Kviti apples from foamiran: breed master class. Do-it-yourself apple blossom with paper

This type of apple tree neck can be created on this master class, which can be vicorized to decorate the comb by attaching it to a comb, headband, hairpin, brooch, boutonniere, or vicorized in any composition.

How to make apple blossoms from foamiran with your own hands?

To prepare apple blossom squashes you will need the following materials:

white, olive, green extra-Iranian foamiran;
second glue;
knives;
drіt No. 28-30 and 1.2 mm;
foil;
chervona, zhovta acrylic farb;
rozheva dry pastel and vologa servet;
green, olive, salad olive pastel;
green and brown tape-stitch;
Troyandi leaf mold;
mold cattleya.

Vikriyka and templates of apple blossoms

To ensure the blossom of the apple tree, 4 five-pelust stakes for buds and 3 three-pelust stakes for buds are used before the flowering.

Using white extra foamiran, we cut circles for flowers with a diameter of 5 cm. And for buds with a diameter of 3.5 cm and a circle with a width of 1.5 cm.

Apple tree leaves are cut from different shades of green foamiran. We collect 24 leaves of different sizes.

Sepals for flowers and buds are cut from different shades of light green foamiran.

From white flour 1.5 cm wide, cut a fragmented fringe for the larvae of the flowerpots.

Pokrokov's photo of the preparation of apple squash and apple tops (MK)

The buds on the leaves are cut into teeth and then the leaves are pressed onto the press at a sewing temperature and pressed well on the mold of the leaf.

The sepals are heated on a baking sheet at baking temperature and rubbed between the fingers.

The fringe is rubbed between the fingers.

The pellets are cut on a sheet at a wool-mesh temperature and the skin pellet is pressed onto the mold of the boiler.

All pellets are tinted with erysipelas dry pastel, applying the lower erysipelas tint on all pellets in different ways and in the middle of the pellet with light green and yellow pastel.

We take small scissors and cut the legs of the pellets in the middle.

Heat on the stove at seam-warm temperature and coat the skin pellets and the middle of the pellets with boulka.

Take olive and green olive pastel and apply toning along the edges of the leaves.

Take cut No. 28-26 and cut 8-10 cm and glue the leaves to the twisted side of the leaf.

We take foil in 5*5 cm pieces and form balls for the base of apple buds. The foil balls are glued to the surface.

We take three-pellet stakes and glue the base, place the three-pellet cola on top.

This is how three buds are formed.

Apply glue to the bottom of the petal and press it with tweezers.

We take 6-8 cm, make a loop and twist and glue the cut fringe, forming the larvae of the apple blossom.

Peel circles are glued to the molded larvae, the little parts are lifted and pressed.

We take some acrylic paste and apply it to the ends of the fringe.

To prepare apple squash you will need:
* Foamiran white and green color.
* Floristic drit.
* Hot gun.
* Manna grits.
* Threads are white.
* Strong fixation hairspray.
* Knives.
* Dry pastel yellow and rye color.
* Tape stitch in green color.
* Mold catteley.
* Cotton sticks.
* Praska.

Method for preparing apple quintessence:
To prepare the apple color, we need templates. Irina painted on the paper the prepared pellets that we would need for the work and creation of quests. The photo shows how many pellets, leaves, sepals and size indications we will need to create one apple blossom.

We take white, thin threads and wind them on the middle and middle fingers. It takes 7-8 turns and the axis removes such a small skein of thread.

We tie our skein in the middle with the same white thread. We open the loop and remove such larvae.

Take a floral thread (if there is no such thing, you can wrap the corrugated paper with paper. Coat it with PVA glue. You can also twist the tie stitch). There, where we fastened the threads, it drips tightly. The thread is wrapped in the middle of the threads and twisted as shown in the photo.

We have about five such blanks for making apple color. Prepare the bundles by sprinkling them with hairspray. Let’s let it dry for a few hours and continue molding our little ones.

Place a drop of hot glue in the middle of the stand and press it with your fingers. Let us fluff up all the threads with our little neck, and the little things will come out.

Take semolina and add dry pastel yellow color in it. Well, we rub everything together with our fingers.

Dip the larvae into PVA glue and then pour into the prepared semolina.

Our larvae are ready for the preparation of apple juice. The top can be sprayed with hairspray again. Place them hanging, in bunches downwards, to allow them to dry.

