HL roof vents with vertical outlet. Virva cover with electric heater, how much to install? Packaging and saving

The disadvantage of such a system is the complexity of the water introduced, which can accumulate on the surface during precipitation. And it became clear that the stingray is day and day and the water simply has nowhere to go. Especially since the design conveys the appearance of dull dry parapets. Special tools for flat dahus help with the most common problems. They allow you to clearly clean up the point of water discharge and protect the entire system from getting into big congestion. In addition, there are many options today that are equipped with heating to melt away ice and snow that may accumulate in places where they are melted.

Where can I find funnels for flat roofing near Moscow?

The company "KSK24" is a distributor of wire-based chemicals and foreign manufacturers of roofing aerators. From our online store you can buy flat coverings at the best prices with delivery in Moscow and the Moscow region.

HL roofing drains with vertical outlet - HL 62, HL 62.1 and others, are suitable for various types of flat roofs, both for non-use and for use. The HL roofing systems are combined with different structures (types) of the coating and the surfaces of the “pie” of the coating. Mounted on existing roofings, insulated flat traditional roofings, roofings made from corrugated sheets (profiled sheets), “green roofings”, and can be installed on balconies and terraces. Virvi HL is designated for the removal of roof water and melt water from roof drains.

In whose section it is indicated:

Virvi HL with a vertical outlet for unused roofs. From the leaf catcher. DN - 75, 110, 125 or 160;

Virvi HL with a vertical outlet for roofs that are in use. With brackets (150x150 mm) made of stainless steel. DN - 75, 110, 125 or 160;

Virvi HL with a vertical outlet for roofing with corrugated sheets. DN - 75, 110, 125. For installation in roofs with insulation thickness - 100-160 mm.

Additional equipment for HL roofing systems - extension elements, cushions, waterproofing flanges, various sheet metal catchers, anti-fired couplings.

Virvi HL with a vertical outlet for unused roofs. From the leaf catcher. Rozmiri – DN 75, 110, 125 or 160.

		Description
		The roof is made of sheet metal, with thermal insulation, with an extrusion flange made of stainless steel (with union nuts/wings), with a vertical outlet. Recommended for hydroisolating polymer membranes: EPDM, EPB, ECB (ethylene-copolymer-bitumen), EVA (ethylene-vinyl acetate), PIB (polyisobutylene) etc.
		Like the roof of the HL 62, and with electric heat. Self-regulating heating cable. Tension – 10-30 W. Voltage – 230 W.
HL 62 P		Cover with sheet metal, with a body made of PVC (polyvinyl chloride) with thermal insulation for gluing the PVC membrane, with a vertical outlet. Recommended for PVC membranes.
		Like a cover with HL 62P, and with electric heater. Self-regulating electrical heating cable with tension 10-30 W, 230 V.
HL 62 F		The cover is made of sheet metal, with a body made of PP and thermal insulation for gluing waterproofing FPO membranes. With vertical outlet. Recommended for FPO membranes (PP based).
HL 62.1 F		As a cover HL 62F, and with electric heater. Self-regulating electrical heating cable with tension 10-30 W, 230 V.
		The cover is made of sheet metal, with a body made of PP with thermal insulation, with a waterproofing polymer-bitumen sheet with a thickness of 2.5 mm and a diameter of 500 mm. Recommended for waterproofing materials that are fused to a bitumen base. With vertical outlet.
		As a cover HL 62H, and with electric heater. Self-regulating heating cable. Tension – 10-30 W. Voltage – 230 W.
"Universal" types for unused roofs with sheet metal. With universal fittings for steel, steel and plastic pipes.
		“Universal” roofing system, with sheet metal, with an extrusion flange made of stainless steel (with union nuts/wings), with flexible rings, with a vertical outlet. This liner easily and reliably connects to pipes made of any material (steel, steel, plastic). The valve is inserted into the middle of the pipe and does not interfere with the compensation pipes.
HL 69 P		“Universal” roofing pipe, with a sheet metal hose, like HL 69, and with a PVC flange, for fastening a PVC membrane, a pipe with flexible rings, with a vertical outlet. The HL 69P funnel easily and reliably connects to pipes made of any material (steel, steel, plastic). It is inserted into the middle of the pipe and pulls out the compensation pipes. Recommended for hydroisolating polymer membranes: EPDM, EPB, ECB (ethylene-copolymer-bitumen), EVA (ethylene-vinyl acetate), PIB (polyisobutylene) etc.
HL 69 H		“Universal” roofing material, with sheet metal like HL 69, and with polymer-bitumen fabric, with flexible rings. With vertical outlet. Virva connects to pipes made of any material (steel, steel, plastic). The valve is inserted into the middle of the pipe and does not interfere with the compensation pipes. Recommended for hydroisolating polymer membranes: EPDM, EPB, ECB (ethylene-copolymer-bitumen), EVA (ethylene-vinyl acetate), PIB (polyisobutylene) etc.

