Water-bearing ball: how to know water in a folk way. How to find water for a well with your own hands: the most effective ways to search for water in the field At what depth is water under the ground

Water can be found for the classic spring, the sandy spring, the Abyssinian spring or the artesian spring. For the skin method, we need to obtain the necessary water reserves that lie in the clay. The deeper the water lies, the easier it is to understand the meaning behind indirect signs. Apparently, it is easiest to find water for shallow holes.

If you are planning to drill an artesian bore, then indirect signs on the surface are unlikely to help, since the water in the basin lies at a depth of 50 meters.

Having decided on the type of rock, it is necessary to know all the necessary cartographic material for the plot of land. The maps are large-scale, so the more detail, the better. If you please, you can find a map of underground waters. If you accept such cards, they will appear.

If you are just starting to master a plot where no one has been before you, then get a map of the tree growth, so that you can recognize what kind of tree species there are, if they were formed before everything was cut down and dug up.

We know the water by its relief

The easiest way is to pump water into the garden with your own hands, as if your cabin is located on the plain, at the bottom, or along the bed of a small river. It’s easier to know the underground waters on the land, to be sure, it’s not cool. It is even harder to search for water where the earth retains the memory of tectonic processes and volcanic activity - there the geological layers are varied, and it will be difficult to catch a pattern in the polluted water.

Of course, you need some water, but also need to collect the reserves of nutritious water that are stored at a depth of 8-10 m and lower. Water that lies at a depth of 30 m or deeper is the most valuable.

Irregularities in the relief can be identified on the map, where there is an isohypsy (a sinuous line that connects points with a certain height above the sea level). It is necessary to identify the lowest places on the map, and then find them on the locality. These will be your points in the distance. Afterwards, check for other indicators.

We know the water from the roslyns

The method of identifying indicator plants is based on the search for groundwater. The skin is adapted to the specific minds of the middle, so there is only growth there, where there is potential. The trees have the following indicator signs:

Height and root system

The larger the plant, the more water it will require. Well, tall trees are an indicator of the presence of underground water. Roslins, which swell the root of the stem, penetrate far into the ground, sometimes far beyond the surface of the ground. There are a lot of great growths with stem roots on one area - this is the essence of the sign.

For everything here you need to pump water at a depth of about 10 meters.

The concept of “great growth” is clear at times. Of course, tall trees with taproots always have to talk about the presence of water. However, I’ll leave the trail on the tall grass. If the leaves there are large and wide, this is a good sign.

Species affiliation

All plants are divided according to their relationship to the category. For our purposes, we need only two - dry-resistant and water-loving.

In trees, the size of the leaf blade is a sign of their ability to reach the level of moisture - the larger the leaf, the more water is required. However, not everything is so simple - trees that live on replanted soils have thin leaves. This is necessary in order to steam the water as soon as possible in the drains, if the water is completely cold.

Let's use the butt to paint the willows, which grow in the water, but leaves writhe in the sky.

Roslinny grouping

If you water a bunch of willow and willow trees in the field, this means that ground water comes close to the surface. A good signal is the presence of large poplars (they need a lot of water), various types of maples, and elms.

And the axis of birch and oak trees as indicators of water are not even stagnant.

On the right, stinks can grow in the soil, which accumulates, and dead organic matter appears to fall off, and they can take water from the soil horizons. Oak feels good in dry minds, and may even grow in swamps.

It’s better to kill the respect for the harvested trees and grass. For example, the verboses that are overgrown in the lower tier of the sedge tell of nearby water. A good sign is that there is a lot of grass with a lot of leaves on the bottom.

We know the water behind the camp

Close amounts of water can be detected due to the moisture content of the soil in this or other part of the plot. It is easiest to work where the soil is preserved - then the indicators will be more reliable:

• Create a bunch of holesabout a meter deep. It’s not the fault of bottles with a large diameter, but it takes a small amount.
• Take a piece of soil to your hands and squeeze it in your fist.
• If it disintegrates, then the moisture content is low, if it takes shape, then the moisture content is high, and if water comes out when squeezed, this is a good sign for someone who is looking for water.

You can use silica gel, which has a high tendency to absorb water.

It needs to be thoroughly dried, poured into a clay pot and preserved. Then sunbathe the cloth and bury it. Through the doba, the miner will dig and call. The more important the miner becomes, the closer the water is distributed.

