Great is the Trojan with Tsukerok. Trojans from tsukkerok with their own hands, little by little. For robots we need

8 Bereznya – this is holy spring! And all women, of course, should take away gifts from gifts. All the stinks may have the power to wilt, but you see how miraculously it is that your bouquet pleases your beloved for more than one day, and not even three, but as long as you want it! Don't believe me? And for free! Talk about a bouquet with paper, it’s not simple, but corrugated!

This bouquet is not only bitter, but also contains a sweet surprise - the cherries in the middle of the buds! So the gift will be not only beautiful and practical, but also delicious! You can create such a bouquet for your skin. And the axle itself - show us our master class.

What do you need to make Trojans from corrugated paper?

Corrugated paper in rye and olive colors. It is important to know that the papier is special, floristic, and not ordinary. It has a stiffer structure and is easier to work with.

• Threads of green color and rye.
• Knives.
• Glue.
• MK uses olive glue, or you can use basic PVA.
• Wooden skewers.
• Double-sided adhesive tape.
• Foil.
• Polyfoam.
• Tsukerki are rounded. At MK, tsukerki “Olenka” are being vikorized.

Now let’s take a closer look at how to create such a miracle trojan on your own.

1. Tear off a piece of foil and prepare a wooden skewer and skewer.

2. Burn the tsukerka as shown in the photo. Wrap the tails of foil and secure the skewer.

3. Using additional tape, secure the foil and skewer once again, so that you can remember that they are well stuck together one after another.

4. Take a corrugated russet papier. Place a 3 cm wide roll of stitching on the roll. To restore your respect: you need to work along the embossing lines, and not perpendicular to them! It’s important, and just to be kind to you, no bouquet was ever seen.

Then cut the mixture into straight cutlets 7 cm high.

5. In the same manner, bend another rectangular curl of 7 cm, or even 9 cm wide.

6. Round the tops of the workpieces.

7. Take a wide piece and stretch it a little in the middle with your fingers.

8. Using a wooden skewer, carefully pull out the ends of the paper, immediately curling the edges.

9. Using all the same skewers, use the same skewers to twist the edges of the pastry, giving it a natural look.

10. Prepare 10 of these blanks. In this case, burn the edges of half the pellets, and the middle of the other five.

11. We begin to pick the bud. Wrap the zucchini in a wide piece (one that is 9 cm thick). Sunburn the papier over the malt, pull a little on it, so the bud will be “more mellow.”

12. Tighten the skewer with thread, securing the skewer.

13. If necessary, you can twist the very middle of the bud with your fingers to grab the chickpea.

14. We collect other pellets. We take the ones that have the edges twisted in the middle first, then the ones that are missing. The kidney can be fixed with a skin thread. Ale, if you are ready, you will cope with the burden and get rid of everything immediately.

15. If all the blanks are knitted, in your hands you will see a ready-made, incredibly beautiful card!

16. Now the bud must be planted in a sepal. For this purpose, select a green corrugated paper about 12 cm wide and 7.5-8 cm high.

17. Place the leaves as shown in the photo.

18. Wrap the workpiece around the bud, secure with thread.

19. Cut a thin strip of 0.5-0.7 cm wide from a green paper, apply glue to it and wrap it around the thread masking it, and then around all the skewers.

20. We have a viishla pishna, a garna Troyandochka. And now we’ll show you how to grow a small bud. For this creation you will need only two pieces. Remember, they are wide, 9 cm each. Alternatively, make one of them not 7 cm high, but 6 cm high.

21. On the top edge of the workpiece, burn the middle, and on the bottom edge of the pastry, burn the bottom.

22. I sunbathe the chickweed bud in a pellet bowl, and then, I prepare it in the bottom, and we remove the beautiful, bottom bud.

23. Well, then, get ready. For the bouquet that was placed on the cob of MK, 15 Trojans were needed. And now let’s prepare the greens: leaves, peppers, etc. With them the composition looks complete. Mostly from grass like sedge. Make a 10 cm x 13 cm rectangle from a green paper, cut the leaves, roll the edge with your fingers, fix them on a skewer.

