Bicycle flower pots with hand. Meister class. Do-it-yourself bicycle - a treasure chest of master-classes made from vykoriztannyi resin materials Do-it-yourself jute bicycle
A bicycle with forget-me-nots for mom. Master-class from Pokrov's photos.
DIY gift for Kohana Matusya.
Sinotenko Alina, 11 roki, the unification of the “Handbox” of the MBU DO Lisnivskyi Budynok of children’s creativity will begin.
Kerivnyk: teacher of preschool education Novichkova Tamara Oleksandrivna MBU DO Lisnivsky Budynok of children's creativity.
Description of the robot: When preparing the product, various technologies were used: beaded weaving, work with paper and non-proprietary material. Meister is a classy person who would like to please his loved ones with a gift he made with his own hands.
Purpose: gift, decoration for the Internet.
Purpose: preparing a gift for mom using beads and paper.
Zavdannya:
- read the work of beads based on the weaving pattern;
- read the model of a bicycle, vikorist paper and unattributed material;
- develop creativity, artistic taste, and the ability to carefully present a gift;
- value neatness, efficiency, love for creativity, respect and passion for loved ones.
Materials and tools:
Colored cardboard;
- beads in black and yellow colors;
- drіt for beads;
- green color floss threads;
- a stick, bobbins for beads;
- knives, olive, ruler;
- stand (holder) for kits;
- Glue "Titan".
Pokrokove vikonannya roboti.
Before we finish making forget-me-nots from beads, I want to tell you a legend about these lower, even dearer colors.
As if the goddess of flowers, Flora, descended to earth and began to bestow names on flowers. I gave it to everyone and wanted to drink, but suddenly I felt a faint voice behind me: “Don’t forget me, Floro! Give me what I deserve!” Flora looked around - no one was visible. I wanted to come in again, but the voice repeated itself. And then Flora noticed a small black flower in the various grasses. “Good, be a forget-me-not,” said the goddess. At the same time, I endow you with miraculous power. You turn back the memory of these people, as if you were beginning to forget your loved ones and your father’s history.
First stage. Forget-me-nots.
Let's get to work. We cut the edges 15 cm. We string 11 black beads and lock them in a ring.
We collect 11 beads again and hand over another ring from the first.
Forget-me-not will be made of five pellets. Let's collect three more 11 beads.
The skin ring-pellet may grow almost one to one.
We take the round pellets and twist them tightly at the base of the crown to secure them. In the middle we insert one large yellow bead. Forget-me-not is ready.
To ensure that the stem of the flower is stable, add a piece of thick cotton wool and a thread of green colored floss to wrap around it.
Robimo has a lot of black forget-me-nots, and a bunch of Viyshov garniy bouquets.
Forget-me-nots.
It's almost invisible,
Don't spoil them!
And who only guessed -
Cheerful, cheerful?
Perhaps they tore it out,
The sky is like a laptop,
The little ones were enchanted
And they made a ticket.
E. Serova
Another stage. Bicycle preparation.
Looking for wheels for our bike. On colored cardboard we outline the circles from the bottom, we see that there are a large stake and two small ones.
We cover the rolls on both sides with colored cardboard.
We cut the dough 1 cm wide and glue the wheel blanks.
Open the wheels and insert a stick between the two wheels.
We wrap the stick with corrugated purple paper near the wheels. We cut a 12 cm thick cardboard strip and wrap it with paper.
We glue the glue to the bottom of the stick and connect it to a small wheel.
Let's add another small one, a little more to the bottom of the bucket and glue it to the bike. This will be a stand for a container of quaffs.
Zrobimo kermo. We cut two sections 1.5cm wide, 10cm long and one 13cm long. Cover with colored paper.
Let's look at the dark skin like in the photo. This will be a bicycle carrier.
We glue the kermo to the small wheel. The axle is ready for our bicycle to transport cities.
On the wheel ta kermo dodamo namistini. The smell will add completeness to the bicycle model.
Third stage. Setting colors.
For kvitiv we took a candle and a candle. It suits us well both in shape and color. They opened the wax and installed the valves. For the durability of the colors, we added a little extra plasticine.
Glue the container onto the stand. The forget-me-nots on a bicycle look so gentle and furious.
They didn’t manage to put the black boxes near the cebro, as the bullets flew at them!