It is best to carry out such investigations during a period when there has been no rain for a long time, or when there is no dry spell. This way you can better determine the location where you can start drilling.

An aquifer is a ball of water that can be found in the middle of soft, rocky or dusty rocks. Underground soils can accumulate water or allow it to pass through due to porosity. To find out the water in the market, you can ask the farmers or find out your own traditional methods.

Yak viznati aquifer ball

The first rhubarb, which has enough water - about 5 m below the ground. Ale rіdina, which is visible, cannot be exploited for everyday purposes. Ale is perfect for watering, and such a drill is perfectly suitable for a garden. The depth of flooding of aquifers suitable for hygiene is 20 meters or more.

This water is not suitable for drinking and preparing liquids, as it cannot be passed through a treatment station with a rich purification system. The ideal option is an artesian bore, but in this case the depth is from 100 to 350 meters and it is practically impossible to drill it yourself. Although water is good for drinking, and water is good for health.

The top balls do not lie horizontally. In some places the stench extends to the level of one or two meters, in others it is several times deeper. The task of directing the lower entry points is to know the place where the water reaches the surface of the earth at a minimum height. And a number of effective methods have been tried for centuries.

Clay dishes for the extraction of water-bearing balls

The essence of this method is that earthenware is placed on the territory of the plot to be dried. They should be deprived of dry weather and burn to the bottom. As water-bearing balls are laid under the installation site, water appears under the dishes. It became possible to further refine this search method.

Silica gel is used, which needs to be dried in the oven. Yogo sips at the clay miner. Cover it with fabric and call it, and write down the results. Then bury the top of the pot to a depth of up to two meters and place it under the ground for extraction.

After 24 years, the miner will dig up and call again. If the mass has increased, it means that the soil has a vologa. Having buried a bunch of miners, you can find out who is closest. This is how you can reveal an aquifer when drilling a hole for water or when digging a well. Closer to the retouching there, where the silica gel has gained more mass. For example, ceramic pots, clay shards, and fired clay are also used.

Roslini yak display of water-bearing ball

The skin culture is characterized by the same type of rhizome. Plants grow in places suitable for normal growth. Therefore, based on their growth, one can judge the depth of the aquifer. In this case, the presence of one or two vapors does not seem to be enough to judge the presence of ground water. If there are a lot of trees of one type on the surrounding area, it is difficult to calculate the depth:

1. Cattail grows there where the water reaches up to one meter.
2. The food is growing in places where the water is no more than 3 m-code.
3. The three-meter mark is also suitable for the normal growth of black poplar.
4. The five-meter depth is suitable for the growth of sarsazan of the Amaranth family.
5. For polyna, a lot of radish is not needed, the root is long-lasting, and the wine grows there, where the water is 6-7 m.
6. Alfalfa, although it looks succulent, grows at heights up to 15 m to the water layers.

There is no sense in trying to overhaul all the growths. It is necessary to see which plant is localized in the area and where it is greatest. On the Internet and specialized literature you can look up the roots of the root. This is due to the presence of clay in aquiferous soils.

Natural phenomena as a showpiece

For this method it is necessary to keep an eye on natural phenomena that appear on the surface of the earth. The proximity of water causes the earth to expand and dew to fall on the grass. The sprouts in such places are thicker, the leaves are more juicy, and there is a richer green fermentation.

What is important is the relief of locality. Before that, as you mean the water-bearing sphere, when drilling the bore, there is a particularity that lies in the offensive. Close aquifers change the relief, eroding the soil. In such places, pits and pits are created. Pagorbi ta visochini talk about those who got to them buriti for a long time. It is noticeable that for this purpose it is not necessary to use everyday special features.

Frames are the most popular method of searching for water: its particularity

To effectively handle pendulums and frames to search the water-bearing ball, you need specific skills. For a long time, people who have extrasensory abilities have been involved in this, and residents of towns and villages have been so respectful. The method of basing on biolocation does not mean that this method of searching for groundwater is the proportion of waste.

Now the frames disappear from the copper and steel frame of the letter “G”. Take the piece by hand with your hands. Large (up to 30 to 40 cm) placed horizontally. It is important that the two frames in your hands are parallel to each other. The “dowser” guards the well-travelled ones by their behavior.