24. We cut a hole from the wider leaves. Prepare narrow straight cutlets of varying heights, and brown the tops. Flatten the middle of the pieces, burn the edge with a skewer.

25. Tie a bunch of such leaves with thread, fixing them on skewers.

26. The time has come to start picking a bouquet. Have a reliable miner secure the polystyrene sheets with double-sided tape.

27. For your sake, you can vikorize everything you need in advance. A cut erysipelas papier was taken from MK.

28. In the middle of the potter, insert the largest one into the polystyrene foam and write your trojan. You will be the center of the composition. Kill her and start collecting the bouquet.

29. Since all the pots are in place, the bottom of the pot can be painted with a little brush, or it can be left alone.

30. For the beauty and integrity of the composition, the potter itself was covered with corrugated paper in a green color. Use some double-sided tape to secure it.

31. The potter can also be decorated with a bow with satin stitches in a green color.

32. If you have decorative sunflowers, babkas or snowstorms - feel free to decorate your gift with them! This will add amazing charm to your bouquet. MK has a grandmother who is vikorist.

33. Bouquet ready!

Give your children and relatives, mothers and grandmothers, sisters, aunts and nieces the wonderful licorice of Trojans until the 8th of February! This joyful time will be remembered not only by its beauty, but also by its sweet taste.

A rosé bouquet of tsukkeroks screams for burying, but marvel at something new - and you can create one like this today!

If you need to create a beautiful present, don’t rush for cakes and chocolates, try to combine two surprises into one, creating a delicious bouquet, in which the three tsuckers and corrugated papers look just right. Such a luxurious gift can be given on National Day, 8 Bereznya, Teacher's Day and commemorate the artist's life in the theater. There’s not a lot of money for an hour, but the pennies are like tens of karbovantsi.

Preparation of materials for creativity

The following tools and materials are required for the work:

• tsukerki;
• corrugated paper in rye and green colors;
• green strip stitch;
• green stitch for decoration;
• bamboo sticks;
• organza in white color;
• white satin stitch;
• polystyrene;
• cardboard tube made of foil;
• narrow tape;
• knives;
• visionary universal glue "Dragon".

Instead of horned ones, you can make red, yellow or burgundy trojans, all stored in the setting and drive. If you have anything new, take a look at it.

Master class for picking a bouquet

Start by working with trojans with paper and tsukerki. Secure the tsukerka by the tail to the bamboo stick with thin tape. Hold the rectum from the corrugated erysipelas paper, flare it 180 degrees in the center and stretch the middle of the skin half of the rami with your fingers.

Wrap the zucchini in a bow and secure with tape. In another straight cutter, round off two cuticles. Stretch the rounded edge with your fingers. To create a convexity at the rectum, stretch the papier along the side of the rectuple at its middle.

Wrap the part that came out with a tsucker. Fold the paper several times, so that you can see a bunch of pellets at once. The shape of the pellet can be approximate. You can make a simple oval.

Stretch the upper edge of the pellet and create a convexity in the middle of the pellet, giving it the desired shape. Prepare a bunch of pellets at once.

Attach the pellets in a spiral until the shape of the flower is complete.

Using a green corrugated paper, cut the petiole of a flower. Fold the papier 4-5 times and cover it with a trikulet.

Rotate the part around the trojan from the notch and fix it. Using your fingers, apply the required amount to the green bundles.

Wrap a bamboo stick with green tape.


Similarly, make the necessary number of troyands from corrugated paper with a cutout in the middle.

Prepare the basis for the zucchini bouquet. Use a knife to shape the polystyrene foam into the required shape. Punch a non-drilling hole in the center of the polystyrene foam and insert a cardboard tube. For reliable fixation, use universal glue.