Let's get to the pellets. We follow the pastel patterns and drown them with dry pastel on both sides. We put emphasis on details in a chaotic order. Some details are carefully brightened, some are pale, and some are washed out without change, so they are white.

Now we begin the process of molding the pellets. The piece is pressed onto the sheet, folded into a small accordion and twisted. Then we carefully straighten the peles and their bits, stretch them, and pull them on the thumb.

We glue the pellets down to the larvae, applying the glue to the very tail of our peluska.

This is how you see it.

Other pelyas can also be glued in this manner.

The smallest details are processed as follows: apply the part before sanding and sanding until it becomes wobbly. We take it away and lose it in this form.

So we collect two buds from small pellets.

Now we prepare a cotton swab, which we use to create a bud on the apple blossom. Even the apple blossom color shows both the bloom of the flower and the same buds.

Apply glue to the entire pellet and glue it to a cotton swab. Then we glue all the pelyuts along the stake. There are four petals in one bud, or you can glue five. We need two of these buds to make apple blossoms.

It is visible behind the pattern of a pellet made of green foamiran and is visible from it. Next we need to give it a texture. The mold gives texture to our pellets.

On the pellet from the inside out, glue the gel for a moment.

We collect the sepals, apply our workpiece before sanding, wait a couple of seconds and clean it up. The sepal is guilty of bending.

We can do it the same way with other preparations.

Place sepals on the skin bud and glue it.

The stem of the white apple blossom and leaves is wrapped with green tape. The preparations are ready, let’s move on to collecting the apple tops.

Through this we apply the preparations one by one, curing together the apple blossom. The area connected is wrapped with tape.

When our apple top is ready, the apple is cut and the stem is finished with a tape stitch.

The author came up with such a bright and beautiful apple blossom. It becomes impossible to place it on the base. You can make a garnet brooch or hair dye from a knitted needle. You can also collect a bunch of sweet and beautiful apple and apple needles and put them in a vase. Believe me, these apple needles will fit wonderfully into your interior and give it a unique look.

We take white, thin threads and wind them on the middle and middle fingers. It takes 7-8 turns and the axis removes such a small skein of thread.

We tie our skein in the middle with the same white thread. We open the loop and remove such larvae.

We have about five such blanks for making apple color. Prepare the bundles by sprinkling them with hairspray. Let’s let it dry for a few hours and continue molding our little ones.

Place a drop of hot glue in the middle of the stand and press it with your fingers. Let us fluff up all the threads with our little neck, and the little things will come out.

Take semolina and add dry pastel yellow color in it. Well, we rub everything together with our fingers.

Dip the larvae into PVA glue and then pour into the prepared semolina.

Our larvae are ready for the preparation of apple juice. The top can be sprayed with hairspray again. Place them hanging, in bunches downwards, to allow them to dry.

We glue the pellets down to the larvae, applying the glue to the very tail of our peluska.

This is how you see it.

Other pelyas can also be glued in this manner.

The smallest details are processed as follows: apply the part before sanding and sanding until it becomes wobbly. We take it away and lose it in this form.

So we collect two buds from small pellets.

Now we prepare a cotton swab, which we use to create a bud on the apple blossom. Even the apple blossom color shows both the bloom of the flower and the same buds.

It is visible behind the pattern of a pellet made of green foamiran and is visible from it. Next we need to give it a texture. The mold gives texture to our pellets.

On the pellet from the inside out, glue the gel for a moment.

We collect the sepals, apply our workpiece before sanding, wait a couple of seconds and clean it up. The sepal is guilty of bending.

We can do it the same way with other preparations.

Place sepals on the skin bud and glue it.

The stem of the white apple blossom and leaves is wrapped with green tape. The preparations are ready, let’s move on to collecting the apple tops.

Through this we apply the preparations one by one, curing together the apple blossom. The area connected is wrapped with tape.

It's been a month of grass in the yard, and everything is in bloom: cherries, peaches, apricots and apples! This beauty, unfortunately, is not eternal, after a few days the color will fly around and will no longer appease us with its beauty until the coming spring. Let's enjoy spring in our home!

Yak? Mi Let's get some apple gills from paper!

You will need: cut wood or wood, papier, glue, scissors and paper meister class 🙂

Robomo os such a golden apple tree:

Also prepare a potter or a bottle and a filling to plant our Flowering apples from paper. This could be pebbles or other stones, etc.)

