collets. In such a situation, if one bolt is loose, the others will move ahead and will still be damaged, and the spit will immediately indicate that repairs are necessary. When attached to one point or splint in a line, rapt deboning is not included.

Notes:

Don’t bother with hooks for chandeliers, even if they stink according to the specifications and tons of trimali. The chandelier did not return to its place yesterday and did not go down. And she doesn’t turn around and doesn’t rush in her sleep.

And most importantly - first of all, take hold of the easy mountain, reconfigure so that the walls and the ceiling are visible!

Vidkidna

It is even more important for adults to live with cramped minds. The sale has mechanisms for collecting money (div. rice), which allows you to earn it yourself. The legs (lower on the left position, small and right hand on the central one) are thrown up under the action of the moisture vapor. The mattress, naturally, is made from a firm base.

The supports are specified in the specifications for the mechanism, but they are low and can be easily installed in areas with high walls and floors. The principle of operation of the mechanism is such that it circulates in the middle and little is transmitted to the external surfaces.

When selecting a mechanism, it is necessary to pay attention to dampers, gas lifts or springs. The first ones work smoothly, as if a woman with a mattress is present at the singing boundaries. If it becomes more obvious, the frame will be difficult to come out of the frame, and will smack and rattle, and there will be no adjustment. Spring dampers are more expensive, but are adjustable to fit your position.

For sale and ready with a mattress, div. evil. This is impossible to do without attaching it to the cover, but it’s less than 10,000 rubles. you can't buy a good one.

To install the above-mentioned folding legs, you need a wardrobe: the legs are out of sight, but you can’t grab them, or even fall out. There are still wider flaps, marvelous. rice. on the right, so as not to piss off the interior with a raised look. However, due to the great emphasis on the mechanism, this design is not for self-propulsion. From the impersonality of furniture companies, there is a decent bed to soar and work alone.

The massif is a true crown of mysticism. These furniture items are focused on: naturalness, durability, aesthetics.

The smell is not only comfortable and enjoyable, but also guarantees a good and healthy sleep. Of course, a bed made from natural wood is expensive and does not stink to the skin.

If you have some experience in carpentry, you work with power and manual tools, and you have time to spare, then you can make such a piece of furniture by self-propelling.

The natural massif is transformed into an elite and noble material. You can easily harvest wood from different varieties with your own hands:

Porada: on any type of village, select the choice for a self-prepared bed - you will decide where to choose from financial possibilities, especially similar to the characteristics of the bedroom.

Double bed chair

To easily make self-tears from a tree, you need to:

think over the design;
depends on the dimensions and design;
select stained materials;
unpack a lot of details.

In order to avoid damage during the process of preparing and folding a piece of furniture, as well as for proper cleaning of expendable materials, it is necessary to create a chair frame. On the new product, with an accuracy of up to a millimeter, indicate the dimensions of all surrounding parts, the place of fastening of the elements, and the materials of manufacture.

You can create armchairs yourself, from a specialized furniture company, or with the help of special computer programs.

Porada: If you doubt the powers that be, it is better to quickly seek the services of professionals. Otherwise, you can move the road to the tree, and the preparation will turn into a difficult work stage.

Tools and materials

After preparing the chair, purchasing materials and other preparatory work, it is necessary to prepare tools. During the preparation and collection process you will need the following elements:

Z materials prepare:

screws, screws;
plastic plugs;
varnish materials;
wood putty;
Eurobolts.

Prepared and folded

Now you can safely proceed to preparing the remaining ingredients and then collecting them further. The robot's progress will look like this:

Finishing wood trimming

After preparing all the parts and folding the machine, it is necessary to clean them using a sanding machine. If there is no such thing under your hand, you can quickly sand it with an emery paper of different grain sizes.

After that, the whole saw is removed from the hole with a brush.

Here's to the day, let's go You can cover any kind of stain with stain. After drying, the vibrator is coated with varnish on both sides.