Virvi HL with a vertical outlet for roofs that are in use. With frames 150x150 mm made of stainless steel. Rozmiri – DN 75, 110, 125 or 160.

		Description
HL 62 B		A roofing system with thermal insulation, with a pressure flange made of stainless steel (with union nuts/wings). With a vertical outlet. Recommended for waterproofing polymer membranes: EPDM, EPB, ECB (ethylene polymer-b itum), EVA (ethylene vinyl acetate), PIB (polyisobutylene) etc.
		Like a roof HL 62B, and with electric heater. Self-regulating electrical heating cable with tension 10-30 W, 230 V.
HL 62 VR		Covering system with thermal insulation, with a body made of PVC (polyvinyl chloride), for gluing PVC membranes, with a vertical outlet. Recommended for used roofing with waterproofing from PVC membranes.
HL 62.1 BP		Like a cover with HL 62BP, and with electric heater. Self-regulating electrical heating cable with tension 10-30 W, 230 V.
HL 62 BF		Coating with thermal insulation, with a body made of PP (polypropylene) for gluing FPO fabric. With vertical outlet. Recommended for coating with waterproofing FPO membranes (PP based).
HL 62.1 BF		Like a roof HL 62BF, and with electric heater. An electrical cable that self-regulates and heats up. Tension – 10-30 W. Voltage – 230 W.
HL 62 BH		The roof is made with thermal insulation, with a waterproofing polymer-bitumen sheet with a thickness of 2.5 mm and a diameter of 500 mm. With vertical outlet. Recommended for waterproofing materials that are fused to a bitumen base.
HL 62.1 BH		Like a roof HL 62 BH, and with electric heater. An electrical cable that self-regulates and heats up. Tension – 10-30 W. Voltage – 230 W.
"Universal" tools for operating roofs with gratings (150x150 mm) made of stainless steel. from universal fittings to steel, steel and plastic pipes.
HL 69 V		“Universal” roofing system, with sheet metal, with an extrusion flange made of stainless steel (with union nuts/wings), with flexible rings, with a vertical outlet. Virva simply and reliably connects to pipes made of any material (steel, steel, plastic). The valve is inserted into the middle of the pipe and does not interfere with the compensation pipes.
HL 69 VR		“Universal” roofing pipe, with sheet metal, like HL 69 B, and with a PVC flange, for fastening the PVC membrane, with flexible rings, with a vertical outlet. Virva HL 69 BP connects to pipes made of any material (steel, steel, plastic). It is inserted into the middle of the pipe and pulls out the compensation pipes. Recommended for hydroisolating polymer membranes: EPDM, EPB, ECB (ethylene-copolymer-bitumen), EVA (ethylene-vinyl acetate), PIB (polyisobutylene) etc.
HL 69 BH		“Universal” roofing material, with sheet-metal material like HL 69 V, and with hydroisolating polymer-bitumen fabric, with flexible rings. With vertical outlet. Virva connects to pipes made of any material (steel, steel, plastic). The valve is inserted into the middle of the pipe and does not interfere with the compensation pipes. Recommended for hydroisolating polymer membranes: EPDM, EPB, ECB (ethylene-copolymer-bitumen), EVA (ethylene-vinyl acetate), PIB (polyisobutylene) etc.

Viruses with a vertical outlet for roofing made from corrugated sheets. DN - 75, 110, 125. For installation in roofs with insulation thickness - 100-160 mm.