Place the stems in a pot, cut the corrugated paper as shown below:

Glue step by step quotes:

Another master class report:

Zrobiti kvituchu apple tree for paper You can also do it like this:

For the robot you will need colored paper, glue, scissors, and some simple paper. How the gills can be vicorized with dry or dry thin pea or berzy gills.

Approximately it might look like this:

We cut brown or green paper into thin strips, and after covering the neck with glue, we wrap it until it is completely covered with a paper ball. Let the glue dry.

On a light paper, on a white paper, the edges of the leaves are visible. We cut them carefully with scissors. We form the flowers and fasten them to the nails with glue. You can use a glue gun.

The rusty shades are already suitable for me, but in the classic version, with white flowers.

The axis looks like this roughly:

And the axis is how you can paint it with glue from a hot-melt gun:

It's spring outside. In the coming month, please enjoy the fragrant blossoms of apple trees, as you will be amazed at the flowers that are white and with a dark purple tint. And during the hour of handicraft, a beautiful knitted needle can be made in different colors from soft paper. Treat dry natural nails in manganese and coat with varnish. Then, from a crepe paper, cut out pellets of different sizes and put them into a bag and glue them to the dry point. Virizans and shaped leaves on the butternut squash give a beautiful, embossed appearance. I ran out of preparations to combine and place near the vase.

To prepare a beautiful soft apple top, we need white and green papier, wood shavings, wood for the composition, PVA glue, pointed knives, olive, two templates (the same axis):

Using the same template, we paint and draw the apple blossom from a white paper.

Several times we fold a white book like this:

from the mouth and the hairs of the hairs, the spines are as follows:

You need to make a hole in flowers and leaves so that you can insert the stem into the core.

Now you need to cut it with a line like a stem, on which you string the stem of the flower, then the leaves, first covering it with glue so that the flower does not get caught.

Secure the finished bag onto the nail, and continue to work on all the other nails. Secure the blanks on the nails.

The apple buttermilk is ready!

Great idea! What could be more beautiful than a plump apple tree? Well, what a squashy peach.)

I would chop up a paper apple tree, but with some natural dry milk, let’s put it this way. We won’t scratch the nails, but we’ll do it with a paper.

It is necessary to select a paper that is as close to the natural colors of apple as possible. It could be rye leaf, fuchsia, salmon color, white, of course, that’s fine.

We scan paper blanks. We will need to make a lot of small flowers. They can be simply painted on paper and cut with scissors.

Now we work with quotations. They are attached to the nails. And the axle can be secured with additional thinly sliced tape. You can also take glue. Hot glue is great for this purpose.

You're looking even more beautiful, the plump apple tree.

The cherry blossom of an apple tree will become an excellent decoration for your home and will carry a spring mood at any time. We'll need it. Pins, glue, papier, scissors, olive, figurine cutter. We cut the leaves and glue them down to the nail.

Very beautiful apple blossoms can be produced from crepe paper. For which we need to make a center for the eggplant, to make the larvae by sifting, we can use either corn grits or semolina. Then we cut out the flower pellets from the crepe paper, paint the tins with some olives, and you can create the flower.

Detailed steps for making such an apple butterfly can be seen in the photo, all the steps can be repeated yourself, and you will have a wonderful apple butterfly. You can also chop up the leaves of a tree. And all the flowers and leaves can then be attached to the top of the apple, and we get a sour apple.

In the spring, beautiful white and delicate russet flowers appear on the apple trees. At this time, sit down and be filled with a wonderful aroma, calm and beauty. Unfortunately, the fruit trees are blooming quickly, and I really want my mother to tell me about the beautiful spring days. An excellent idea would be to make a neck of apple blossoms from a plastic material such as foamiran. Foam cups hold their shape miraculously and look very natural.

First of all, you will need to prepare templates to prepare the apple color. Naturally, professionals can select elements of the required size from the foamiran, focusing only on the moisture content, or Novachkova, who will first break such a virus, rather than risk it.

Don’t worry about creating clear and simple patterns, as they may be similar to those of other viruses, for example, apple blossoms and sakura blossoms.

On the same blossoming apple tree, the buds open unevenly, so to make the composition realistic, it is necessary to create not only the buds that have blossomed, but also the buds.