Photo

The spoon from the massif is truly a miracle. Just have mercy:

Korisne video

The preparation process can be watched in the following video:

Visnovok

Finally, it is possible to understand that by working with wood, when there is extra time and necessary tools, it is possible to create a stylish, practical, and, most importantly, easier operation of a light self-propelled machine - it can be done simply in operational terms. without special financial expenses.

In contact with

At the end of the gardening season, you want to spend more than an hour in the fresh air of your favorite beds, strawberries and rivers. But you have to spend an hour turning back to the apartment under the house of Mishka, because there is no manual labor in the garden hut. spoon And your living room, without a bedroom or bed, stands next to the living room table. Don't fall into trouble!

Everything should be kept aside because you want to vikorize him. For your child of the middle age, make a single bed spoon . Since you are of great stature, a comfortable sleep will only come again.

Are you friends? This means that solid wood is needed for a double bedroom.

If there is enough space, keep it lightly under the podium, and place the animal in a quiet area next to the coffee table, where you can go. In a small room with expensive leather per square meter, wake up easy on the podium.

Use tricks to save your bed, and other things.

For a stylish whiteness, place a tall narrow box with a top lid near the corner. It is important for someone to take care of the pillows and rugs during the day, and the cape at night.Take a beautiful decorative back and nail it to the wall above the corners. Place lamps on it.

This will add aristocratic chic and tranquility to your bed.

Select material and get price

The metal is too expensive, it requires a specially equipped mine, a welding machine, it takes up a lot of fuel and does not retain heat well. Good furniture can be purchased at home from a wide variety of lumber available without having to pay extra for a well-known brand.

Making a wooden spoon with your own hands will be cheaper than buying a ready-made one in a store.

How to make wood from wood with your own hands

Best suited for spoon medium wood (550 to 760 kg/m³) and high density wood – over 760 kg/m³. It wears out less, but it is more important to be processed.

Pine is optimal for its value and ease of processing.

IMPORTANT! Yalina is not suitable for load-bearing elements and nizhok lizhka . Vaughn quickly collapses into vantage.

For non-knotted frames, select boards or timber made from slab wood – modrin, birch. The legs can be made from bars, and the slats under the mattress can be made from cheap pine boards 2 cm thick. For decorative finishing, thin ones can be used. boards z yalini 0.5 cm. Carefully check the material for the presence of knots, unevenness and shortness.

The fewer such defects there are, the easier it is to sand them with a sanding machine.

Check the curvature of the workpieces in a simple and effective way.

Lift them by one of the ends at eye level.
The ribs that run from the nearest to the far end may, from perspective, appear to be a straight line - their curvature will be noticeable immediately.

UVAGA! Obov'yazkovo to create a chair. Adjust the size of the mattress. The stench may not be consistent with our search below. Internal space frame spoon May be a little more. An allowance of 30 mm is allowed at the boundaries.

The height of the legs is immediately apparent.

Lizhko Solid wood can be made without them by gluing material pads under the tufts to protect the underlay from rags. For light single and double beds, the optimal height will be 35-40 cm - you can suck and wash the bed or use a hanging drawer to save clothes and clothing.

GOOD! Try to get together with a piece of furniture where possible.

Making things from wood with your own hands may not be the simplest solutions, but the most promising ones.

Light cob raven

Create an awkward single bed for a mattress measuring 80x190 or 90x200 cm easy with your own hands from wood . There you go, an adult or a teenager. For preparation you will need:

B rus for several legs with 50x50mm girder;
D frame 25x245 mm for side sides and rear backrests, 25x100 mm – for the production of crooked slats, 25x200 mm- for the corner wall;
B russian girder 50x25mm for the preparation of support beams under the cross-cut slats;

Materials for making a bed.

Add to the edge of the burnt lumber:

Furniture bundles and ties.
Before Self-tapping screws 60 mm;
Sh canti widows 80 and cross-cut diameter 8 mm;
Z wood glue;
M orilka or seepage for wood;
A Krylov water varnish.