In places where there is a nearby layer of water, the frames should cross each other, and there, where there is no water, the stinks are different. Foldability is due to the fact that the force of interaction is extremely small, and is rarely felt or manifested. Previously, instead of metal darts, they were decorated with elderberry shoots up to 35-40 cm long. Forks of viburnum, willow, and vine shoots can serve as frames.

A pendulum swings around the frame. Tse kulya chi cone, hanging on threads for 35-40 div. in places where there is water nearby, the pendulum comes out of the horizontal position and begins to swing out of the vertical position on its opposite side. In some cases, beware of the wrap. The head means which comes naturally, and which is a result of the vibration of the hand.

Original and more popular video on the topic

Kozhen, who wants to drill a hole, must read about how to find out at what depth the water lies. You can earn money in the following ways:

1. For additional help, pottery, silica gel, shards, etc.
2. Significantly, the purchase of growths of one type.
3. Keeping an eye out for natural phenomena in the countryside.
4. Zastosovuyuchi principle of biolocation.

Which method to choose is individual on the right.

Some methods indicate more accurately, rather than stagnation, since external manifestations do not differ from place. The relief can be even, the lines can be evenly distributed, etc. In this case, you can try a vikory frame or a pendulum. If you want to know exactly, it’s better to get to the process of fakhivtsiv, which is to conduct geological exploration.

There are many ways to know the water and correctly determine the optimal place for digging a well or a drill of any type in a garden plot. In order to correctly know the water-bearing sphere near the earth, both technical and fateful people's habits are discussed.

At what depth can there be nutritious water?

In order to select the optimal depth at which underground water flows and properly excavate the aquifer, it is necessary to take into account various natural factors, the fragments of aquifers are rich, and their depth, much of the surface depends on the peculiarities of the geological formation:

• Ground water lies above an aquifer close to the surface;
• Above the waterproof surfaces, the top can accumulate, which is the best way to excavate Abyssinian wells;
• on the territory of the central part of our region, it is most often developed from buried areas at intervals of 5-40 m;
• Ground water most often has low acidity and is characterized as unsuitable for food purposes;
• between the aquitards, at a depth of 15-60 m, the aquifer of interstratal waters with high acid characteristics and minor seasonal rock formations on the surface should be filled;
• The main variety of interstratal waters is represented by artesian water-injecting balls at a depth of 50 meters and is graded by level-level steel and high viscosity.

Incredibly, the most clear nutritious water can be extracted from the purest artesian waters, but when duplicating such waters it is necessary to incur high costs. Ground water, especially the upper water, is not the best source of water supply, Therefore, in order to enhance the organoleptic properties of such water, it is necessary to stagnate the filtration system.

It is also important to remember that the maximum depth of the well with concrete rings is approximately fifty meters, so that with large displays you can avoid jamming the structure of large earthen stones. Thus, the optimal depth of the water supply can be determined by looking at the technical capabilities, the structure of the soil and the qualifications of the worker.

How to find water in the area beyond the framework (video)

The best ways to search for water in a garden plot

In order to find a place for cleaning the aquifer, you don’t need much effort. This problem can be helped by the folk method or the inconvenient technical procedures that can be achieved independently.

How to scoop water for additional honey dart

For additional honey, the aquifers lived and often searched for water. Such a biolocation frame has an L-like curved dart with one side of 25 and 15 cm. For a perfect wrap in the hand, the short ends of the dart need to be inserted into wooden tubes. When placed above the aquifer, the frames are opened 180 degrees and stand, which allows us to determine not only the location of groundwater, but also its boundaries.

Roslyn tips

Due to the presence of close water contamination, the growth results in greater preparation and a more juicy appearance. The main natural landmarks are willow, willow and wild sorrel, which most often grow above the water vein. You can also allow the soil of the aquifer to fall behind the advancing vegetation:

• cattail - up to a meter;
• line of words i – up to three meters;
• and outline - up to three to five meters;
• Polin volotisty - up to seven meters;
• whose sparkle is up to eight meters.
• naked licorice, polny and yellow - up to ten meters.

Stagnation of willow vine

The water pumper is guilty of trimming the end of the slingshot, stretching his fingers under his ankles. During the complete walk around the plot, the upper part of the slingshot gradually slopes down or rises a few millimeters uphill, which indicates the presence of an underground water vein.

Exploration drilling

Prospecting for water is one of the most promising methods for obtaining reliable information about the presence of an aquifer. Exploration drilling is carried out using compact drilling rigs or hand drills. In addition to this, it is possible to save landscape cover and, in the shortest possible time, determine the depth of the water, and add soil to the water supply site that is planned.

