The mixture covered the chimney up to the chimney. Sheathing the chimney with a metal profile or other materials

The part of the flue that protrudes above the vent succumbs to negative external influxes, which is why it is affected. The aesthetic appearance of the chimney may be indicative of the architectural concept of the fireplace. In addition, sealing the dahu around the dimar is to be done in order to avoid the reduced functionality of the coating cake.

Improving the flue: choice of materials

Before the negative factors that come into play, enter:

atmospheric influx (wind, fall, ultraviolet exposure);
Dovkilla temperature difference;
high temperature operating conditions.

Through the difference between the temperature of the working pipe and the temperature of the air, condensation is created in the chamber, which causes the pipe to collapse during the furnace firing process. To prevent condensation from forming and to protect the pipe from external inflows, it is necessary to transfer reliable insulation to the chimney behind the cladding shell.

To cover the protruding part of the pipe, various materials are used. When selecting a trace, select it:

resistance to external factors; wear resistance;
the new look and color scheme (similar to the roofing or finished walls).

It is recommended to remove the casing of the chimney before laying the roofing material in order to avoid damage or obstruction of the roof.

The favor of the smoke mover on the dakha most often coincides with the vikorstans:

clinker tiles or tiles;
plasters;
cement fiber boards;
roofing material (corrugated sheeting, slate).

Characteristics of health materials

Clinker shells or tiles are a practical option for processing a chimney pipe; the fragments on such material are not dirt marks. The advantages of clinker materials also include the aesthetics of the masonry; such dimar goes well with roofing coatings of any type. Varto means the resistance of the tiles to weather conditions, temperature changes, as well as the value of the material. To line the chimney, the whole clinker body is put together, placed on the clinker groove, and special warehouses are put together to rub the seams. Thin, light clinker tiles are ideal for lining high pipes.

Exhaustion of the dimohod on the dakha for additional plaster is characterized:

accessible variety;
forgive installation;
versatility (suitable for any type of coating);
it is possible to implement any color solutions (the plaster can be coated with silicone paste).

Plastering pipes follows the same technology for finishing facade walls. Traditional cement or wood-cement plaster can be used, but a more durable option is the hardening of mineral, silicone, silicate or acrylic plaster. The preparation of a dry surface improves the wear resistance and durability of the processing.

Cement-fiber boards of small format are excellent, resistant to ultraviolet radiation, resistant to temperature changes, and withstand little moisture. This is an environmentally friendly, non-flammable material. For lining the chimney, you can use smooth or structured slabs; the material is available in a wide range of colors.

Since slate is used to cover the roof, the lining of the chimney on the stove must be made from this material. Slate slabs can take the form of an arc, a glaze, a rectangular or an octagonal. The color of this material lies in the ancestry. Choose from graphite, green or purple colors.

An easy and budget option for pipe cutting is to use corrugated sheets. It becomes stagnant because the Viconan covers are made from the same material. The pipe, covered with dahu color, looks aesthetically pleasing.

The elements of the flue for the passage of the chimney, prepared in the factory, have an aesthetic appearance and are easy to install. They are equipped with a steel dimar and can be finished with external cladding from any material, or prepared for independent processing, so that the dimar is in perfect harmony with the coating. The modular steel structure does not need to be prefabricated, it is enough to install it at the place of passage through the roofing pier.

Waterproofing of a smoke pipe on a dakha

When going through a node, it is important to comply with SNiP standards. Leave a gap between the coating elements and the trace, the size of which is regulated by the documents. At the point of passage through the roof, a box (wooden or galvanized metal) is installed, in which the entire open space next to the pipe is filled with non-combustible material - stone or glass wool.

Sealing the flue on the stove can be done using additional means or using unified elements. Just like the fireworks, you can get the title of the comir, and the salary is a piece of black metal, about 40 cm wide, corresponding to the size of the pipe. The collapse of the steel smudge is responsible for the passage of the dimokhid pipe through the roof. In order to open up the dovea, you need to open up:

kut nahilu shilu;
Dimarya's dimensions;
type of trimming of the dimokhod.

When laying the frames from a galvanized sheet, they are connected to each other on an overlay and soldered. Elements made from sheet steel are connected by a hanging standing seam. The joint is sealed with a recumbent seam to seal the joint in the passages of corrugated slabs and tiles. If you want to set the temperature above 30 degrees, install a special beam - a “bumper” - behind the pipe, which will protect the pipe from the flow of rain water and the pressure of snow collection.

The dry elastic apron for the smoke pipe can be purchased:

from a flexible metal strip (lead or aluminum);
Made from galvanized metal with polymer coating.

The apron is installed next to the pipe with two balls along the entire perimeter. The lower ball of the apron is placed under the coating, and the upper one is mounted on top of the covering material. To close the upper ball of the apron, seal it with hydroisolating molten foam and metal profiles.

The upper curved edge of the skin apron must go up to the groove cut along the perimeter of the chimney. After installing the edge into the groove, the stick is filled with polymer sealant or silicone for coating.

Ready for a decision

The laying of the chimney on the stove - to fill the warehouse, in which case the reliability of the heat and waterproofing of the roof is stored. Vikonati vuzol aisle can be done independently, vikorist and carved materials and special planks, or you can install a finished structure, which includes a wide dry apron.

The ready-to-use product on the everyday market is presented in a wide variety of options - models differ in the material and method of preparation, as well as the choice of element that protects water from passing the pipe through the roofing pier. The temperature can be set at 15 to 55 degrees, however, the installation of the chimney on the stove is covered according to the current version of the slope.

To install such a structure in a roofing pier, an opening of the appropriate dimensions must be constructed. Before the construction of the ring, a special silicone is attached to the rubber used to prepare the rubber. Stand between the pipe and the collection passage and fill it with non-flammable insulation. The roofing penetration is used to cover the opening of the passage, after which the penetration can be attached to the covering with screws. To ensure a tight connection, it is recommended to use vicoricated sealants.