Decorate the polystyrene foam with green corrugated paper and the tube with tape stitch. Attach 15-20 cm of decorative stitches to several rows behind the trap stitch, which is then divided into thin stitches.

At the base of the bouquet, insert trojans with tsukerki, and behind them apply a drop of glue to the puncture points.

Twist the edges of the decorative stitch by lightly running a knife along them. Wrap the base of the bouquet with white organza, folded in two. Secure with thin tape. You can pinpoint the inner organza ball to the base of the bouquet using universal glue. Tie a wide satin white stitch in a bow over the tape.

A bouquet of tsukerkas with lower trojans is ready! Use your imagination and don’t be afraid to experiment.

We will be glad to welcome you in our groups for buried wives and friends! In your classmates you can not only admire the robots of other handicrafts, but also sell your own robots.

It’s easy to make tabletops with your own hands, so even a child can escape from these tasks. Available materials, plenty of time and a little imagination - the axis and everything you need to create natural flower detail.

Materials and tools

To create a trojan from a corrugated paper with your own hands, beginners will need to add special materials and tools.

First of all, it's a corrugated paper. As the founders of this mystery mean, this material itself allows you to create a masterpiece of nature in the most natural way possible. It’s just not a good idea to experiment with colors: it’s best to give your best to natural tones: green, red, yellow and white palette.

In other words, tools. These are stencils, tape stitch, scissors, olive, glue in the shape of an olive or a gun, etc.

The above is the minimum set that can be added depending on which project is being completed.

Unusual bouquet of Trojans from corrugated paper

Such a bouquet of trojans can be made for a newbie. For this you need a roll of corrugated paper approximately 10 centimeters wide, medium size, a glue gun and scissors.

The first thing to make is to cut the blanks from a corrugated strip of 60 centimeters. For the cob, prepare 10 pcs. Next, fold the leather piece in width by a third and begin to twist it so that the bent edge appears at the bottom of the fold.

Once all the pieces have been created, attach them to the butt using a glue gun. It is necessary to work in such a way that the surface of the cooler is not visible between the pots.

Before speaking, such bouquets can be considered not only as a gift, but also as an element that gives the interior a special touch. To create the remaining trace, take a small diameter, for example, 6-8 centimeters.

Bouquet for fun

It’s even easier to make Trojans from corrugated paper with your own hands and make a cheerful bouquet from them.

For this you will need soft brown and dark green corrugated papier, golden foil, round chocolate chips, golden metallic thread, scissors, green thread, tulle and a bag for kvits.

The papers themselves are gradually embossed in this way. For the cob, a queen is formed. To do this, cover the skin with foil and tighten it with thread.

Afterwards, a green cup is drawn from the green paper. It’s easy to make: just make a “crown” out of the green rectucus.

The bud is wrapped with a fillet blank, secured with glue, tightened again with thread and the ends are cut diagonally.

The kvitka is ready.

To give a romantic and delicate look, the skin bud is wrapped in milky tulle, as if it were to be treated with regular hair.

A large number of such buds lie beyond the invented design of the cheerful cat of the Trojans. It’s easy to secure it in the cat’s bag. For this stem, place it on polystyrene foam or a floral sponge.

As you know, making Trojans from corrugated paper with your own hands is very simple. Golovnya - master the technique of witchcraft and express your imagination.

To create a welcome surprise from the flowers, it’s not at all obligatory to give a bouquet of live flowers, you can make them with your own hands. And as an additional bonus, take away the licorice bonus from the appearance of the tsukkerok. All it takes is one bunch of trojans that are created in the minds of home. Our master class allows us to implement this idea in life.

Master class: Trojan with tsukerok

Such a master class allows you to create a bouquet based on trojans, like making tsukerok and corrugated paper.