Watch out for the weather and animal behavior

The horse that smells the sprague is a hoard, and the dog paws the ground above the water hole. The trigger does not live in dry places, and the axis of the hammer searches for oviposition in the same place. Also, the presence of high-lying waters can be evidenced by the presence of mosquitoes and midges after sunset, thick fog and even clear wound dew both on the grass and on objects.

Search for water for the well (video)

How to determine the acidity of water

The soil and groundwater on the territory of our region are largely obstructed by outlets, which cannot but appear negatively on the clear indicators of water that appears from drill holes and wells. To ensure your health, you must carefully check your water supply. . In the home minds, the test of the taken image is summarized as follows:

• Heat a liter of water to a temperature of 20 °C and check the presence of odor and odor;
• If there is no unpleasant odor, the liquid can be heated to 60°C, after which a verification similar to the first test is carried out.
• clean, without any foreign odor or taste, the water is not to blame for the mother’s insignificant preparation or cloudiness, and a drop of water applied to the surface after drying is not responsible for causing separation;
• At the stage of severity, verification is carried out using boiling water and assessing the strength of the siege. The presence of a dark gray precipitate indicates the high concentration of oxides in the water. The presence of a light-yellow precipitate makes it possible to obtain information about the potency of calcium salts and various oxides.

Since this is the least standard of care, it is necessary to ensure that chemical, bacteriological and microbiological testing is carried out in the laboratory. It is important to note that the samples collected from groundwater are cloudy and are contaminated with saliva oxide and salts. Indicators of insight in laboratory brains are measured by a colorimeter.

Criteria for choosing a place for drilling and digging a well when a number of rocks are identified

On the territory of the Moscow Region, the illegally accessible water reserves are on par with the first water supply. As a rule, on a daytime descent the ball lies in the depths between 30-70 meters, and on a daytime and daytime approach it lies between 70-100 meters. when turning over the verdlovin will be muffled, and a significant fine will be imposed on the owner, since water supply will require the execution of special documents.

To extract clear drinking water from great communities, it is necessary to draw up a package of documentation in order to comply with Rosspozhivnaglyad and other organizations:

• contacting the regional Ministry of Natural Resources to review the feasibility of drilling the Artesian Sverdlovsk;
• visit to the site of the pre-drilling commission, which includes hydrogeologists and representatives of Rosspozhivnaglyad;
• for evidence of a positive outcome, a license is issued in accordance with the law “On Nadra” for the evidence of a certificate of the right to acquire land plots, a cadastral plan and a general plan for further oblivion. There is no local water supply and sanitary disposal area.

In order to revoke a license, it is necessary to obtain the balance of water supply and water supply in the regional water department, as well as the sanitary and epidemiological authorities of Rosspozhivnaglyad, after which a drill design agreement is drawn up, which is transmitted to the SES. If the package of collection documents is correct, the license for the drilling plant can be obtained within three months. After the storm, it is necessary to issue a passport for the water supply plant on the basis of the permissible documents of the state acquisition and state-geological examination.

Yak vikopati well (video)

Regardless of the fact that the drilling of the artesian river is accompanied by the trivial collection of documents, the removal of the water jet is a popular approach and even demands from our region, the fragments can be removed without interruption. There is no water supply.

How to find water for the Sverdlovina on the plot - the food that nourishes the skin, who from the purchase turned into the ruler of this plot. There are two options for a solution - cost-effective and cost-free. Having returned to the fakhivtsi, you will immediately have to pay a sum of money, and at the same time pay decency to your dear ones. It's easier to know the water yourself.

Water-bearing ball

The soil has a splinter. They are separated from each other by waterproof balls. The depth of this polluted area is varied, sometimes reaching tens and hundreds of meters. The area closest to the surface of the soil is called “upper water”. This water can be used only for technical needs, but not for living. The depth of perched water can be as low as 1-2 meters. It is created by the accumulation of meltwater, atmospheric precipitation and percolation through the ground from adjacent water. You can hang out in speculative weather.

Groundwater diagram

The falling pools of water begin at 8-10 m. Their water, in its characteristics, is entirely suitable for human life. Water raised from a depth of 30-50 meters is especially valuable. Artesian water lies at a depth of over one hundred meters. It is not rational to drill such deep holes in a field. In addition, at this time there will be a special permit from the government authorities, so this water contributes to the power of the state.