Have mercy on our little miracle from all sides. “BICYCLE POSHPOTS FOR A BOUQUET WITH TSUKEROKS” by Valentina Pogorelova
MEISTER-CLASS “BICYCLE POSHPOTS FOR A BOUQUET OF ZUKERKOV”
Pogorelova Valentini.
Marvel at how beautiful Valentina has created! The master class is very meticulous, let’s read it!
.
Bicycle dimensions:
- Height 18 cm
- Dovzhina (from the rear wheels to the front wheel) 33 cm
- width (between the rear wheels) 18 cm
To prepare the bike we need:
- drіt 2-3 mm
- white tape stitch
- 4 white gudziki
- “Moment” glue (or thermal gun)
For this bike, I used a floral cutter 1 mm 40 cm thick.
If it is possible, it is better to take 2-3 mm of skeins.
I had to wind up two or three darts at a time to get to the bottom line.
1. We begin the preparation of the large front wheel.
For whom it is important to drink a stake.
(It’s best to work on a consistent basis with the look of the jar, so that the result is more equal)
A wheel with a diameter of about 14 cm comes out of a 40 cm hole (which is the maximum hole in my case).
2. Wrapped with tape-stitch
3. We proceed to the preparation of the two rear wheels.
For this purpose we take 25 cm diameter wheels. The wheels have a diameter of about 8 cm.
It’s the same as for the front wheel.
(So that the colas were equal, I used a jar of cream for the base)
The result is that we have 3 parts.
4. Robimo "spokes" for wheels. True, we will have stinks from the appearance of the curls.
For a large wheel you need 6 pieces of 14 cm wedges, for two small wheels – 6 pieces of 10 cm each.
We wrap the fabric with a tape stitch. I viginaemo
5. We begin to prepare the bicycle frame. There you go.
For the frames we take 2 pieces of 40 cm each (for the frames themselves) and 2 pieces of 20 cm each (for the curls on the frames)
6. We wrap the yarn with a tape-stitch and remove other parts in the same manner as for wheels.
Firmly curl up to a 40-centimeter base, extending 10 centimeters from the edge of the base.
7. The edges of the frame, from which we have added 10 cm, can also be twisted and peeled off such blanks for the frames.
8. We turn to the wheels.
Everything for the rear wheels is made from a length of 13 cm. Wrapped with a tape stitch.
9. We prepare white chucks, which will be used for securing the wheels and axles.
For this reason, the legs of the Gudziki are considered to be as flat as possible.
(If possible, you can find white furniture plugs that cover furniture fastenings)
10. Let's try it on and attach the curled spokes to the wheels
8.
11.Z drotu 40 cm robimo kermo
12. We connect the rear wheels together.
This is the most complicated moment in every process.
(I tried to get more “Moment” glue. For this, I had to trim the parts for a long time until the glue “spilled.”
Glue from a thermo-gun I just pulled out of the parts if I tried it before)
13. Then we tighten the kermo to the front wheel.
For this purpose, the wheel is wound up and the joint is secured with glue.
Then the whole place is “closed” with buzzers.
14. Once the wheels are dry enough, we proceed to attach the frames and kerma to each other.
15. Easily bend the frames and bend the longer end of the frames in such a way that they can be placed on the entire rear wheels.
Robimo "fitting in"
16. Carefully use a tape stitch to connect the frame to the whole
17. Let’s finish the bike itself by making the “handles” and kerma.
For this purpose we wrap it with tape-stitch.
18. Let's get to the cat on a bicycle.
For the cat we need two stakes.
The bottom of the cat is about 8 cm in diameter. For this purpose, the length of the wedge is 25 cm.
The top of the cat is about 14 cm in diameter. For this purpose, the length of the wedge is 40 cm.
We can use all the same ones with wheels.
19. Robimo “twigs” for the cat, wrapping 4 strips of 40 cm each with a tape stitch.
We twist them with a tape stitch in the middle between each other in this way
20. Until the finished spider, secure it with a tape stitch of about a smaller diameter.
It’s best to do a “fit-on” first and mark the place where the twigs are attached to the stake.
