Mixing bag for warm conditions meibes instructions. Buy pump-mixing vuzol maybebes. Meibes Thermix unit switching diagram

Description

The Meibes Thermix mixing unit with a thermostatic drive and a Grundfos UPS 15-50 MBP pump is installed to organize heating of a low-temperature heating circuit (warm substrate) with an area of up to 120 sq.m at a time from wall-mounted boilers. lie down in front of the plant. The mixture is controlled by an additional thermostatic head with the ability to regulate the temperature from 25 to 50 °C. Installation of the mixing unit is carried out directly in the combustion chamber of the hot water boiler by simply connecting it to the supply and return piping of the combustion boiler. The kit comes with all the necessary components for installing the module with a cauldron. All final devices are combined into one brass block and stored under insulation to reduce heat loss.

The advantage of this pumping group over traditional schemes is the hydraulic independence between the heating circuits, for example, the operation of a warm substrate during the off-season and summer hours whenever the radiator heating is switched on.

The warm substrate mixing unit for wall-mounted boilers Meibes Thermix allows you to burn up to 120 sq.m of warm substrate with the possibility of switching on several scorching collectors. When the mixing group is installed, the working mechanisms move from the living area and eliminate possible discomfort during the operation of the mixing pump-mixing unit.

Advantages of the Meibes Thermix mixing unit

work on the circuit in the summer and in the off-season
installation directly under the scorching boiler
connection to boilers of any kind
The delivery set includes the entire connection kit
more compact design of the mixing unit
introduction of hydraulic separator
circulation pump Grundfos UPS 15-50 MBP
three-way zmishuvach

Description of connection to the Meibes Thermix pumping group system

Gas wall-mounted boilers are adapted for direct supply of heat to the radiator. This mixing unit is connected to the combustion pipelines on the boiler and takes high-temperature coolant from the supply line, cools it with a mixture of chilled water from the return line and ensures circulation of the prepared heat transfer fluid in the pipelines of the “substrate heat” system. Between Thermix and loops of warm substrate to heat, separate collectors with vitratomers are installed. They will ensure an even distribution of heat flow through the pipelines that are heated.

Meibes Thermix unit switching diagram

Designated:

Wall-mounted gas boiler with a pump.
Radiators.
Corrosive pipes of the "substrate heat" system.
Mixing vuzol Thermix.
Kit for balancing the Thermix hub (art. 27410.1).
Shafovy separate collector with vitratomers.

Technical characteristics

Designated:

1 - circulation pump
2 - seat valve under the thermostatic head with a capillary wine sensor (scale "1,2,3,4,5" - indicates supply line temperatures of 10 °C, 20 °C, 30 °C, 40 °C, 50 °C consistently )
3 – block thermal insulation EPP
4 - collet tee
4-1 - connection side of the radiator heating system (collet DN 22 mm under the middle pipe)
4-2 - connection side to the boiler HP 3/4"
5 - multiple heat-insulated pipelines for adaptation to any loosening of the pipes of a wall-mounted boiler
5-1 - stainless steel pipe DN 20 mm
5-2 - bunk thermal insulation
6 – brass body
8 - sealed sleeve for the temperature sensor (temperature sensor is included in the kit)
8-1 – main temperature sensor (element similar to the main thermostat)
8-2 - capillary that connects the middle temperature sensor to the thermostat
9 - connection pipes for the "heating subfloor" system HP 3/4" Eurocone
10-balance secondary bypass valve
11 - Mayevsky tap
12 - primary bypass plug (fits when the balancing kit art. 27410.1 is installed)
13 - technological plugs (for cleaning channels 15 and 16)
14 - first bypass (when plug 12 is removed, the one connected to the balancing kit plays the final role of the hydraulic needle)
15 - bypass of the exchanger (supplies to the exchanger for cooling the coolant)
16 - second bypass (provides an additional supply to the mixing unit. This ensures a change in the hydraulic support, the flow through it is adjusted according to the instructions included)
17 - dowels for fastening to the wall
18 - consoles that are configured after installation for wall mounting (install Thermix against the wall to run the flame, hot water and gas pipes underneath it)

All products of the Meibes company, which are designed to create a burning system, are characterized by reliability, durability, and also have a low price, as compared with other European companies Iyami.
Due to the fact that the installation is fast, it takes an hour to install the equipment, which is due to the fact that the equipment can be assembled without any welding work.