		Description
		Virva Kolyvelna for the Pokrivel with a corrugated board, with a leaflet, we wrap it with a flange with stainless steel (with clocking nuts/"lambs"), with a heat -zo -vel, with an outbreak of a box (regulovnia in the ears - 100-160 mm). With vertical outlet. Recommended for hydroisolating polymer membranes: EPDM, EPB, ECB (ethylene-copolymer-bitumen), EVA (ethylene-vinyl acetate), PIB (polyisobutylene) etc.
		Like the roof of the HL 63, and with electric heat. An electrical cable that self-regulates and heats up. Tension – 10-30 W. Voltage – 230 W.
HL 63 P		Virvel is Virva for the Pokrivel with a corrugated board, with a leaflet, with a heat, with a rosema, with an editing box (a thoroughly-100-160 mm regulovnim), the HL 63, Ale with a smooth flange of the PVC, for the PVC-membranes KRIPLENNE. With vertical outlet. Recommended for PVC membranes, lightweight roofs made from corrugated sheets, with insulation thickness - 100-160 m.
HL 63.1P		Like a cover with HL 63 P, and with electric heat. An electrical cable that self-regulates and heats up. Tension – 10-30 W. Voltage – 230 W.
HL 63 H		Coating system for roofing with corrugated sheets, with sheet metal, with thermal insulation, with a separate mounting box (adjustable in height - 100-160 mm) like HL 63, and with a waterproofing polymer-bitumen sheet. With vertical outlet. Recommended for waterproofing materials that are fused to a bitumen base, lightweight roofing with corrugated sheets, with insulation thickness - 100-160 m.
HL 63.1H		Like a roof HL 63 H, and with electric heat. An electrical cable that self-regulates and heats up. Tension – 10-30 W. Voltage – 230 W.

Additional equipment for coating sprayers with vertical outlet of the HL 62 series

		Description
Extensions for shower chairs series HL 62
		An extension element with a pressure flange made of stainless steel and a humic gorge ring, 345 mm high, is sealed for a hermetically sealed connection with waterproofing, as well as with a roofing line on flat surfaces. insulated roofs where vapor barrier is evident, DN 125
		The extension element with a hydroisolating polymer-bitumen fabric and a gum ring of a gullet, 345 mm high, is sealed for a hermetically sealed connection with the bitumen-based waterproofing, as well as with a roofing strip on flat insulated roofs when vapor barrier is evident, DN 125.
HL 65P		The extension element made of polyvinyl chloride, with a humic ring of the gullet, with a height of 345 mm, is sealed for a hermetically sealed connection with waterproofing from PVC membranes, as well as with a roofing compound on flat insulated roofs where vapor barrier is evident, DN 125.
HL 65F		Extension element made of polypropylene, with a gum ring of the gullet, 345 mm high, sealed for a hermetically sealed connection with waterproofing from the FPO canvas, as well as with the coating layer on flat surfaces on filmy roofs where vapor barrier is evident, DN 125.
HL 65PE		Extension element made of polyethylene (PE), for gluing FPO membranes (PE based).
HL 350.0		An extension element with a profiled flange is assembled for mechanical fastening (underlaying) of another level of waterproofing. Height – 220 mm. DN 145
HL 350.1		An extension element with a pressure flange made of stainless steel, with a drainage ring made of PP for receiving water flow and an installation kit, can be installed for bitumen waterproofing. Height – 220 mm. DN 145
HL 350.1H		Extension element with waterproofing polymer-bitumen fabric, stacked to fit another level of waterproofing, height 225mm, DN 145
Shoes for shoes HL 62 series
		Liner for paint covers and extension element HL350.0, height 155mm. DN 145
HL 350.2		HL 350.1 with additional inputs. DN 40
Waterproofing flanges for washbasins HL 62 series
HL 84		Waterproofing flange with EPDM membrane 500x500 mm for roof drains.
HL 84.0		Waterproofing pressure flange made of stainless steel with a diameter of 220 mm for roofing pipes.
HL 84.CU		Waterproofing flange with a copper sheet 500x500 mm, for coating paints.
HL 84.E		Waterproofing flange with galvanized steel sheet 500x500 mm for roof drains.
Sheet catchers for casters HL 62 series
HL 160		Drainage flange for receiving water flow from waterproofing on inverted roofing. Ø 170 mm.
HL 161		Drain flange HL 160 comes complete with adapter Ø145 mm to Ø125 mm.
HL 170		Flat sheet metal catcher for roofing tools of the HL 62 and HL 64 series. Ø 170 mm.
HL 175		Stainless steel sheet metal catcher for roofing jets of the HL 62 and HL 64 series. Ø 145 mm.
Counter couplings for HL 62 series
HL 850		The opposite coupling for the HL 62 series (DN 75), between the inserts EI 120, which consists of a metal body with expansion material and a yoke, with a mounting plug. Vikorist is especially suitable for DN 75 outlets.
HL 870		The opposite coupling for roofing screws of the HL 62 series (DN 110), between the inserts EI 45, which consists of a metal body with a material that expands, and a yoke, with a mounting plug. Vikorist is especially suitable for outlets DN 110.