21. Carefully move the twigs, lifting them up the hill.
22. Having completed the “fitting”, tightly stitch it until the twig has a larger diameter.
24. To prevent the cat from looking “naked”, make decorative curls and attach them to the cat’s twigs.
The dovzhina for such curls is 8 cm. Our type needs 8 such curls.
23. In the fire, the twigs appear to be curled.
.
25. Our pot-pot for a bicycle is ready
26. Secure the casing to the frames and axles of the bicycle with the help of a tape stitch.
27. It’s impossible to make a bouquet and put it in the cat.
My bouquet is trimmed on a pinoplex and can be pulled from a cat.
In this manner, when a bouquet is collected, the flowerpot-bicycle serves the new bouquets.
Decorative bicycle with twine and tube. Master class with a little photo
Master class with handicrafts “Power planter – bicycle”
Olga Yurievna Kotlyarova, pre-school teacher, MAOU DOD “Children's Creativity Booth” of the Leninogorsk Municipal District of the Republic of Tatarstan.Master class for high school students, teachers and fathers.
Assigned to master class: decoration for the interior, a souvenir for family and friends.
Friends, I am preaching to you this decorative flowerpot for all your loved ones on the calendar and family.
I've been riding my bike for a long time.
The deaf bows have yogo zupinyu.
I’ll give you flowers and give you a bouquet,
I love these girls.
I’ll give you flowers and give you a bouquet,
I love these girls.
Purpose: Learn how to make a flowerpot-bicycle from non-proprietary materials.
Zavdannya: expand the knowledge in Galusa of arts and crafts, develop creative potential, formulate an ecological and aesthetic culture when working with non-natural materials.
Detailed description for the master class “Powerpot – bicycle”.
Required materials:
- twine thread
- thick cardboard
- Olivets
- cocktail straws
- glue "Titan"
- what grains
- knives
Robot head:
1. Take a piece of cardboard, apply an object that closely resembles a wheel (for example, a reel of tape), trace it, mark it. For one wheel you need two pieces of cardboard, they need to be glued together. It is necessary to make 3 such bases for the wheel.
2. All pieces are wrapped with jute twine.
3. Take a cocktail tube, hold it 2 centimeters until it bends and then cuts it - these will be the spokes of a bicycle, which is necessary for the durability of the structure. For one wheel you need 4 blanks. Since there are 3 wheels, you need to make 12 pieces. Then wrap all the pieces with twine.
4. 4 blanks, wrapped with twine, glued together with “Titanium” glue, axle like this.
5. This structure is inserted into a circle of cardboard, wrapped with twine. The wheel is ready. A bicycle needs 3 of these wheels.
6. Take the whole grain and glue it to one side of the back of the bicycle wheel.
7. Take a cocktail tube, measure 2 centimeters before bending and 3 centimeters after bending, cut. We need 2 such blanks for kerma. Now they need to be united among themselves.
8. Kermo is wrapped with twine.
9. Take 1 cocktail tube, measuring 11 centimeters, and use this blank to fasten the rear wheels together.
10. In the kerma, as we have obtained, and the parts for fastening the rear wheels, the edges are painted with small-sized coke grains.
11. We take one tube, bend it and stretch it there, bend it. You need to cut the tube from the short side, spread a drop of glue and insert a cut into it so that it becomes blank for the wheels.
12. The resulting structure is wrapped with jute twine. You will need two of these blanks.
13. It’s time to pick up the bike. A straight tube is inserted at the rear wheel using additional Titan glue.
14. At the front wheel, insert the blanks according to points No. 11, 12. For added value, glue it. We paint the front wheel on both sides.
15. A piece of tube 2 centimeters long is inserted between the upper tubes and glued.
16. Those that came out are wrapped with twine.
17. Let’s take into account the important role of the pots (for example, yogurt, top butter). Wrapped with twine and decorated with cavo grains.
18. Glue the kermo and plant pots. Insert one-piece flowers into the flowerpot. The flowerpot near the bicycle is ready.
You can place in a pot any kind of flowerpots that suit you, both artificial and alive.
Good morning, my dear!
Zahalom, I took Sjusen from what was under her hand. Singing, and you will get a bike even easier :)
For this preparation we need all the twine (which is lying around in the storeroom), cocktail tubes, coffee beans for decoration, hot glue and cut-out tiles or cardboard.