Pump group for scorching Meibes.

This pumping group is essentially a ready-to-use module designed to connect the boiler room. This module can be used with boilers of any type, and it can be installed in hot water systems of any type. The pump group has an effective design of the fittings for the boiler equipment, as well as the folding structure of the sump tank, which ensures easy and manual installation, the cost of the connection itself and the steady circulation of the heat transfer itself. All Wikonian devices are in the same style, but their functionality is subdivided.
Groups of quick installation are divided among themselves behind their warehouse. To choose the right group for you, you need to thoroughly familiarize yourself with the information about it.
Due to the fact that the units have been assembled, as well as the elements that connect the boiler itself to the combustion system, the flanges are assembled, as well as the threaded connection itself, which is being assembled faster.
The small pumping group for scorching also has shut-off valves, which are suitable for scorching systems. Due to the fact that the parts of the group are assembled at the factory, they are more reliable when compared to those that have been installed.

The pump group of the company Meibes will be a new product, as it will compare with the properties of other companies:

· It is handy, comfortable and technically perfect.
· You can use different variations.
· There are two thermometers, as well as a stabilizer.
· Has thermal insulation.
· There is also a hydraulic arrow, which is connected to the wind separator, wind drain and sludge trap.

Approach the Meibes pumping group.

In our online store you can add a pump group from the Meibes company to help you create a comfortable microclimate in your home. This group can be in various modifications, so you can quickly install a boiler room. You can find all the information on the pump group that you need in the product card.
If you have problems with your nutrition, you can now opt out of the cost-free consultation of our fachivts. Why just contact us in any way that is convenient for you. Also, they will tell you that with additional knowledge, you can make the installation process easier, as well as increase the capacity of your scorching system.
To order a product, contact our managers, they will show you the availability of the product in stock (this is a warehouse program in which you can pick up your product on the same day of ordering), as well as the price for your order. We have various promotions, as well as discounts on products.
We have cost-free delivery (a report about it in the “Delivery” section), in which you pick up your goods at the terminal, and also do not spend an hour on the road to the warehouse.
By purchasing a pumping group from the Meibes company, you can reduce the cost of installing equipment, and also get rid of a reliable scorching system.
Thanks to the great selection of products, you will find the ones that suit your specific need.

The installation of the Meibes brand for folding scorching systems offers reliability, durability and, at the same time, low price, compared to other European manufacturers.

Groups of quick installations are allowed to speed up the hour of viconnanny agreement. The modules are assembled without welding tools.

Pump group Meibes for scorching

The ergonomic design of the fittings for the boiler and the folding bowl ensure simple and manual installation, cost-effective connection and stable circulation of heat transfer. The Maybes group pump is a ready-made module for piping a boiler room. Suitable for boilers of all types and hot water systems under various generators. The installation of Wikonan has a single design, but has different functions.

Group of Swedish montage Meibes Please check for complete set. When choosing this, you need to quickly navigate through the information diagrams.

The components that connect the boiler and the burning system are equipped with flanged and threaded connections, for which folding robots are carried out more quickly.

The compact pumping group for combustion is supplied with shut-off equipment, which complies with the design standards of heat supply systems. Valves, bypasses, faucets, and thermometers assembled in factory drains are identical and reliable, at least.

Pump group Meibes has a number of advantages over owning other vibrator:

Ergonomic.
Wide range of zastosuvannya.
The presence of two thermometers and a stabilizer.
EPS thermal insulation.
The presence of a hydraulic boom with a water separator, a water drainer and a sludge separator.

Buy pump group Maybes on Terem

The online store will help you create a comfortable temperature in your booth. The Meibes group pump, which is available in various modifications, ensures smooth installation of the boiler.

We pronounce:

Best prices.
Qualified consultations.
Additional equipment, in order to ease the folds and expand the capabilities of the opaluvial system.

Buying a pump group of a well-known brand means that you will spend less on installing the equipment and will have a reliable heat supply system in operation.

A wide assortment allows you to choose the very equipment that suits your specific skin condition.