Materials required for work.

While choosing prices and other options spoon Vikorist tools:

D rail and screwdriver;
N great hand plane;
R a circular saw or a furniture saw;
Sh sanding machine or sanding bench;
N splint of clamps;
Before jerela for applying glue, varnish and stain;
R ozsuvny carpentry kosinets;
Z triple rhubarb;
M alka - a device for smoothly marking cutlets that are cut off;
Z Tuslo – a tool for fast and precise sawing of workpieces at 45 and 90°;
І Vimiruevalny roulette.

Tools that you will need in a robot.

Take the corners first. From the beam with a 50x50 mm crossbar, you see two legs up to 80 cm high. Drill 4-6 openings with a diameter of 8 mm and a depth of 30 mm at the top part from the inner sides. From 25x200 mm boards, you saw two blanks 950 mm wide. At the ends, make openings with clay up to 50 mm, which is similar to what you made on the legs.

Cover the parts with wood glue at the joints and fasten them with dowels, carefully hammering them in with a mallet.

The scabbards are prepared for boards 25x240x950 mm and two split beams with a height of 400 mm.

They squeak just like that.

The backrests are fastened from the walls 25x250x1900 mm with furniture rolls or ties aligned along the outer edge Nizhok.

SEE YOU HOME! Ties make it easy to move furniture when moving.

At the bottom edges of the right and left walls, using wood glue and clamps, install support beams 25x50 mm and dovzhina 190-200 cm. After hanging, before removing the clamps, additionally tighten the beams with screws.

Folding barrel wall of the bed.

3 boards 25x100 mm prepare 12-14 cross slats dovzhina 95 cm. From the left and right ends, drill using cutting holes with a diameter of 3 mm at a distance of 12 mm from the edge. Place them against the support beams at a distance of 35-50 mm and tighten the screws.

The bag has a folded bed.

IMPORTANT! All parts must be sanded before assembly. Use a casual braid to check the “straightness” of the cuts between the side walls and backs spoon . Be sure to carefully control the horizontal placement of frame structural elements.

Sand the surface with a sanding machine. You can chamfer the outer ribs of the backs and other parts to prevent chips in the wood and improve the overall appearance. To increase the term of service, please purchase stain the wood and dry it. Cover with acrylic varnish.

As a matter of fact, making wooden single bedrooms is not easy at all.

SEE YOU HOME! Shob the end nizhok when re-sudding, do not fray the underlay; you can glue felt linings to them.

Lizhko-lorry

There is a difference in the design of the backrests, and they are all reinforced with a jumper on the bottom, which prevents the sagging of the mattress.

Work under a mattress measuring 140x200 cm.

The head of the repeat is folded between one wall and two nizhok . Make a wall using 2-3 planks dovzhina 1400 mm and thickness 25 mm, reaching the required height (30-40 cm). The legs are made from timber 50x50x800 mm. Fastening of wall elements nizhok prepared with 8x80 mm dowels, wood glue and reinforced with 65 mm long screws.

Nizhzha is elected in the same manner.

Bichni sides of the bed -The one-and-a-half-pieces are placed on the same level with the lower boards of the backrests and at the same height.For variety, change the design of the backs spoon . The middle board of the wall can be replaced with short vertical inserts from the same boards themselves, fastened with tongues.

You can cut the cutlets along the outer edge of the upper board.

For which you need the help of a special tool - a crayons - to cut the markings with a sheep. The fry folds up from the handles so that it presses against the edge boards , A thin metal plate holds a final cut and a fastening bolt, which allows you to fix the plate, specifying the required cut and finish of the cut. Using this method, you can smoothly place symmetrical cutting lines on the left and right ends. To ensure that the hacksaw does not go out of line, press down the markings with clamps on a wooden block.

To give it a nice look, before varnishing, you can apply stain to the surface of the legs and backs.

How to make a double bedroom from wood

Two mature people - this is a serious problem, What matters more than the soil approach in the choice of material and method of collection. Prepare a bed made of solid wood for your bedroom.