When choosing an option to earn money on a daily basis, you can use other ready-made solutions, for example, Master flash roofing penetrations.

It is important to note that the construction of a smoke flue on a stove only needs beauty, which is often correct, but aesthetic storage is not at the forefront here. We need lining first to protect the chimney pipe, both in the middle and in the middle. Next, we will look at the 3 most popular methods of lining a chimney, plus you will find out what is needed and how to lining a pipe with your own hands.

It's time to trim the pipe

There are at least 3 reasons why it is necessary to trim the kidney tubes:

High temperatures on one side and colder air on the other side lead to condensation settling on the inner surface of the pipe. Aloe is not just water, condensation is an aggressive acid cocktail that gradually destroys the pipe. External insulation displaces the dew point into the middle of the insulation unit and turns off condensation;

222222If for the purpose of stimulating the fire there was a vikoristan clinker body or a stainless steel pipe, then these materials are not afraid of weather conditions. If initially without external protection, the rocks begin to dry out, the steel will rust, and the concrete will crack;
In addition to the value of the Dimar, there is also such an important moment as the end of the Dima itself. If the sealing of the sector connecting the pipe with the roofing of the Viconan is poor, then through the river the insulation will become unusable, and the wooden blood system will begin to deteriorate.

Standards and possible processing options

Dimokhіdnaya system, as, however, and increasingly the rule is placed before important and unsafe objects, apparently, all moments of regulation are strictly regulated.

Norms and rules

All the important points that concern the heating, ventilation and air conditioning systems are described in detail in SNiP 01/41/2003. If you want to finish the volume, I will tell you only those norms that apply to the chimney pipes:

The temperature of the thermal insulation and heating materials of the pipe should be 20 ºС higher than the maximum temperature of the pipe, and ideally the pipe should be lined with non-flammable materials;
Sheathing the pipe with metal is allowed, but metal is subject to anti-corrosion protection;

The target pipe is made from the mother wall of the frame, 120 mm in diameter;
Concrete walls are rarely installed in private cabins, but if you choose to install such a pipe, the concrete will be reinforced, heat-resistant and the thickness of the walls is 60 mm;
The minimum gap between the dimar and wooden roofing gratings should be 130 mm;
For ceramic tiles that are not protected by thermal insulation, the gap between the pipe and the wooden structures on the roof should be 250 mm;

How can you trim a dimokhidna pipe?

Illustrations	Recommendations
	Clinker tiles. The clinker thing is better known, but the road. That's why someone lays the pipe out of the original purpose, and faces it with clinker tiles. The building material will withstand the vagaries of the weather, plus such tiles can be used to cover not only the interiors, but also the stoves themselves in the middle of the house.
	Plaster. The option is not as good as clinker tiles, but if you fasten a mesh of plastic or galvanized metal on the surface of the pipe, then the plaster will dry better. Please be careful, carefully plaster the surface with your own hands, standing on the shrine, the building is far from leather.
	Siding. To cover the chimney, you can use any type of siding, or plastic. Both metal and cement siding are, however, well suited for cladding chimneys. Moreover, this material is mounted on a grating, which means it can be placed under a new insulating material.
	Corrugated sheet. The expansion of flues with corrugated sheets is one of the most widespread. This option is especially good in harmony with metal tiles. If you choose the color, then the steel shades on the roofs made of slate, ondulin or ceramic tiles will also fit into the decorative design.
	Bitumen shingles. Since the material is prepared from added bitumen, it is strictly prohibited to spray it onto the existing chimney. In this case, you may only need to install a decorative cocoon made of embedded plywood around the pipe, onto which the bituminous shingles are placed. This option is only suitable for sandwich pipes equipped with a spark arrestor head.

Three options for independent management of the fireplace

There are three options where a person without special preparation can do everything with their own hands. The first option is to seal the whole pipes, which does not require lining, but you will need to seal the pipe with the coating. Next comes the frame version and the option with ready-made factory solutions.

Option No. 1: Bladed pipe

Waterproofing of the pipe may be carried out before laying the roofing material. Once the covers are already lying down, you will have to take them apart frequently. The entire perimeter is removed by 50-70 cm, plus it is necessary to remove the lower part of the covering from the pipe to the edge of the slope.

For materials we need a wall metal profile. You can bend it from galvanization with your own hands or buy a ready-made one. The profile consists of 4 parts, which are superimposed one on one during installation.

An external apron for a pipe is easier to apply, and it is best to apply it together with the coating material, so it is easier to choose the color.

This is the name given to the crib because it is a sheet of roofing material with sides curved at the sides. The pipe is laid from the lower part of the pipe to the edge of the sheath and placed under the lower section of the wall profile.

In order to hermetically connect the integral pipe with the wall profile, we need to cut a groove approximately 20-30 mm deep on the pipe with a grinder. At this groove, the curved edge of the profile is inserted.

Next, we insert the curved edge of the profile into the groove and fill the groove with sealant. After that, all 4 parts of the profile and the bed are fixed at the bottom with self-tapping screws and press washers. Roofing material is laid on top of this structure.

The upper apron is attached to the pipe with screws along the entire perimeter. It is necessary to extend onto the pipe no less than 100 mm. The lower part of the apron is most often prepared from soft bitumen materials. They are pressed around the corrugated cover and glued to the cover with mastic or special glue.

The scheme works approximately like this: the main part is to install the upper apron out of the pipe, if this barrier does not fit its purpose and the water has sunk under the coating, then select the wall profile. water flows down the drain.

Option No. 2: installation to the frame

This method is well suited for insulating and lining the chimney with corrugated sheets, siding and other similar materials. For the cob, the base is sheathed with a metal profile, and then corrugated sheeting is fastened onto it. The frame is easier to work with a wall profile under plasterboard, wider, lower frame.

It is difficult to work with a metal profile, but if you are not able to do it yourself, you can use a frame made of wooden blocks. True, the wooden frame will need to be thoroughly treated with fire retardants, antiseptics and waterproofing agents. Between the slats of the frame, slabs of high-grade mineral wool are placed to insulate the pipe.