Sounding water

Becoming the ruler of the aquiferous Sverdlova is not as easy as it appears at first glance. First of all, we need to know the place in order to give the best results. Why do you have to waste a little of your precious time, but the result is all worth it? It is necessary to start searching from the area adjacent to the plot. Having completed the analysis of the location of the expansion of the Western drills, you need to think about how to unite them with one line. The passage of this line along your property is always close to the place of the drilling of the Sverdlovin. On the right, there is a large mirror of water that runs along one line between the water holes. If you don’t need to be quiet in front of something, it will never happen again. It is necessary to continue the search.

Literally a hundred times ago, people who were nourished had to profit from the clues of nature. This place was chosen as a way to analyze the plants that grow, as well as the behavior of animals. With time and the development of technology, methods such as test drilling and compilation of hydrogeological maps, which indicate the expansion of aquifers, have become available. However, such maps are not available for all areas and settlements, but the trial will allow you to obtain additional material and physical expenses. That's why old methods are also more popular.

Porada. To accurately determine the location of water contamination in a business, it is necessary to use all available methods for identifying the location. Supplementation of the results at the most optimal location for drilling in Sverdlovsk.

Ways to search for water

There are many ways to search for a water-bearing sphere. Intellectually, they can be united in the following group:

• analysis of natural phenomena;
• use of available technical tools;
• biolocation;
• trial storm.

However, these methods will help you to correctly identify the overflow of water, and taken at once you will be able to increase your ability to do so quickly.

Important. In the case of a storm in the Sverdlov, one method for determining the location of groundwater contamination is not enough.

A hint from nature

Most often, nature itself orders that when ground water is polluted, the water must be filled precisely. You just need to be a little careful and sort it out better. There is a lot about the revelation of growth. About the near flood of water, let us first talk about the debauchery of the forest. Whichever is brighter and lower, the water is closer. The thickets of willow and willow, wild currants, so they say on it. And if apple and cherry trees don’t take root, they get sick – it’s a big deal. So the very indicator is anger. It is necessary to increase your respect for herbs. Cropweed, sorrel, licorice, and sedge are less likely to grow in the immediate vicinity of groundwater. Moreover, the trees can indicate the depth of the aquifers.

Oriental depth of stagnant water

A wealth of useful information on this topic is provided by the behavior of creatures, birds and mosquitoes. For example, a dog does not like nearby groundwater, but for the gut it is happiness. Look at how the dog is not in the best position to do the work. Moles do not like the damp earth. The chicken will never move into areas with low levels of groundwater. There is no place in such places and ore moors. And, as a matter of fact, the curly legs of various midges directly indicate the presence of water order.

About the shallow groundwater, there is a thick fog that spreads, and the settling of clear dew on the grass of the fringe.

Tsikavy vysnovok. Technical methods for eliminating groundwater contamination have recently appeared. There have been a lot of cries before. It turns out that there is no reason to believe the nature of the bases.

Vikoristamo silica gel

The old grandfather's method of identifying groundwater using a clay pot has been refined. Previously, they took a dry clay pot and placed it near the place, where the presence of water was transferred. If there was fogging on the walls of the potter, this indicated that there was ground water. The thickness of the fogging was determined by the proximity of the aquifer. Having moved the pot several times, the most optimal place for digging a well was found. Nina's method of recognizing these changes.

Take good care of drying silica gel, it is very important that it starts to sizzle in a clay pot or I will scour the jar. The container with silica gel is wrapped in cloth and buried to a depth of 0.5-1 m at the site, where the drilled drill bit is transferred. Through the process, everything is distilled, the silica gel is mixed and repeated several more times. Only the container will be buried in another place, 2-5 meters in front of the first one. The place in which the silica gel has collected the most moisture and will be optimal for drilling Sverdlovsk.

Silica gel

Before you go home. Silica gel – vologopolinach. After drying (roasting), the clay material again renews its properties.

The barometer also helps

Approximately you can determine the depth of the water behind the barometer. It is assumed that the difference in the vice is 0.1 mm Hg. Art. This indicates a distance of 1 m. Thus, by checking the surface of the nearest natural reservoir and at the point of the drilled drill bit, the approximate depth of the ground water can be determined.