For robots you will need:

• Red corrugated papier
• Green corrugated papier
• Knifes
• Hot glue gun
• Tsukerka
• Great wooden skewer

Preparation process

• Take a red corrugated paper and cut a rectangle of 7.5 cm at the edge. Why bother the middle of the Trojans? The upper edge of the rectangle is rounded to give the shape of a pellet. After cutting the pellets, stretch them, tearing off the workpiece.
• While the trojan is being prepared, plug the glue gun into a power outlet to light it up.
• From the red corrugated paper, rectangular cut-outs for trojan pellets are cut. For a flower you need 12 pellets.
• The upper cut is rounded with scissors and the lower cut is rounded off with little bits. To create symmetrical cutlets, you need to fold the straight cutlets completely.
• Once the pellets are ready, take one wooden skewer and screw the top of the skin skewer onto it to round it out. Afterwards, stretch the pellet with your fingers.
• Start by snatching the tsukerka from the kvitka. There is no need to glue it with anything. It is enough to grab the tsukerka from the middle of the workpiece for the middle of the troyandi, so as to create a viishov bud.

• Take a glue gun, drip a drop of glue onto the base of the bud in the lower part and glue it with a wooden skewer.
• Proceed with gluing the pellets. Glue 3 pellets to the first row. Glue 4 pellets on the other row. The third row will be the outer one and includes 5 pellets. What came out was a gorgeous and very colorful trojan with a zucchini in the middle.
• To create sepals, take corrugated paper in a green color and cut a 2x4 cm section. The sepals are cut from this. There may be approximately 4-5 pieces.
• In order for the sepals to look natural, you need to slightly twist their upper coils. The base is stretched using your fingers and attached with a hot glue gun to the bottom base of the card.
• To create the bottom of the flower, you need to apply a speck of glue to the base of the sepal and glue a piece of corrugated paper, twisting it to the very end. Coat the tip of the paper with glue and glue it to a large wooden groove.

How to earn an English Trojan with tsukerok: master class

There are many ways to defeat the Tsukker Troy, one of which is the English Troy.

For robots you will need:

• Tsukerka
• Great wooden skewer
• Knifes
• Yellow corrugated paper
• Green corrugated papier
• Hot glue gun

Preparation process

• Take corrugated paper in a yellow color and cut it into a 7cm wide strip. For this mixture, cut straight cutlets with an edge of 5 cm. These will be blanks for buds. Kozhen straight-cut matime size 5x7 cm.
• You also need to make 12 pellets 3 cm each and 5 pellets 4-4.5 cm each.
• Troyand begins to work on the bud. Take the blank for the middle of the bud, fold the rectangle straight across and round the top edge with scissors. So carefully prepare the bud blanks and stretch them using your fingers.
• Take a skewer, a skewer and a pellet. Apply glue to the pelyuska, insert the tsukerka in the middle, wrap the pelyuska around the tsukerka, insert a skewer and glue the stem. So just apply the glue to each other and glue it on the other side. Viishov's little bud.
• Rob the pellets for the Trojans. The leather pellets are folded in half and the upper edges are rounded. So lavish yourself with pellets.
• Take the pellet and stretch it with your fingers. So care with the skin pelyus, giving it a convex shape.
• Take the pellets, apply glue to the inside of the base and glue to the bud. So glue the pellets overlapping one on the other.
• The first colo consists of 4 pellets. Another number of 4 pellets. The third round is just 4 pellets.
• These pellets, which are 5 cm wide, round the edges with a skewer. After this you need to stretch it with your fingers, giving it a rounded shape. These pellets will be opened.
• Glue the remaining row of open pellets.
• Take green corrugated paper and cut a 6x8 cm strip. Cut out the leaves of the sepals. The leather sheet is rounded with your fingers to give it a natural look. Stretch the base of the sepal with your fingers and coat it with glue, then glue it to the base of the flower.
• Twist the edge of the green corrugated paper, stretch it with your fingers and stick it on the stem, wrapping it and gluing it to the tip of the paper on a wooden skewer. An English Troy with a tsukkerka in the middle came out.

There are no obvious ways to create the Trojan from Tsukkerok. Vikorist videos can be created as a master class.

Video on statistics