The basis is a standard double mattress measuring 200 by 160 cm.

You will need the following materials:

Used block 50x50 mm for legs and frames, 3x3 cm - for support beams under mattress slats;
Doshki 20x100 mm for the cross support under the mattress;
M metal furniture roll with a width of 50 mm;
With adobes of 40 and 65 mm.

The tools you need are an electric jigsaw, equipped with a file with large and widely spaced teeth.

Now we assemble the frame for spoon with internal dimensions of 210x170 cm and a height of no less than 15-20 cm. For this, three or more strips of timber are glued together, tightened with clamps. After drying, we cut it in such a way as to cut off two blanks for the sides dovzhina 220 cm each and two for backs – 180 cm each.

Using the same method, we select a late jumper with a height of 10 cm and a depth of 210 cm.

Before assembly, tighten the connection to the “lock” type. For this purpose, on short workpieces, use a jigsaw to cut a notch, making cuts in the middle dovzhina 5 cm. On long blanks of barrel walls spoon , Fill the “thorn” by cutting 5 cm from the bottom of the animal.

Apply glue to the grooves and spikes and connect them under a straight cut, turning them over with a regular “cut wrap”.

Attach the later jumper with an additional support in the middle behind an additional metal roll with a width of 50 mm, aligned along the bottom edge of the frame. Attach the legs from timber with a height of up to 40 cm. Attach the fastenings using suitable glue and screws.

For added value, secure the connections with clamps.

For greater reliability, prepare the legs spoon from a thick block. To give it a sophisticated look, chamfer the inner side at 45° using a miter box. Don’t overdo it - the support area is sufficient to accommodate the large space. When installing, carefully screw long bolts with heads into a countersunk washer and carpenter's glue.

At the lower part of the skin, loosen the tributary inserts, which will serve to prevent deformation of the structure.

Glue beams made of timber 3x3x210 cm to the long side walls.

Its upper face must be located in the same plane as the upper face of the bridge.

3 boards 20x100 mm, cut slats dovzhina 170 cm. They are laid and secured across the lintel and later support beams at intervals of 3 cm.

The first and remaining slats must contact the front and rear walls of the frame, the others are evenly distributed between them.

IMPORTANT! To avoid ripping the slats, make them 1 cm shorter than the inner width of the frame.

After completing the folding, carefully polish the surface with a sanding machine or by drilling with a special attachment from a hardened medium fine-grained emery paper.Cover with stain, and after drying - with water-based acrylic varnish on a bunch of balls.

For a double bed you can make wall corners from 2-3 boards dovzhina 25x100x1800 mm and 10-12 boards 25x100x450 mm. The first one next to you, who is in contact with your back, will go short boards . On a fancy boat it is necessary to have a fastening. At the appropriate places of the corners, screw the metal plates with screws, the lower edge of which is inserted when hung into the grooves of the tires.

The best solution is to secure the rails for hanging wardrobes with dowels on the wall - behind a number of short boards.

Since it is not appropriate for a corner to be harsh, remove it with padding from the stepping balls:

D SP chi plywood 1 cm;
Foam rubber 3 cm;
In atin;
About bean cloth with a printed baby;

Use a piece of plywood or chipboard to cut a base of 45x180 cm.

Bevel the ribs and carefully sand them so as not to tear the upholstery and batting.

Use expanded polystyrene or foam rubber to create a workpiece that maintains the dimensions and shape. Apply them to the chipboard and create a series of symmetrical openings for decorative lips. Measure and open the batting and upholstered fabric behind the shape of the workpiece with an allowance equal to the total amount of dry workpieces, multiplied by two.

Make sure that the doors move symmetrically.

Using additional glue or a special spray, glue the foam rubber to the base. Carefully spread the batting on the underside. Place the chipboard piece on top.

Fold in the seamed edges, starting from the bottom, and use a furniture stapler to nail them down to the chipboard.