Master class for making templates for apple color:

For the buds and flowers that have just opened, you will need two pellet templates. The larger pellet has a thin round speck, 2 cm high and 2.5 cm wide. The smaller pellet has a larger concave speckle shape, 1.5 cm long and wide.
The buds that have bloomed also bear one type of pellets. Behind the shape of the vein you can guess a speck. Its height is 4 cm and its width is 2.5 cm.
In addition to the templates of the petals, you are responsible for the layouts of the leaves and sepals. The leaves are 5X3 cm in size. The sepals have a shape with rounded edges. The smaller sepal pattern has a radius of 2 cm, and the larger one has a radius of 3 cm.

These, perhaps, are all the necessary templates for your virus. One hole is made up of two closed buds, one or two fully mature flowers and three or four that have blossomed. For this design you will need 8 small petals, 25 medium ones and 5 large ones, as well as 4 leaves, 5 medium sepals and two small ones.

Apple color from foamiran: processing of blanks

In order for the apple color to look realistic and believable, the leather element needs to be treated with a glaze before removing the gilt. Fortunately, foamiran is even plastic when heated and easily trims its shape after being cooled on the surface. The leaves of the apple tree are small, so it can take an hour to serve them.

We prepare the preparations for apple blossoms:

Take back the vizan pellets from the white foamiran and tone the rye color with a dry spoon. There is no need to prepare the deyaki pelyustki.
Apply medium and large pellets before sanding and twist in a rope. Unscrew the pellets after completely drying.
Just rub the tiny pelyas with the powder until they curl up.
The leaves most often need to be laid out on a sheet of paper and pressed into a mold, otherwise you don’t have such a tool, suitable for corrugated paper, inserts about a tablespoon.
The sepals are applied to the base of the powder and rubbed on it until their skin has a convex shape.
After creaming the petals and leaves, you will also need to prepare the larvae. To do this, wrap your ring and middle finger 6 times with white thread, remove from your fingers and cut across. Secure the top bun to the half-bent bun by twisting the top part. Spray the larvae with hairspray, immerse your finger in PVA glue and press it between the larvae. Coat the ends of the threads with glue and tie them in semolina. After the glue has dried, mix semolina in a yellow color. Collect five such blanks.

Before processing elements from foamiran, be careful to ensure that they do not melt upon contact with the sand. Instead of sanding, you can use a curling iron or a wood burning machine, set to the minimum temperature.

Master class: apple tree with foamiran, picking the top

Once all the elements of preparation have been prepared, you can move on to the most important stage - collecting the next few cells into one composition. You will need a green color and a brown floral trim. These materials can be purchased from a tea store.

If you do not have a suitable paper, you can replace it with a corrugated paper in a green color.

In addition to all the ingredients and materials you have processed, you will need to prepare another glue gun, which is best suited for attaching the pellets to the surface.

Collected from apple stems:

In order to collect the flower that has blossomed, you will need 5 great pellets. They need to be glued to the surface under the previously formed larvae so that the lower parts of the skin stick together one after another. Glue a larger sepal under the petals.
The buds have blossomed and come from five petals of small size. To the base of the larvae, five small pellets are glued along the stake with a slight overlap, one on one. A great cup leaf sticks to the bottom. Get some of these cards.
Now I have lost the ability to prepare two closed buds. To do this, stick a piece of ear stick and some medium-sized pellets onto the cotton wool so that the cotton base lies behind them. Cut the stick just below the petals and transplant them onto the ground. Attach the sepals to the bottom and make two such buds.
Wrap the skin element with green or brown stitching.
Take the first closed bud and attach two leaves from the sides of the next one behind the same floral stitch, instructing one open bud to grow from the right leaf. On this same side, from the other side, wrap another stem with the same flower. Attach a mature flower and leaf under them. Next is a closed bud, and on the other side there are two flowers and a leaf.

You may end up with a small apple tree. You can adjust the amount of colors for an additional amount.

Virobi with apple tree and foamiran

From individual apple blossoms you can make a lower thinning wreath. To do this, you need to attach one flower, one bud and one leaf, to the skin. Then weave all the prepared elements into a circle that matches the size of your head and diameter.

A wine made from apple blossom can be further decorated with resin or rhinestones.

You can also make a pin from these colors by attaching a foamiran needle to a crab or a design with a clip. Apple blossoms are very similar to sakura, so if you use rye foam instead of white foam for making, they are perfect for creating a painting in the Japanese style.

Robimo kviti apples with foamiran (video)

Preparing knuckles from fruit trees is a laborious and time-consuming process, but the excellent result is more than worth the hour spent.