1.
2.
3.

According to statistics, 95% of leakage occurs at the junction of the waterproofing kilt with the flange of the steel pipe. This is due to the fact that the material for ensuring waterproofing under the infusion of excess fluid in the places of contact will wear out over time.

See the funnels

Drainage funnels are divided into the following types:

watering cans that move a vertical or horizontal outlet, or a rotary joint from where the pipe is installed 0-90 degrees;
for flat roofing, terraces and balconies;
watering cans for unused or used roofs;
roof funnels with heating, which operates behind the self-regulating cable, which changes the heat transfer in the deposit depending on the air temperature and without it;
Layers for coating from perforated steel sheet and other materials;
a roofing system with sheet metal with the possibility of welded waterproofing or with an extrusion flange made of stainless steel, for any type of waterproofing.

Advantages

Today's Virgos toil a lot of advantages, among them:

UV resistance;
the vaga is small;
good proper acidity (for this parameter of stench, turn over steel and chavun);
can reach temperatures from -50 to 100 degrees Celsius;
allow you to create a number of balls of waterproofing;
allow water to be collected from several levels (inverted roofs);
Its coefficient of reduction is approximately the same as the coefficient of linear reduction of materials for waterproofing;
Roof funnels with heating can be electrically heated, mounted directly into the body, which is why its reliability increases and the term of operation increases (read also: " ");
simple installation, there is no need to install compensation pipes with their caulking;
the presence of a self-regulating electrical heating cable, which does not require the installation of wine thermostats;
low energy consumption (up to 35 W);
fragments of the cable are located in the middle of the body, without having to worry about water jets;
No step-down transformer required, live within the 220 W limit.

Installation of roofing strips

If the heating main is laid near the roof insulation, it is necessary to protect the world from freezing. At the same time, if a water-injecting nozzle for a flat coating or a different shape has an outlet, it will be possible to freeze between the freezing zones, using the method of pre-creating ice at the outlet pipe. If you stand from the warm room to the washbasin, it adds up to more than a meter, it’s faster to rotate and the horizontal line. A lot of dust on a flat roof should lie flat. The greater the quantity, the greater the quantity will be required.

The spring moisture of the snow will depend on the wind temperature. If the snow has turned into water, but the ice in the pipe has not yet melted, and if the waterproofing has been created, the leakage will not disappear. The situation will worsen if the pipe is clogged not only with ice, but also with ice - which can be lost if a cover is installed with the leaf catcher.

On the video you can see the sequence of installation of funnels:

It is necessary for the drain to be built against the pressure that occurs when water accumulates, especially in the lower tier. The roof inlet is lowered and the cover is raised. Therefore, the installation of roofing pipes must be done in such a way that the connection of the funnel with the pipe is smooth and little damage is preserved while maintaining tightness. For this purpose, special transitions to steel and plastic pipes are needed. In addition, in order not to create a great pressure, it is necessary to install the correct number of screws on a flat surface.

A drain with a TechnoNIKOL pressing flange, which is heated, vibrates with a block copolymer and propylene, is intended for the treatment of internal drainage on flat roofs.

The Virva is equipped with a thermal cable for heating the water receiving bowl. Thus, in the autumn or spring, if the temperature often drops below 0 (C), the temperature does not freeze and is no longer productive. The thermal cable is connected through the thermostat or the power button).

Our online hypermarket is gradually expanding its assortment so that you can get everything in one place at a reasonable price. Find out about the products in the Painting Viruses category and you will definitely find out what you were looking for.

Advantages:

it is stuck together with a plumbing pipe d=110 mm from the pipe;
sums with all types of rolled coating materials;
complete with sheet metal catcher;
ensure constant water drainage from the roof no matter what;
use the trival term of covering service.

Packaging and saving

Supplied in branded packaging. Save at these locations.

You can purchase additional waterproof roofing sheets at a reasonable price on our online store. To stay informed about promotions and discounts on products, stay tuned for updates to the project.