Repeat the operation with upholstery. To ensure that the fabric does not wrinkle, sand it with sand and tighten it well with vicor clamps, screwed to the middle of the workpiece.

IMPORTANT! Be careful with the staples of the stapler. Still, no one can be bothered.

When finished, “sew on” the sofas. From the twisted side of the corner, pierce the upholstery with a large “choice” needle and stretch out a thick thread, thread it through the ear of the mouth and bring it back through the same opening.

Secure the ends of the thread with a stapler on the back turn.

To hang the broken corners on the wall, use tires for hanging cabinets.

Wood made with your own hands, cut for a special project, will cost less than purchased.

Remember, the lack of pennies and the shortage of living space does not prevent a woman from sleeping comfortably.

VIDEO: Do-it-yourself double bedroom made of wood.

A light double bedroom with a lift and two separate rooms for speeches (1400x2000)

There is a light double bedroom with a lift and two separate rooms for speeches (1400x2000) by ourselves.

It has come to the realization that I no longer have the strength to sleep on the sofa, just to unfold it. The sofa is old (8 years old!), washed in places, the back feels uneven and the back hurts.

For starters, we decided to go with our friends - marvel at the shops and fairs of the bed + orthopedic mattress. The size of the sleeping area was determined to be 1400 x 2000. This is suitable for further planning of the room.

The bedroom set (bedroom, wardrobe, bedside tables, etc.) is not suitable, because The bedroom is small - 9m2. It’s just easy to become deprived.

Prices varied - up to 6500 rubles. (chipboard + plywood) up to 50,000 more.

It happened something similar:

only without corners. ( Soft sides without hot cuts+ simplicity... in short it was worthy!)

The price of such a bed (without lifting mechanism) is approximately 15,000 rubles. You can put the elevator in Lizhko (more + 12000). Together - 27,000 rubles.

This lifting mechanism is required because... The apartment is small in size and the availability of additional supplies for various speeches means nutrition is top priority.

It’s easy to work on your own (to be sure of nothing, but to work with the tool).

They found an orthopedic base for 4,500 rubles.

Transformation system - elevator: 1200 rub.

Having sketched out a sketch, thought it through - how everything will be covered. Having roughly dug through the lumber and gone in search of boards for the sides and bottom. ( Important: There are no solid boards of the required size. It is necessary to bathe the tongue and groove board (podvikonnya or something similar). I don’t know why, having bought a board with veneer and gluing (thickness - 35 mm, width - 150 mm) with a razkhunka of three boards per side. For the legs, take a beam 100 x 100 mm. All the boards and timber were cut to size.

The booths are made with glue and glue (carpentry glue based on PVA), three planks each: Long side – 2010 mm, short side – 1420+35+35=1490 mm. (Having estimated in advance what kind of gap the gas lift operates at - about 10 mm from the lifting bar to the wall of the bed, to which the gas lift is attached. The distance is 1420 mm). 35mm is a long shot.

The downside of the pedestal is that it has a slight curvature - a “propeller” (take the pedestal - it’s straight). So, having chosen and prepared for a long time, how to get up.

The result was selecting and gluing 4 boards. Size of boards: L1 = L2 = 2010mm, L3 = L4 = 1490mm.

Because The orthopedic base is folded into 4 layers and a later layer in the middle, glued together another board to serve as a support for the base. L5 = 2010mm

Leg size: L1 = L2 = L3 = L4 = 450mm. The timber was gray and therefore slightly cracked until it dried. But the process was not affected by any bitterness. It is important to let the tree dry out. If you don’t hurry, it will be time for your legs to dry out.

The sides of the deck needed to be rounded. There were two steps: 1 - with an electric jigsaw at 45°; 2 - with a stitch grinder (on the eye).