Corrugated sheeting or any other sheet material is screwed to the frame slats with screws and press washers. The whole structure is completed with a parasol for protection from the board.

Option No. 3: solution ready

There are no daily problems caused by round pipes. Special little aprons are produced for them. To be sure, you can install such an apron in a maximum of a few years. Photo instructions for installing such an apron are below.

Select the required pipe diameter and make a hole in the soft polymer cone;
Pull the cone onto the pipe, the contact will be tight;
Press the lower ring of soft metal into a covering shape;
Thickly coat the perimeter under the ring with sealants;
Screw the ring to the roofing material with screws and press washers.

obustroeno.com

Video for the sample of the fire
Sew up the pipes over the roof
Materials and methods of sewing
Lining and coverings on pipes
Improvement of Dimokhods

De dahu best roztashuvati trumpet

The better it is, the better it is. The ideal place is konik, the best point. Firstly, the traction is maximum, in another way, waterproofing is simpler and more reliable. It is also necessary to ensure that beyond the basket of spoiled dimars, this may be the greatest. This does not make sense and complicates its design.

A masterpiece of the Renaissance era, the Chateau de Chambord on the Loire is crowned with immaculate figures of a very striking form. Nina is so timid not to take the word from France.

The shape of the pipe can be seen from aerodynamics. Buckets, which are installed on the head of the pipe, slightly reduce the draft. Therefore, the typical dimaris, since the stinks are not dissolved separately, are raised above the fire pit. In addition, any protrusions of the pipe casing, located at the upper part, will ensure normal ventilation. Ideally, the pipe should not sound hot and the hose should not be too big or too low.

To save traction on the head of the pipe, it is necessary to use a great expansion.

There is often a need to install a single ventilation pipe above the roof. For example, ventilation of the sewer riser should be better placed around the area to prevent overflow and return draft of wind flows from emergency ventilation. In this case, the most rational solutions would be not to remove solid masonry from the walls, but rather to use a standard plastic ventilation or metal outlet, which is included with most current types of roofing systems.

Standard ventilation outlets on the roof are reliable, airtight and aesthetic. Provide good protection from atmospheric fallout, adjustable in height. For most types of roofing, the shortest option is for single channels.

Sealing of pipes on a dakha

Before the vertical pipe exits onto the roof, there is a sealed, continuous and technically head processing stage.

Just now, government regulations ordered that work be done directly on the roof of the expanded solid masonry in order to place a covering material underneath it that would seal the joint. Metal was tamped under the protrusion of the masonry to ensure the tightness of the connection. The part of the pipe above the roof was heavy and not very attractive.

Now, with the advent of new effective waterproofing technologies and materials, it is not difficult to work on expanding masonry. The target pipe can be laid straight, without ledges.

Regardless of the type of roofing, all undercoating linings or waterproofing materials must be cast onto the entire masonry before installation of the roofing coating. It is not possible to burn on dimara bituminous materials; it is necessary to use non-flammable elastic strips.

Next to the pipe, blow a stale apron. It can be made from galvanized metal coated with polymer. If necessary, place a sealing stitch under the apron. Such stitches can be added to a set with covers, and in a different color. They are manufactured on the basis of aluminum foil with a self-adhesive ball made of bitumen-polymer materials, threaded from lead plates. For aprons of smoke flues, non-flammable materials should be used.

The best solution is to use a metal apron and a rubber sealing strip. Since there is no groove in the treasure from the back, it is possible to cut a hole in the treasure and place the metal at the burial. I don't want it to be a problem.

At the lower and side parts of the pipe, the apron must lie above the coating. But the animal, of course, needs to be kept under cover.

In any way, the apron must be sealed before laying. For these purposes, an insightful silicone sealant will work wonders. Also, don’t forget to apply sealant to the seam.

Sew up the pipes over the roof

Sewing is required for the following types:

The masonry of the viconan has an unclear purpose, ensuring that it is not exposed to atmospheric tides.
There is no normal draft at a high pipe height. Place a ball of insulating material under the stitching at this end. For dimars, use non-flammable basalt wool.
If it is possible to place only light plastic flames on the walls, there is no need for a complete deposit. You can build a metal frame, run communications in the middle of it, and sheathe the outside, insulating it first.
Aesthetic merchandising.

Materials and methods of sewing

Before sewing, it is necessary to install a frame for fastening the material and installing the insulation. The frame can be made from an antiseptic wooden block 4x4, 5x5 cm or metal. For chimneys, the frame must be made only from a metal profile, such as plasterboard, which is being cured. The dowels are also made of metal, not plastic.
It is easy to work with a galvanized profile for gypsum plasterboards. The space between the profiles has better insulation.
The cheapest and most accurate material for sewing is galvanized, polymer-coated metal. Flat chi profiling. With a large size of sheets, the profile is thinner than the profiling.
Metal covering of the dimokhod: cheap, cheerful and neat. Fasten the metal with hex head screws and a rubber gasket.
The lining can be covered with siding. True, only a few ventilation pipes, fragments of flammable wine.
The pipe on the roof made of clay tiles should be covered with the same material. The frame is rolled, covered with OSB or DSP, and the tiles are glued to it. Also - not for fires due to flammability.

Lining and coverings on pipes

For finishing, the following method is used, such as pipe lining. In this case, natural or artificial stone is used, but in our minds this method is not very practical. On the right is that from an unclear purpose the veneer can be sealed (along with the top ball of ceramics), sealing the cover. And a good one looks beautiful, there’s nothing to cover it up. The heavy varnish lining, together with the adhesive warehouse, is fixed with metal slabs: fastened with metal arches along the edges or with dowel bolts directly through the stone slabs.

To protect against atmospheric fallout and birds, place dry bags on the pipe heads. The scoop absorbs traction, so its size is not due to being too large, and from the top of the pipe to the bottom of the scoop it should not be less than 15 cm.