Barometer scale

butt rozrahunku. If you die, such data will be removed. Press on birch with water 760.2 mmHg. Art. The vice at the point of the drill bit is 760.8 mm Hg. With more, less is visible (760.8 – 760.2 = 0.6), translating the result into the meter and deducing the approximate depth of the water - 6 m.

Bring back respect. The barometer does not measure the water, but helps determine the depth of the water.

Come for additional help... frame

One of the proven and popular methods of finding water for drilling at home is the biolocation method. For this purpose two frames are prepared. These are mainly aluminum or copper darts with a diameter of 4-5 mm, a length of 40 cm. The height is 10 cm and bends under a straight cut. Tse maybutniy utrimuvach, or a pen. We insert the trimach into the elderberry stem with the core removed so that it can easily turn around in it. The length of the heel is selected according to the width of the valley. That's it, the frame is ready. So we just shy away from a friend’s frame. Then things start to get better.

Look outside the frame

We take the frames in our hands so that the arms appear pressed to the sides, and the straight hands and forearm become parallel to the ground. Drits straight ahead, in the direction of the crash. The shaft begins to collapse completely, and at the moment of sticking the dart over the water-bearing ball, the dart collides. We place the pole in this place and quilt the plot further, and begin to collapse in a direction perpendicular to the original one. The place where the quarrels have arisen again means the point of the drilling of the Sverdlovin.

Porada. Instead of this, you can use the original welding electrodes. Information before thoughts. Scientifically, this method of removing water does not tarnish, but it works. Moreover, in the hands of a very skinny person.

Sample storm

After all methods of searching for water have been tried, testing or exploration drilling can begin. Most often, the final stage is to search for the water-bearing sphere. Otherwise, apparently, from the investigation, it is recreated on the basis. Of course, you could start right away, but here you need to add a few factors. The truth is that the process of exploration drilling itself can be complicated, troublesome and expensive. Besides, you may end up with the Fahivs. And most importantly - you determine the parameters of the future drill, but do not bother it. After exploration, the depth of the aquifer, the volume of water in the new soil, and the nature of the soil will become clear.

Self-propelled hand drill

Alya Sverdlovin had a chance to buriti, as it seems, for okrema pay. In our case, the exploration drill is based on the sum total of all the previous work. Real confirmation of the presence of water.

In reality it looks like this. Take a garden-grade self-propelled drill. Screwing it into the hole at the point where the water is located, you will be very afraid to twist the hole. The drill must be removed and cleaned through the skin 10-15 cm. This robot trivaya doti, docks will not reach the water-bearing ball.

Before you go home. In practice, mechanical and electrical storms are most often affected.

There are no problems with finding water for the river in your area. As a result of the rich evidence of high nutrition, all robots can be launched independently with minimal financial investments. Clean, cold water will become a good city if we invest our strength.

Crying at the dacha for an hour with a single glass of nutritious water and I want the water in the new boiled water. Therefore, at the stage of searching for water, it is necessary to know in which depths the best water-bearing veins will grow. To reach them, you need to trace the entire plot and choose the most distant place. Let's look at how to find water for a well in different ways.

Rotating of aquifers near the ground

The water in the ground is drained directly into waterproof balls, which are not allowed to reach the surface or deeper. The main component of the balls is clay, which is highly resistant to moisture. Sometimes the stones become jagged. Between the clay layers there are pits of prosharoks, which drain away clean water. This is a water-bearing ball, which is necessary to reach in the process of digging a well.

In some places the vein could be thin, in others it was of great size. The greatest amount of water comes out of the water-drinking ball, which does not flow strictly horizontally, but with differences in heights and bends. And there, where the clay begins to bend, it changes direction in height, and its own breaks appear, which are replaced by a hollow sand. These places are filled with water, which are called underground lakes.

How to store the acidity of water in deep water?

When digging a well, you can reach the water-bearing vein as much as 2-2.5 meters above ground level. From such water-bearing versts there is no supply of water for drinking. Through the proximity to the surface of the soil, water from boards, snow, water, and sewage penetrate into the vein, causing the water to become cloudy and, therefore, to thicken its liquid. Among the Fakhivs, such surface lives are designated by a special term - tops. Until then, the goal remains unstable. Since the inlet costs sinter and there is no plank, water from the upper lakes is also lost in the wells. So, during the “peak” summer season, summer residents may be left without water, and even until the fall.