Then all sides of the bed were assembled using the help of small pieces and screws. The foldability lay in the fact that three of the boards came out slightly straight, and one of the sides (which was supposed to be placed with this side facing the wall) was a “prepeller”. The “straight” sides were attached to this head:

Viishovshi on the 4th corner, we have the following curvature:

The board with zusilly collapsed in size and creaked with a long self-tapping screw at the end of the board:

At the bottom of this corner, not everything is right:

Through those from the bottom of the board through the “propeller” the ubik led - a wedge was placed. From the outside side, the board that protrudes is simply cut. The cutlets are rounded using the same technology: (you can see the openings for attaching the legs)

Since the corners in the middle of the base of the bed contain metal coils, there was a need for additional processing of the legs (grooves with a stitch grinder):

The openings of the legs were drilled and drilled. The height of the legs is the same as the width of the sides. Displacement of the legs by 60mm.

Trial installation of the bottom:

All screws are in their places: (At the top there is a place for the orthopedic base + a side for the stability of the mattress)

At the end of the bottom (burnt at the bottom) linoleum strips were glued. At the bottom, don’t let the fabric get loose, but rather the material for the orthopedic base:

After gluing the overlays, gluing and burning the legs with upholstery material, securing the edges with a stapler. Virizan open under the screws of the fastening:

Putting it lightly and estimating how the orthopedic base will become:

This is approximately how you get on the elevators. There are still no support boards under the middle of the base. It moves downwards like the legs - by 60 mm.

We proceed to tighten the sides of the bed. Initially foam rubber S-10mm:

This is the lower side of the board. Foam rubber should be near the edge of the board, because in the middle of the base there will be slats to support the plywood base of the drawers. The foam rubber is glued to the sides.

This is one of the Kuts. The foam rubber is rotated, cut and nailed with a stapler.

The foam rubber is nailed at the top with an overlap of approximately 3-4 mm.

By tapping the foam rubber, the insert was placed behind the seat and on the eye (it will not be noticeable):

Next comes the upholstery with leatherette. No glue, just smoothed by hand. The skin substitute was bathed yak. The dotik is soft and, as stated, completely wear-resistant.

So the side of the legs became ragged. View from below: (This is the same leg, it has a crooked jacket. This is the thickening and the wooden insert).

At the bottom, the skirts were lined with a slouch, without a turn-up. The width of the overlap is the same as the width of the slats, as the bottom is trimmed with plywood. At the top - matching the courtyards for beauty. Kuti hasn’t figured out how to start one yet...

The cut is twisted and secured. There would be a skin, perhaps stretched beautifully with fine folds.

This is what the call looks like:

Curl your hair. It came out soft and rounded. At this stage, glue the linoleum onto the support board.

The ugly little mounds of the middle thigh are covered with excess leatherette:

I check the tight fit of all four legs and support boards to the orthopedic base. ( Note: It is important to train the middle child in one go. Do not rush to screw all the screws into bundles, tighten 2-4 at a time and turn the base over).

The next stage is slats for the plywood bottom. Along the entire internal perimeter, screw the slats with a 25x40 girder. The frame has an opening for large size screws to be drilled.

Sin Andriy adds. Place the screws in a mile, place them against the rail and use a hammer so that the screw is pushed into place. And I'll just spin it:

Mayzhe is ready...

The entire perimeter is in the middle of the edges with a lath.

Having stepped onto the eye, installing gas-lifts on the base:

The bolt closest to the edge is located between the 1st and 2nd lamellas of the base ( Note: Tse, because when opened, the base rested against the legs and did not rise).

This is not a working option:

It was possible to destroy the yakmog close to the bottom of the gas lifts themselves. Corrections, working version.

Gas shock absorbers are installed.

Then I added S=6mm plywood on one side, sanded. I went after the place and placed the animal on the slats. I fill the boxes frequently. Mіstsya – carriage.

The fragments of the roller, which is on top of the surface, overlaps the orthopedic base, then in the lowered position the base rubs and does not burn out.

Gas shock absorbers are selected in combination with the orthopedic base + mattress. My gas shock absorbers are rated at 80 kg.