The shape and material of the bag - on the right, the taste and surface of hamman. You can choose to paint the surface from primary galvanized metal or create a folding architectural and artistic composition between the middle and the stone with a unique weather vane on top.

To prevent communication from the penetration of birds, place a dry mesh in the openings and protect them. Grati to make a mistake for the birds.

Improvement of Dimokhods

The improvement of the fireplace on the road may be carried out in accordance with the exact same standards as before. Gases that come out of chimneys may have a higher temperature - these are stoves and fireplace pipes, as well as the flue pipes of boilers that operate on solid or rare fire. Modern gas boilers, especially condensing ones, have gas cooling plates so that they can be installed safely from the outside. However, for all types of dimars there is sufficient traction.

The head should be taken care of before the installation of the smoke flues - drying without non-combustible materials.

If there are differences in the expansion “in the frame” of the ventilation ducts, it is necessary to replace them with a sealed hood.

Stainless steel chimneys with internal thermal insulation, which are widely used today, can be placed on the roof without integral masonry, vicor and metal apron.

The ways to obtain and process pipes on the stove are varied and lie richly in something like the relishes and capabilities of the master's booth. What is important for pipes is the tightness of the connection and the presence of carbon draft. Let us repeat that the opposite norms when administering dimars must be strictly adhered to.

goodkrovlya.com

Materials that are ideal for decoration

Pour onto the outer part of the dimar:

wash away the weather, and the wind itself will blow it, the fall will be manifested in any way, the sleepiness will be mentioned;
a sharp change in temperature readings;
The operating temperature is high, due to which the dimokhid is compromised for its functionality.

Dimokhid is susceptible to sudden changes in temperature. Also, the operating temperature and temperature readings of the excess medium vary greatly in order to allow the condensation to settle. In order to eliminate these ruined inheritances, it is necessary to transfer the insulation of the outer part of the chimney using additional cladding materials.

When choosing a material for the lining work of the outer part of the chimney, fakhivtsi recommend using:

resistance of the material to unfriendly Dovkill officials;
the severity of the operational period;
the new look of the material and the color of its design.

The material for insulating the outer part of the chimney can harmoniously complement the flow. It is also recommended to install such work before installing the roof. This is to allow mechanical problems and congestion to disappear.
When designing designer products and insulation work, clinker parts, ceramic tiles, decorative mixes for plaster, cement fiber boards, and profiled sheets are most often used for insulation.

The power of the clinker target for finishing

The most practical and simplest option for modern design is viscous clinker or ceramic tiles. They do not waste their decorative powers through many fates. In addition, the following design:

suitable for any type of roofing material;
allows you to create an aesthetic external look;
resistance to unfavorable factors such as excessive heat and sudden temperature changes;
even mіtsne and vitrivale.

Clinker can be used for low-rise gardens in the country. For tall pipes, clinker tiles are a wonderful insulation option. This material is the same as the whole. It just fits and creates the decoration of the fireplace.

Plaster is a universal material for decoration

Plastering the chimney is also often painted by both professional gardeners and ordinary summer residents. Modern plastering compounds are so popular due to their high technological characteristics:

Versatility. The plaster is ideally suited to any coating materials;
the creation of Dimara be-yakkoloru. The plastering element can be coated with any kind of mortar;
easy to apply. You can work out the skin without using a special tool or equipment;
at an affordable price. Plaster is an attractive material for its price.

The plastering work of the chimney is finished in the same way as the plastering of the façade was done. Today you can add different types of plaster: mineral, silicate or silicone, acrylic, wax-cement.
To extend the operational period, the plaster is coated with a special farb.

Vikoristannya of cement-fiber boards and slates

Cement fiber boards are produced in small sizes. The material is resistant to sleep changes, temperature changes, moisture, and has little moisture. In addition, the current product is resistant to heat and even high temperatures, and is an environmentally friendly and completely safe material for people of extreme conditions.
Cement-fiber boards can be added in different structures, with a smooth surface, in different colors.
In this case, if the veneer is covered with a special slate, the outer part of the interior must be decorated with the same material. Shale worms can be found in the vicinity of arcs, glazes and rectangular plants. Natural material is sold in products such as nature created.

Corrugated sheeting, as cladding for dimara

Corrugated sheeting is another finishing option. It is used only if the covering is made from a profiled sheet. Dimar, the design behind additional corrugated sheets, has a wonderful modern look, enhances the nobility. This material is of great value. It is durable, flexible and resistant to temperature changes. This is why it is also used for coating the coating and smoke.

Ready design elements

Ready-made structures for creating an aesthetically pleasing appearance and insulation, which can be added to a hardware store, are easy to install and have a modern appearance. This is a complex structure, which includes a steel flue gas channel and external finishing. It is also possible to add finishing touches to the finished structure so that it fits harmoniously with the roofing. Such a modular device is a ready-made device that can be easily mounted on roof surfaces.

Installation of waterproofing materials

Between the coating material and the dimar, due to regulatory requirements, the space that needs to be insulated is lost. As a rule, many summer residents in such places install a wooden box, the interior space of which is filled with non-combustible material. This is the way to remember it: kam'yana chi flask vata.
Sealing robots include the installation of a chamber, which is installed next to the smoker. This is a special improvement for the flue pipe on the dakha, as an element of the burning system, which is constructed with the help of metal smudges, the width of which can be up to 40 cm. When installing the chamber in the obligatory order, measure the cut of the slope of the slope, the size of the pipe, etc. and the materials will be vikoristan. The elements of the comic are combined in different ways. This includes fixation using a soldering iron, welding and fastening elements.
Golovna, so that the structure is perfect and hermetically sealed. In case of great stress, the experts recommend installing an additional bumper, which will become a reliable protector during periods of heavy rainfall.
Another option for sealing the roof is to install an apron. It is installed from flexible materials, usually from lead or aluminum strips. This design is installed around the perimeter of the fireplace in two balls, in which the lower edge is placed along the covering, and the upper edge is fixed on the surface. Installation of the apron is carried out using cured hydroisolating molten material, which is attached to special profile strips. All sticks and fastenings are sealed with a special sealant or silicone glue for these types of robots.
Before insulation of the fire on the dahu varto, approach with full reliability. Even these robots not only reduce heat loss, but also extend the operating period of the heater. The effective and reliable protection of the element of the scorching system allows you to protect this kind of wasteful influx of excess substance.