The optimal depth for pumping water for a well is 15 meters. At this depth there is a line of continental sands, which can accommodate large quantities of water. And the significant amount of food in the bowl contributes to the maximum purification of the aquifer due to the intense pollution and “chemistry”.

Poshuk aquifer lived by careful methods

To know the water, don’t hesitate to ask specialists. For many centuries, people in the villages made do with self-tightening, vikorista and care for nature and creatures.

Watch out for the fog

It's early in the morning, or before evening, look around the plot. There, close to the groundwater, fog appears on the ground. And its consistency can indicate how deeply the aquifer vein is buried. Where the fog is thick, the water is closer. Fogs, screaming fog that rises from the ground, do not stand still, but come out in clubs or creep along the ground itself.

Behavior of creatures in specu

Polish mice do not build nests on the ground if water is close. The stench transfers its life to the high growths and the branches of the trees.

If the ruler has a dog, then, if there is a concern, it is necessary to keep an eye on its behavior. As a result, the horses begin to search for water in the soil and beat their hoards in the place, where the water is at its peak. Dogs want to “bring up” their body temperature a little, so they roam around wet areas and hang out in them. Vologa, when vaporized, cools the earth, so the creatures will lie down at these points.

Dogs sense nearby water and scurry around these places to get away from the heat.

Poultry is also a good indicator. The trigger does not rush there, as it senses the proximity of water, but the driver specially selects a place where the water-bearing veins move.

In the evening, if the sizzling subsides, you can watch out for midges. The stinks begin to gather in clusters and set up stinks over the most wet parts of the plot.

Method of exploration drilling

Assortment of indicator plants on sale

For a long time, people were informed about the depth of the aquifer in the aquifer. Volophiles should never live in places where the ground waters are even deep. If at the dacha there is already a rampage of mother hemlock, hemlock, sorrel, and weed, that means there are enough vines in the ground.

Behind the bushes that grow in the dacha, you can determine at what depth the aquifer runs.

Vilkhi, willows and birches are good to grow on wet soils. If their crown is folded into one side, it means that there is a trace of a water-bearing ball there. Apples and cherries will not grow well in places from the nearby river of groundwater. The fruit gradually rots, and the tree suffers from illness.

Practical methods for searching water for a well

Be careful, for jokes you can quickly use different combinations. Let's look at how to collect water for a well using additional items.

We are putting out glass jars

The French parted throughout the entire business, however, they scoured the jars, turning them upside down to the ground. Turn over any wounds that have condensation. The larger the one, the closer the water-bearing ball.

Decomposed separately or whole

We hope that the soil does not fall out for a couple of days and the soil becomes dry. We take dry salt or crushed into small pieces of red whole, pour it into a clay pot (unglazed). It’s important that we record the testimonials, wrap everything in gauze or spandex and bury it in the ground for about half a meter. Through the extraction, the miner is removed, the material is removed and reused. The greater the diversity in the mass, the closer the aquifer. Before speaking, silica gel will be removed from current hair-accumulating materials.

Indication by aluminum or wicker frames

1 way:

• We take two 40 cm strips of aluminum and fold them 15 cm under the straight edge.
• We insert it into the empty tube (it is necessary to cut out the elderberry and remove the core).
• We check that it rotates freely in the tube.
• We take the pipe in our offended hands and walk through it. The ends of the dart swing and flare up to the left and to the right. As soon as a water-bearing vein appears under your feet, the darts will converge to the middle. If water appears right-handed or left-handed in front of people, the ends of the darts turn to the same side. We passed through the water-bearing vein, and our sides are about to flare up again.
• Having discovered the place where the aluminum has collapsed, go through it again, but perpendicular to the direction in which the kidneys collapsed. If the mishap happens again, dig a well there.

Method 2:

• We draw a line from the vine, in which there are two forks on one trunk, so that they go under the cut at 150 degrees, one to one.
• We bring it home and hang it.
• When we arrive at the dacha, we take the ends of the nails with our offending hands, so that we place the tops in the middle and straighten them up.
• We walk around the farm. The trunk has reached down to the ground - there is a trace of water.

Raised on the mountain, the vines reach the ground, as they only see nearby water

The vine and aluminum give a signal that there is water in the ground, but there may be perched water, which is not suitable for a well. Therefore, after the location has been identified, a forward drilling should be carried out in order to understand at what depth the aquifer is located.