From scraps of wall tiles, we cut 3 blanks for wheels (as a template, a reel of large adhesive tape will fit well). For the skin wheel, you can glue 2 blanks to make the wheels stable - this will result in 6 blanks.
We wrap the leather wheel with twine.
We wrap the tube blanks with twine.
We glue it with hot glue in such a way that the cross is at the top.
We insert it at the colo. The wheel is ready (3 such wheels are required). One wheel has a diameter of 11 cm:
We take another tube, bend it and stretch it out a little.
One piece, which is no longer available for the wheels, is inserted into this bent tube. To do this, you need to cut a bent tube a little and insert it directly into it with a drop of glue.
Wrapped with twine. You will need two of these blanks.
For kerma, 2 blanks are cut (2 cm before the bend and 3 after).
Let's get them all together.
Wrapped with twine.
We need one more piece - a straight tube about 11 cm long (for the stability of the bicycle, you can insert skewers of the same size and diameter in the middle).
We wrap the pots with twine and decorate them with cavo grains. Instead of baking, you can use different jars of processed cheese, sour cream, jelly, frosting).
2 rear wheels from the outer side are decorated with kava grains.
For direct preparation, the “kerma” is decorated with grains of the barrel part, so that everything is protected.
Let's start collecting. A straight tube is inserted into the rear wheels, secured with additional hot-melt adhesive.
At the front wheel, while without decoration, 2 blanks are inserted and fixed with glue.
We decorate the wheel on both sides.
A piece of tube (1.5-2 cm) is inserted between the upper tubes and glued.
Do-it-yourself bicycle for kids. Master class with a little photo
Handmade master class "Decorative bicycle from flower pots"
Robot author: Dizhak Olena Valerievna, pre-school teacher, Municipal Budgetary Educational Institution of Children's Education "Budinok Children's Creativity" m. Osinniki, Kemerovo region.Master class of insurance for preschool teachers and all those who need it.
Assigned to master class: The original flower pots themselves can be colored, so you can decorate them in a unique way, adding your own imagination. This original piece, made with your own hands, will become a wonderful gift for a holy occasion or just to decorate your interior.
Purpose: making a decorative bicycle with flower pots.
Zavdannya:
- develop labor skills in independent artistic activity;
- new technology for the production of pot-bicycles;
- develop imagination and creativity;
- Form artistic taste, aesthetic insight.
For work you need:
Cocktail straws,
nylon thread,
glue "Meister"
cardboard,
knives,
A bottle or a little miner,
knives,
namistini,
stitches and sequins for decoration.
Process of preparation
We cut three wheels out of cardboard and wrap them with nylon thread.
We cut the upper part of the cocktail straw (about 2 cm from the opposite sides). To create one wheel, you need to prepare 4 blanks. We wrap the tubes with thread.
We collect the inner part of the wheel and connect the offending parts together.
Vikoristova has 2 tubes. One is stretched, and in the other we cut off the upper part, inserting it into the short part of the tube. We wrap all the workpieces with thread.
Let's move on to the offensive stage: the kerma opening. We cut the upper part of the tube (2 cm before the bend and 3 cm after the bend). It is connected and wrapped with thread.
Let's start collecting the bike. In order to clamp the rear wheels, we need an 11 cm tube, which is also wrapped with thread. At the front wheel, two blanks are inserted and glued with polymer glue. A straight tube is inserted between the rear wheels and fixed with glue.
The role of the pots is to store empty jars of products and pots for indoor rooms. We glue the pot with nylon thread and glue it to the crossbar on the rear wheels. We replenish the potter with quaffs. The width of the satin stitch determines the size of the trojan.
Trim the stitches horizontally. Burn from the right corner diagonally so that you lose the end of the stitch about 1.5 cm. Place the stitch in the left hand, and the burnt end at the right, tightly burn the stitch straight behind the anniversary arrow for one wrap.
We'll add a couple more wrappers until we're halfway through.
Vigotomomo pelyustki Troyandi. Trim the middle of the trojan at the right hand. Push the top edge of the stitch back and down with your other hand. Wrap the stitch once around the middle. I will wrap the stitch around the middle of the trojan again. Continue folding the stitch, wrapping the threads and stitches until you can’t find the required size.
Click on the new page - the trojan is ready.
We decorate the bike with solder and glue a bow to the kermo. Our bike is ready!