idachi.ru

Box for dimohoda on dahu

In advance, we need to know about the entrance door. By sealing and preventing materials from coming into contact with the hot pipe, the box is made to work. This design is made of ceramics, asbestos or metal, which prevents pipes and roofs from sticking out. Sometimes it’s like a box to break the ceiling system for the smoke flue. In this case the box will be made of wood. Design diagram of the baby:

To install a box made of non-combustible material, it is necessary to prepare an opening for the pipe to come out. The box itself is bought and prepared independently. The size of the box should be based on the diameter of the pipe - between the walls of the box and the pipe, the minimum distance should be 15 cm. We then follow the algorithm:

A box is inserted into the opening in such a way that its upper edge is aligned with the edge
Insert the animal through the box or lay out the pipe
The middle of the box is glued with waterproofing foam along the walls in such a way that the closures open, and the edges can be glued to the pipe.
The edges of the insulation are hermetically glued to the pipe. Vikoristovat vynestiyky sealant and reinforced stitch
Insulation material is laid in the middle - expanded clay, stone wool, etc. This creates thermal insulation. Do not stuff too tightly to prevent air circulation.

Next comes the external processing of the chimney.

Sealing the smoke flue on the dakha

Installation of the chimney on the stove, ideally, can be completed before the roofing is laid. In this way you will be able to do everything correctly. If you already have the coating ready and covered, you will have to unscrew the sheets near the pipe.

The best place to remove the pipe is 50-70 cm from the top, between the edges. Whose decision is not to be confused.

Otherwise, the pipe is pulled through the bunk, otherwise the integrity of the load-bearing beam of the frame is destroyed, which weakens the structure of the roof. So, try to put the pipe on the side.

To seal the straight-cut flame sealant, the following elements are used:

pechnoeremeslo.ru

What an unclear installation can lead to

Most often, before the refurbishment, the furnace specialist or installer of the gas or electric heater does not turn on the work on the chimney. It is important to note that the passage of the smoke outlet pipe through the walls is laid at the work-life stage, or the housekeeper installs the smoke outlet self-tightening. The simplicity of such work, as it appears, provokes the rulers to become convinced of the rise of professional masters-protectors. The stench is not ignored, any serious negative effects can be caused by an unclear result of the chimney on the roof. Commonly encountered problems:

Not only fires from stoves, fireplaces and other solid burning devices are raised above the stove. Exhaust pipes from gas heaters, as well as ventilation pipes, are routed there. When installing them, use the same methods as for stove pipes.

Height of the pipe and the passage in the roof

Dimar on the surface can be placed correctly, only if the place where the pipe is brought out through the roof is chosen correctly. This factor can influence the proper functioning of the scorching system. To ensure proper safety during installation, it is necessary to comply with the necessary safety precautions, as well as relevant rules and regulations. Main points of plaster:

The main problem with pipe plating is that when gas or products are passed through, the temperature of the structure rises, and this can lead to the use of materials for the production of coating elements or the blood system. .

Gnuchka passage for a round dimar

Please note that a private household has to deal with the cleaning of smoke and ventilation pipes around the cross-section. How can the dimar be installed through the elements in order to further ensure the sealing of the passage? For this purpose, a special design is needed - an elastic passage element for the covering. This product is made from special silicone or gum. Behind the form is a virva with wide brims, round or square. These fields are called aprons. The elastic passage element, due to the flexible nature of the material, can take any configuration. This allows you to stagnate on the dakha with whatever the cut of the skhyl and the final coverings. The material from which it is produced must withstand maximum low and high temperatures, as well as resistance to dovkill. Elastic penetrations are available in different colors and configurations.

When choosing which penetration to add, you need to focus on the diameter of the dimer and the color of the finishing coating. Universal filters are available, similar to a pyramid step, and will suit any pipe diameter. The size is adjusted to an additional knife, which is used to cut the passage to the required level.

Installing an elastic apron on the roof is easy. To do this, you need to apply it to the fire, press the animal with a metal stake, then open it under the self-tapping screws, apply a non-corrosive sealant to the sealing area and screw it in using a screwdriver or a screwdriver.

For roofing with extremely steep corners, it is necessary to assemble a special type of penetration with a fixed corner and mounting a pressure flange.

Hard metal flow pipe

For lining flues, you can install another type of flow pipes for pipes of a round configuration - a flow pipe made from metal. You should avoid this situation if it is necessary to cover the passage of the chimney pipe across the roof without relief. Such ready-made products from galvanized or preformed steel are prepared before fixing the stones.

To decorate, you need to dry this cut of your roof. The installation of such a device follows the following procedure:

In some cases, it is recommended to use another method. The essence of this is that it is necessary to create a hole in the pass-through box of the dimochoid pipe, surround the area with a special insulating material, such as basalt wool, and after that the entire structure is laid in the covering.

Refinishing of straight-cut diodes

Dimar stove or fireplace chimney, as a rule, is shaped and has a square or rectangular shape. In this case, it is necessary to use another method to glaze the coating.

If the masonry of fireworks reaches the roof, it is necessary to cut an opening of the same size with a tolerance of approximately 6 cm. In addition, a pipe will be installed above the hole. Regardless of the fact that the heater continuously streams heat into the middle of the fire, this pipe needs to be lined with asbestos sheets. This is to protect blood from high temperatures.

On the part of the solid pipe that protrudes, waterproofing is secured with a metal profile on an aluminum lining, and its lower edge is secured before covering with additional sealant. Next, the unprotected waterproofing of the flue on the stove is covered with a special decorative apron. This means that all parts are mounted on the roof, making the transition natural and protected from spills.