They collected the mattress and brought it back. On top there is a fleece cover:

The mattress is lying high and you can see the gap between the mattress and the base.

VISNOVOK: It is necessary to destroy the legs and the middle support board not by 60 mm, but by 90 mm. This will give you the opportunity to lay the mattress thicker on the base.

Easy to lift. Dotrimuvati is not required - everything is balanced. He climbs up the mountain on his own.

At the raised position, the mattress crumbles a little under its weight downwards.

The mattress can be inserted by installing a border to the orthopedic base:

That's it. Just ready. Oriented weight of materials (without mattress): 9 – 10 thousand. rub. They took an expensive mattress due to back problems.

The variety of furniture in stores is steadily increasing and it’s often not easy to get a supply. And if you can’t buy it, you can earn it. Due to the availability of current materials and tools, you can make simple and inexpensive furniture from wood with your own hands. Who knows, but after self-destruction, you will want to earn more, and then you can turn into a profitable business from the production of exclusive furniture by hand and robots. I wonder how to easily make from a tree what is needed and what can come out of it.

What do you need to know?

A spoon made from wood with your own hands is most often prepared through the impossibility of using standard solutions. It turns out that there is a mattress, but a standard bed is not suitable for furniture. Then they begin to look at the chairs on the Internet, look for diagrams, and select materials.

Single or double bedrooms are available in a wide size range. If you work on furniture independently, you must choose a design that exactly suits your needs. But first of all, we need to define the parameters.

To determine the width, you need to lie on your back, clasp your fingers and spread your arms at your sides. Then measure the edges of the lashes and add another 10-15 cm from the skin side - this will serve as a comfort zone.

Dovzhina is the growth of the greatest people. Before growth, you need to add 30-40 div. Due to the height, today low models are in fashion - the height should be no more than 50 cm.

It is necessary to wrap the bed - for a single bed, you need to cover it for two persons, for two people, you need to cover it for two separate persons. You need to add another 15% to the mass. You will need to help determine what materials to use for making a wooden spoon with your own hands.

Features of the selection of materials

For the frame of the frame, choose a wooden beam - any other option is not suitable. You can also harden metal, but you will need to have a welding machine and be skilled at working with it. Wood is also much simpler in terms of production technology, and wood is easier to trim. And wood is much more effective in appearance than metal - look at the image of a bed made of solid wood (photo below).

Backs and sides are simpler and more affordable to make from chipboard or MDF. For folding, glue is often used - when working with MDF, the primary glue used is PVA or "Joiner" glue - rather than the same PVA for the authorities.

Preparing structural parts from MDF with your own hands will cost much more. From this material it is important to create a ribbed back.

The bottom for the bed is better than the one on the lath - it’s much nicer than the plywood. You can prepare the slats yourself. If it is necessary for the bed to have little orthopedic power, it is recommended to use the finished slats. These parts are glued together from wood into a bunch of balls, and their shape is slightly rounded.

Fastening parts

If you want to make wood easily with your own hands, you will otherwise have to grind different parts together. Depending on the type of construction, different fastenings may be required. Most often, phosphated screws are used. The stinks appear with a more rusty surface, which means they will be spitting with glue more quickly. The diameter of such a screw is 5-6 mm. Dozhzhin is selected based on the total number of parts to be joined, at which point the numbers add 10 mm.

You may also need some pieces of metal. It is important that these parts are small and have a wide, rounded rib of rigidity. On the surface and edges of the bundles, there are no doubt that there will be dents, splashes, ripples - all these are signs that the metal has been overstretched.

To remove the most reliable fastening, it is necessary to tighten the clamp - this will help ensure the strength of the connection of the two parts. Among the advantages of the process of making a bed from solid wood with your own hands in the home mind is the variety of boundaries in terms, which makes it possible to twist glue and screws together with a clamp, thereby ensuring high quality There is a connection. The fortification, formed by such rank, is more reliable.

Double bedroom

Either self-made or factory-made - a frame that folds into two backrests, a corner and a rear backrest. The scheme transfers the side panels - the drawers. The middle is easily folded with timber frames - it is one solid piece with backs and drawers.