Properly lining the pipes does not impair the appearance of the coating, prevents the penetration of moisture and is completely safe from other problems. The improvement of the chimney on the stove is dependent on the design of the roof and the wall of the house.

Install the dimar - the robot is very reliable and foldable. It is necessary to think through all stages of installation in advance and consult a specialist.

proroofer.ru

Improving the flue: choice of materials

Before the negative factors that come into play, enter:

atmospheric influx (wind, fall, ultraviolet exposure);
Dovkilla temperature difference;
high temperature operating conditions.

To cover the protruding part of the pipe, various materials are used. When selecting a trace, select it:

resistance to external factors; wear resistance;
the new look and color scheme (similar to the roofing or finished walls).

The favor of the smoke mover on the dakha most often coincides with the vikorstans:

clinker tiles or tiles;
plasters;
cement fiber boards;
roofing material (corrugated sheeting, slate).

Characteristics of health materials

Exhaustion of the dimohod on the dakha for additional plaster is characterized:

accessible variety;
forgive installation;
versatility (suitable for any type of coating);
it is possible to implement any color solutions (the plaster can be coated with silicone paste).

Waterproofing of a smoke pipe on a dakha

kut nahilu shilu;
Dimarya's dimensions;
type of trimming of the dimokhod.

The dry elastic apron for the smoke pipe can be purchased:

from a flexible metal strip (lead or aluminum);
Made from galvanized metal with polymer coating.

Ready for a decision

The laying of the chimney on the stove is necessary to ensure the reliability of the heat and waterproofing of the roof. Vikonati vuzol aisle can be done independently, vikorist and carved materials and special planks, or you can install a finished structure, which includes a wide dry apron.

When choosing an option to earn money on a daily basis, you can use other ready-made solutions, for example, Master flash roofing penetrations.

11956 0 0

Independent modification of the smokehouse on the dakha in 3 options

It's time to trim the pipe

There are at least 3 reasons why it is necessary to trim the kidney tubes:

High temperatures on one side and colder air on the other side lead to condensation settling on the inner surface of the pipe. Aloe is not just water, condensation is an aggressive acid cocktail that gradually destroys the pipe. External insulation displaces the dew point into the middle of the insulation unit and turns off condensation;

222222If for the purpose of stimulating the fire there was a vikoristan clinker body or a stainless steel pipe, then these materials are not afraid of weather conditions. If initially without external protection, the rocks begin to dry out, the steel will rust, and the concrete will crack;
In addition to the value of the Dimar, there is also such an important moment as the end of the Dima itself. If the sealing of the sector connecting the pipe with the roofing of the Viconan is poor, then through the river the insulation will become unusable, and the wooden blood system will begin to deteriorate.

Standards and possible processing options

Dimokhіdnaya system, as, however, and increasingly the rule is placed before important and unsafe objects, apparently, all moments of regulation are strictly regulated.

Norms and rules

The temperature of the thermal insulation and heating materials of the pipe should be 20 ºС higher than the maximum temperature of the pipe, and ideally the pipe should be lined with non-flammable materials;
Sheathing the pipe with metal is allowed, but metal is subject to anti-corrosion protection;
The target pipe is made from the mother wall of the frame, 120 mm in diameter;
Concrete walls are rarely installed in private cabins, but if you choose to install such a pipe, the concrete will be reinforced, heat-resistant and the thickness of the walls is 60 mm;
The minimum gap between the dimar and wooden roofing gratings should be 130 mm;
For ceramic tiles that are not protected by thermal insulation, the gap between the pipe and the wooden structures on the roof should be 250 mm;

How can you trim a dimokhidna pipe?

Illustrations	Recommendations
	Clinker tiles. The clinker thing is better known, but the road. That's why someone lays the pipe out of the original purpose, and faces it with clinker tiles. The building material will withstand the vagaries of the weather, plus such tiles can be used to cover not only the interiors, but also the stoves themselves in the middle of the house.
	Plaster. The option is not as good as clinker tiles, but if you fasten a mesh of plastic or galvanized metal on the surface of the pipe, then the plaster will dry better. Please be careful, carefully plaster the surface with your own hands, standing on the shrine, the building is far from leather.
	Siding. To cover the chimney, you can use any type of siding, or plastic. Both metal and cement siding are, however, well suited for cladding chimneys. Moreover, this material is mounted on a grating, which means it can be placed under a new insulating material.
	Corrugated sheet. The expansion of flues with corrugated sheets is one of the most widespread. This option is especially good in harmony with metal tiles. If you choose the color, then the steel shades on the roofs made of slate, ondulin or ceramic tiles will also fit into the decorative design.
	Bitumen shingles. Since the material is prepared from added bitumen, it is strictly prohibited to spray it onto the existing chimney. In this case, you may only need to install a decorative cocoon made of embedded plywood around the pipe, onto which the bituminous shingles are placed. This option is only suitable for sandwich pipes equipped with a spark arrestor head.

Three options for independent management of the fireplace

Option No. 1: Bladed pipe

An external apron for a pipe is easier to apply, and it is best to apply it together with the coating material, so it is easier to choose the color.

Option No. 2: installation to the frame

Corrugated sheeting or any other sheet material is screwed to the frame slats with screws and press washers. The whole structure is completed with a parasol for protection from the board.

Option No. 3: solution ready

Select the required pipe diameter and make a hole in the soft polymer cone;
Pull the cone onto the pipe, the contact will be tight;
Press the lower ring of soft metal into a covering shape;
Thickly coat the perimeter under the ring with sealants;
Screw the ring to the roofing material with screws and press washers.

Visnovok

It is problematic to report on all the methods of processing kidney pipes in one publication, so I tried to select for you the 3 best options available to the home master. If after reading the article and watching the video in this article you have lost your food, write a comment, we will try to help.

Vikonati treatment of the chimney is not so much about reducing the garish appearance of your dahu as it is about the need to carry out a complete protection of all the spores without a friendly influx of too much middle ground. Wind, fall, and birds can cause damage to the normal operation of the furnace.

Ale, on the other hand, dakh and dimar above her - this is a kind of manifestation of your everyday life in this world. Made and prepared when the smoke is added to the design. The axis of yak comes out of harmony “I am guilty” and “I want.”

Harmony of functionality and design

Improvement of the flue can be divided into three independent stages:

fertilization in the middle - until the exit to the mountain;
isolation in the middle - between the walk and the exit to the roads, that
zozdoblennya zovni – already on dahu.

The most important stage is the remaining one.

Here we are talking about the influx of external factors into production, and here:

steady influx of Dovkill;
the temperature in the middle of the fire is high;
The current temperature difference will last for a short period of an hour.

Stages of robotic work

When carrying out the processing of the fire, the entire work is focused on three interconnected elements of the flue:

the base is the area without the middle of the pipe with the flat surface; The main goal here is to ensure the complete tightness of the stick and the inadmissibility of penetration into the middle of the world and smittya;
the very body of the pipe is high - here the main emphasis is on heat conservation, reliability, and a fresh, modern appearance;
out of the way - remembering about those that “the end is the right end”, we do not forget about the aesthetic benefit of nutrition, but still the headache here is to protect the opening of the chimney from the ingress of board water and washings of the call and in no way harm you zi.

Materials

If we are talking about materials, then we can take into account one very simple point that allows you to turn the entire work into an easy excursion on the surface, but in one mind:

you carefully outlined the parameters of your furnace and the pipes on the mountain behind;
Have you monitored the market for everyday materials in the smoke flue manufacturing sector;

and found that there are already excellent ready-made structures - metals (photos “B”, “D” and “E”), polymers (photo “A”), which solve the problem in a complex and ensure the molding and protection of all three constructive elementa dimarya zovni;
This prevents you, mindful of the future, from simply expanding the dimensions of your fireplace according to the dimensions of the proposed structures;
This will be the shortest and ideal option for lining a chimney, and, looking at the butts, let’s say, more directly and more importantly, this is the best option for the construction of this type of work;

Before the finished structure, instructions for installation and all fastenings are supplied, which allows you to give the main respect to the surface, and not to the smoker;
The problem only lies in one thing - the correct arrangement of dimensions.

Since your share is the improvement of the skin from three warehouses, then your order:

traditional plaster, in addition to the characteristics of resistance to elevated temperatures, and, more importantly, to constant and sudden drops;

stone– material that is often vikorized;
aim- and this has long “settled” in the Dimars;
ceramics, which is famous for its resilience until the influx of calls.

Norms and rules

All work related to work with smoke is regulated by the “Business Standards and Rules” (SNiP).

The main provisions of these rules, numbered 41-01-2003 (“Scorching, ventilation and air conditioning”), which apply to the processing of flues:

all hot surfaces require insulation, in which case the temperature of the insulation that is being cured is at least 20 degrees lower than the transferred temperature of the point of contact with the surface;
all vicorized materials of the guilty mother of the anti-corrosion authorities;
If the pipe is formed from a target, its thickness may be 120 mm or more;

If for the production of pipes vicorized concrete is used, then the thickness is 60 mm;
standards allow for the production of pre-fabricated asbestos-cement or stainless steel, however, since coals cannot be heated;
the protection of the pipe exits is obligatory, in the form of all sorts of parasols and deflectors, but it is unacceptable that this protection would be the least likely to cross the pipe exit and thus change the draft;
the gap between the pipe body and flammable elements of the coating must be at least 130 mm;

If the pipe is ceramic and does not have vikorist insulation, then the length will increase to 250 mm;
Insulation of the space between pipes and non-flammable roofing materials must always be carried out with non-combustible materials.

Hide works

For starters, let’s look at the hidden scheme of future robots.

Scheme

The entire work consists of four elements:

A – Dim’s trumpet, as the “blame” of all people;
B - bunk stitch, applied to the tiles and repeating the profile;

C – metal profile;
D-elastic stitch, placed under the tiles.

Corisna is pleased!
It is necessary to understand that the methods of lining the smoke flue and dahu are of great strength.
All stinks have one meaning - reliable sealing of the stick.
And the axis of the road reaching this mark can be completely disrupted. Therefore, first of all, start working, it is very important to “play through” the entire algorithm of the robot.

Diemo

The work is applicable to the successive victor of the next generation:

First, the entire pipe is carefully lined with roofing felt along the entire perimeter;
then, along the entire perimeter of the pipe to fix the insulator, the installation of the sheathing is completed, as a continuation of the sheathing of the entire roof, then lay the tiles on it;
We lay tiles on the grating - trimming the chimney for the beast;

Next, we measure all the lining material and prepare it for installation;
Next, starting from the bottom, we fix it on the surface of the pipe;
As a final step, all sticks are carefully sealed with sealant.

Shortcomings on the butts

And now a little bit of a good critical look at other options.

In other words, it’s time to marvel, analyze and work:

photo “C” - here, it seems, the size of the facing surface, as we go on the road, is too small, which will inevitably lead to the vlog getting into the middle; (Div. also statue.)

photo “B” - here everything could have been done, in principle, more accurately and without dragging the metal lining up to the top;
Photo “A” - here the surface of the stick is also very small, and even worse - an unacceptably closed pipe outlet, which may cause problems with draft.

Corisna is pleased!
If your dimar vikonaniy has the appearance of a round pipe, then for the sake of increasing respect for the so-called Master Flush casing.
Working with them is miraculously illustrated by the little thing that goes into it: ready for work, inserting the pipe, leveling, fixing it on the surface with sealant and not forgetting about the screws.
Often this innovative approach may appear simply as a surprise.

Facing in the adjacent

If we are talking about the lining of the stove below, then it is suitable for the fire lining of the stove - the same material and the same features:

tsegla, stone, plaster;

marginal resistance to high temperatures;
but it is also suitable and has high designer values.