The double model is also additionally equipped with later elements of increased rigidity – called side members. The frame is then covered with flooring - you can use plywood or boards. There are cracks in the flooring to ventilate the mattress.

Otje. How to make wood easily with your own hands? If you follow technology, you can create a more comfortable bed in your home.

Nageli ta kuti

Among the particularly distinctive parts of the fastening of the structure, metal coils can be seen. With their help you can creak the beams. Connect elements in these places and use additional pins. These are the tree flowers. At the stand with dowels It is necessary that the holes under them are completely aligned.

Back

The back can be whatever it is. The upper part is just right for the idea and relish. The transverse part is a beam measuring 50×50, secured with additional glue and screws. For MDF use PVA, and for laminated chipboard "Moment". At the center, create visors under the side members - measure the visor depth - 25 mm, width - 40 mm. Stand between the visors 50 or 40 mm.

The wood (back) ranges in thickness from 24 mm to 40 mm. If you choose MDF or laminate, choose less, if the back will be self-contained with a set of planed boards, or more.

If you look at the baby below, then the bottom of the beam (A) should be based on the dimensions and method of laying the mattress. If there will be positions at the lodge, then the bottom of the beam will need to be made wider than the bottom mattress by 6-10 mm. If the mattress is placed on a lounger, then the width of the beam is the width of the mattress minus two sides of the drawer and minus 10 mm.

The actual width of the backrest (B) must be no less than the width of the mattress, plus up to which the additional thickness of the drawer is added. Another option is the width of the mattress with additional pads is 10 cm. If the footrest is wider, it will significantly improve the grip of the furniture. As a decorative finishing of the backrest, it will need to be cut.

Tsargi

The tsarga is a T-like beam made of five-tenths of timber and wooden planks 40 or less than a few mm. The folding is assembled using additional glue and self-tapping screws. Before long, both the timber and the plank will continue to languish. You can make a king board with your own hands; a board with a width of 150-200 mm is ideal. Later, they should be treated with stains and varnishes.

To save money, you can use the tsar principle. Whose legs are so bad that it would be better to kill him. They would be more noticeable immediately. The gentle bed is important both for the elegant design and for ease of tidying up.

Folding

If you look at the photo with your own hands, the stench does not differ from the store-bought ones and is even better. If there is a lot to lie in the core of the folded structure, it is necessary not only to create a structure, but to achieve an ideal. Here are the instructions on how to do it yourself:

1. Using your hands, push the wood from the tree with the legs. The backrests are installed vertically and supported by drawers or other devices. The kings are superimposed and it is necessary to accurately align the diagonals, and check the alignment of the cuts.

2. Mark the dots under the pins so that the kings are connected to the backs. Then the kings are removed and holes are drilled in them. The structure is assembled, select the holes on the backs and proceed until the base is completely folded - the pins are pushed into the grooves, the joint is coated with glue. To ensure reliability, the connection can be easily wrapped with a thick cotton wool. It’s best to place cardboard under the blanket.

3. Then the coils of the coil are cut out across the width of the board and in the middle, on all sides, insert pieces of wood or pipes. It’s important to ensure the best tension on the motor and the quickest gluing of all connections. In this case, a bed made of solid wood with your own hands can stand from 2 to 4 inches.

4. Then let go of the excuse. It’s better to secure it either with glue or with flowers. You need two flowers per edge. If you have a rack bottom, it is necessary to distribute special trims along the frame.

On video: Made from wood.

Visnovok

Now you know how to make money easily with your own hands. In fact, to tell you the least, the process of working with wood does not take much time. You can see how the wooden frames look with your own hands; you can find photos both on the Internet and in specialized magazines. The stench is simple and elegant. This is a good way to unlock your full potential. Furniture made with your own hands is washed in hot water, and on this basis you can build a successful business. The quality of such furniture, as bright as it is, is great.