Visnovki

If you have chosen the option of lining the skin of the warehouse flue separately, then start by insulating the pipe first, then move on to the outlet, then close the exit, and finally arrange the design of the pipe itself. This sequence will be reminded to you once again by the additional video in this article.

An invisible part of today's booths is the pipe on the stove. There are at least three types of such structures available for living cabins: smoke (scorching stoves, stoves, fireplaces), ventilation (natural ventilation of areas - kitchen, bathrooms, basement areas, etc.) and ventilation plumbing risers. When probing pipes on the stove, seal the coating and vertical surfaces, protect the channel and the material of the structure from atmospheric fall and, if necessary, insulate the chimney. The aesthetic design of these exits is also important. How to make a pipe for a house, how to properly sheathe it and protect it - the axis of the first nutrition, how to set up the people who have gathered to do the cleaning of their house.

How can I install the pipe on my car in the most beautiful way? The optimal place for such a design on the back is a conic as the best point. Here there will be maximum traction, and it is much simpler and more reliable to apply waterproofing. The farther away from the conic there is dimar, the higher the value of the buti. You can see the shape of the pipe dahu varto from the side of the aerodynamic components. The caps installed on the head of the structure reduce the draft. So, it’s not just the dimaris who have grown up on the ground and are trying to lift their hats. It is also important to understand that any parts of the pipe casing that protrude will interfere with the normal ventilation process. Those who are most interested in the sound design of the burner, in which the hood is not too low or too big.

To ensure proper gas traction, the pipe head should not be subjected to large expansions. When it is necessary to install a single ventilation outlet above the roof, it is most rational not to remove the whole masonry on the walls, but to use standard ventilation plastic or a metal outlet, which is included in the package of most daily I saw the roof.

Important! The original ventilation outlets available on the market today are reliable, guarantee tightness and provide an improved appearance. The design ensures protection from falls and can be adjusted in height. For single channels, most types of coatings are ideally suited.

Sealing of pipes on a dakha

When cleaning the coating around the pipe on the stove, it is necessary to finish it very carefully. The outlet of the vertical pipe at the bottom is sealed. With the new technologies of waterproofing, the entire pipe can be laid absolutely straight without any ledges. Regardless of the type of roofing, all linings under it or materials for waterproofing must be placed on concrete masonry before installing the covering. Bituminous materials do not burn on fire, so it is necessary to use elastic, non-flammable stitches.

A stale apron is laid around the pipe. It can be prepared from galvanized metal with coatings from a polymer warehouse. If necessary, a small sealing stitch is laid under the apron. These stitches can be added simultaneously to the coating or coating, their color palette is wide. The smells are prepared on the basis of aluminum foil, which contains a self-adhesive ball of polymer-bitumen materials. The optimal material for a smoker's apron would be metal-lined and hermetically sealed string. On the side and bottom parts of the structure, the apron should be spread over the covering covering, the animal needs to be placed under the covering. Regardless of the method of fastening, it is necessary to seal the contact of the apron before laying. For which good silicone sealant is suitable.

Materials and methods of sewing pipes

How to bypass the pipe on the stove, what is better than the frame and how to reliably fasten materials in this situation is a very serious matter. Sewing of the structure is required in the following cases:

With a high pipe height, there is no normal draft. In this situation, before sewing, it is necessary to place a ball of insulating material, forcing the flues to embed basalt wool through its insulation.
The masonry of viconan with the aim of low bones means that the material will crumble under the influence of weather conditions.
If it is possible to remove the entire pipe, remove the light plastic pipe. A metal frame is constructed, communications are passed through it, and everything else is first sheathed with insulation.
Aesthetic merchandising.

To sew such structures with vikorist, use different materials and methods, which are discussed in the report:

The cheapest and most accurate material for lining today is galvanized metal coated with polymer.
It is easy to install galvanized profiles for gypsum plasterboards by hand; insulation is easily placed in the gaps between the profiles.
For any type of lining, it is necessary to create a frame to secure the material and install insulation. You can make such a frame from a wooden beam, coated in front with an antiseptic, or metal. The frame for the flues is made from a metal profile, and the dowels are also made from metal.
Sheathing with metal for the chimney is a cheap and neat option.
Some pipes are covered with siding, otherwise there is no ventilation.
On a roof made of clay tiles, the pipe should be lined with the same material. This solution is also not suitable for flammable ingredients.

Important! Vikonans adhere to all standards of contact with metal tile pipes even more important. Bypassing the pipe with metal tiles is responsible for two main tasks: preventing water from entering the living area and properly removing the water that flows down the drain.

Lining and coverings on pipes

For lining pipes, piece or natural stone is often used. Aloe is not always practical, because such a coating can easily be removed from an unclear purpose, and as a whole it looks very pleasant. The cream of the adhesive warehouse is fixed with the utmost importance of facing it with the help of metal - fastened with metal staples from the edges or dowels directly through the stone slabs.

To protect against debris and debris, special buckets are placed on the pipe heads. This design is designed to reduce traction, so the dimensions of the pipes are not too large, less than 15 cm from the bottom of the cornice to the top of the pipe will not work. The materials and shape of the packages vary. Communications from birds are also protected by placing them in the openings of dry gates or nets.

Important! If the liquid is removed from the ventilation ducts, it must be removed from the fire pit.

It is necessary to maintain smoke in the air in compliance with all relevant standards. The gases that come out of the chimneys may cause a higher temperature, such as fireplace and stove pipes, flue pipes operating on rare or solid fire boilers. Many modern gas boilers, especially those with condensation boilers, have gas cooling systems so that they can remain completely safe from the point of view of sunbathing. But for all types of smokers, the presence of sufficient traction is obvious. Most often, stainless steel chimneys with thermal insulation in the middle can be installed on the roof without integral masonry using a metal apron.

The correct choice of lining material for a pipe depends on the quality of the roofing coating - metal tile coatings, like all other materials, have their own nuances. If you have never had time to install pipes on the pipes, they have not been lined or sewn up, then it is better in this situation to quickly seek the services of professionals to achieve the optimal result of your life.